What kind of engine oil should be used for CFMOTO SR?

1 Answers
StSpencer
07/30/25 8:36am
CFMOTO SR should use semi-synthetic engine oil. Smell of engine oil: Qualified engine oil has no special smell, with a slight fragrance, and the gasoline performance is relatively mild. If there is a pungent smell, especially a strong fuel smell, it is likely to be recycled engine oil. Method for observing engine oil: Check through oil drops. Drop a drop of oil from the oil pan onto white paper and observe the oil drop. If the black spot in the center of the oil drop is large, dark brown, uniform, and without particles, and the surrounding yellow infiltration is small, it indicates that the engine oil has deteriorated and should be replaced. If the black spot in the center is small and light in color, and the surrounding yellow infiltration trace is large, it indicates that the engine oil can still be used.
Was this review help?
3
3
Share
More Forum Discussions

How to Remove the Main Airbag of Peugeot 408?

Locate the screw holes on the left and right sides of the steering wheel and loosen them using a T40 tool. After loosening the screws, detach the driver's airbag from the steering wheel, but do not remove it completely. Use a small flat-head screwdriver to release the fixed clip of the wiring harness, and then use the screwdriver to detach the yellow locking mechanism of the connector. Use the small flat-head screwdriver to release the black part of the connector. Once the main airbag wiring harness is disconnected, remove the main airbag.
20
1
Share

How to reset the maintenance reminder on a Volkswagen Polo?

First, turn off the ignition key. Press and hold the maintenance reset button, then turn on the ignition key while continuing to hold the button. Wait for a moment until the maintenance interval indicator enters reset mode. Release the maintenance reset button, then press the button (Button A) within 20 seconds. The indicator will return to normal display and the maintenance light will be reset.
18
3
Share

How to Reset the Tire Pressure on a 2020 Mitsubishi Outlander?

First, inflate the tires to the normal pressure range. Start the engine. Use the control buttons on the left side of the steering wheel to operate the trip computer. Find the "Tire" option and click to enter. Press and hold the trip computer control button on the left control panel to reset.
18
4
Share

How to Drive Out When the Distance Between Cars is Small During Parallel Parking?

Drive forward until parallel with the front car, maintaining a distance of about 20 centimeters between the two vehicles, then turn the steering wheel fully to the right and reverse. After seeing the full view of the rear car's front in the left rearview mirror, straighten the wheels while turning the steering wheel fully to the left. Once the car body is level, straighten the wheels.
1
0
Share

How to Adjust the Height and Left-Right Alignment of Car Headlights?

Choose a flat surface, with the wall head five meters away from the wall, ensuring your body is perpendicular to the plane of the wall. The left and right heights should be the same. Drive the car into a flat, open space, measure a distance of 30 meters, and ensure the light beam is appropriate at both near and far distances of 30 meters.
18
0
Share

How to Deal with Blackened Diesel?

It can both saturate olefins and break down nitrogen-containing compounds. Extraction process: A solvent is used to extract nitrogen-containing compounds, which is effective and low-cost, representing a proprietary technology. First, let the diesel sit for a period of time to allow full oxidation and discoloration, and then distill it.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.