What kind of engine oil should be used for Cadillac XT4?

Do Children Count as Overloading in a Car?

Children in the car are considered overloading as long as the number exceeds the approved passenger capacity. Overloading of passenger vehicles is calculated per person, and exceeding by even one, whether an adult or a child, constitutes overloading. Overloading can result in fines ranging from 500 to 2000 yuan and a deduction of 6 to 12 points from the driver's license. Below is an introduction to vehicle overloading: 1. Traffic Safety Law Provisions: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," traffic management authorities impose administrative penalties on drivers for road traffic safety violations and implement a cumulative scoring system (hereinafter referred to as scoring) for such violations, with a scoring cycle of 12 months. 2. Penalties for Overloading: If a driver accumulates 12 points within a scoring cycle, the traffic management authorities will confiscate their driver's license. The driver must then participate in road safety laws and regulations training and pass an exam. If the exam is passed, the points are cleared, and the license is returned. If failed, the driver must continue training and retake the exam. If a driver does not accumulate 12 points within a cycle and has paid all fines, the points are cleared. If fines remain unpaid, the points carry over to the next cycle.

10

5

Share

Is the headlight turned on in Subject Three the low beam?

Headlights refer to the vehicle's high beam, low beam, and turn signals, with the low beam being a part of the headlights. When using a car, the requirements for headlights are: They must provide good illumination while avoiding dazzling oncoming drivers. Keep the headlight lens clean: Especially when driving in rain or snow, dirt and grime can reduce the headlight's illumination performance by up to 50%. Some vehicle models are equipped with headlight wipers and washers. When two vehicles meet at night: Both vehicles should switch from high beam to low beam when they are 150 meters apart to ensure driving safety. To maintain the performance of the headlights: After replacing the headlights or every 10,000 kilometers driven, the headlight beam should be checked and adjusted. Regularly inspect the bulbs, wiring sockets, and grounding for oxidation or looseness: Ensure that the connectors have good contact and the grounding is reliable. If the connections are loose, turning on the headlights may cause current surges due to circuit interruptions, which can burn out the filaments. If the connections are oxidized, the brightness of the bulbs may decrease due to increased voltage drop at the connections.

19

5

Share

Where is the trunk switch located on the old Audi A6?

Audi A6's trunk switch is located in the middle of the rear license plate. The specific position is inside the groove right below the four rings. Three methods to open the trunk of Audi A6: Directly open with the remote key: The remote key can also open the trunk (after the engine is turned off and the key is pulled out). Press and hold the "car logo" button in the center of the remote key for 3 seconds (the one between the unlock and lock buttons), and the trunk will automatically unlock, but it won't open directly. You still need to lift it manually. Open with the mechanical key: There is a keyhole above the license plate. Insert the key, turn it to unlock, and then lift the trunk lid. Press the unlock button directly: Press the unlock button directly (in the middle of the rear license plate), and the trunk will also unlock and open. Precautions for using the trunk: Be cautious when closing the trunk lid to ensure no one is between the lid and the trunk to avoid injury. After closing the trunk lid, check whether it is properly closed and locked to prevent the lid from suddenly opening while driving. The closed trunk lid should be flush with the surrounding body.

20

0

Share

Do pure electric vehicles require annual inspection?

Pure electric vehicles require annual inspection. Electric vehicles are also licensed motor vehicles, which are inspected every two years within the first six years, and once a year after exceeding six years. Documents required for pure electric vehicle annual inspection: "Motor Vehicle Inspection Mark Application Form" (no need to bring, provided on-site for direct filling). Motor vehicle driving license. Compulsory traffic insurance certificate. Vehicle and vessel tax payment or tax exemption certificate (usually purchased together with compulsory insurance and can be found in the compulsory insurance policy; if not found, inquire with the insurance company, as some regions may handle this separately). Owner's ID card. If handled by someone else, the agent must bring their own ID card. Regulations for vehicle annual inspection: Operational passenger vehicles are inspected once a year within five years, and once every six months after exceeding five years. Trucks and large and medium-sized non-operational passenger vehicles are inspected once a year within ten years, and once every six months after exceeding ten years. Motorcycles are inspected once every two years within four years, and once a year after exceeding four years. After exceeding six years, private vehicles with nine seats or less within ten years are relaxed from annual inspection to biennial inspection. That is to say, private vehicles within ten years only need to undergo online inspections in the sixth and eighth years.

19

1

Share

What are the key reference points for automatic transmission right-angle turns?

There are four techniques for automatic transmission right-angle turns. Technique 1: Keep the right side of the vehicle close to the outer right-angle edge line while moving forward. When the midpoint between the triangular windows of the left and right front doors aligns with the inner and outer right-angle lines, turn the steering wheel fully left or right, then straighten when the vehicle is aligned. Technique 2: Proceed in first gear without accelerating; stay as close as possible to the right boundary line during the turn. When the seatbelt anchor point inside the cabin passes the corner, turn the steering wheel sharply left until fully locked. When the front of the car aligns with the exit, quickly straighten the wheel to prepare for the next right-angle turn. Technique 3: Proceed in first gear without accelerating. When entering the test area, stay close to the right curb. Once the front curb is obscured by the hood, turn the steering wheel sharply left until fully locked. When the front of the car aligns with the exit, quickly straighten the wheel. Technique 4: Before entering the right-angle turn, drive slowly while keeping the vehicle as far as possible from the turning point marker between the boundary lines. When the center of the small triangular window on the side closest to the turning point aligns with the turning point, turn the steering wheel fully toward that side. After passing through, straighten the wheel when the front of the car is aligned.

15

3

Share

What is the sequence of turning on lights for the wet road surface in Subject 2?

Subject 2 wet road surface light sequence includes turning on high beams, fog lights, width indicator lights, hazard lights, and wipers. Below are the techniques for turning on lights on wet road surfaces in Subject 2: Slow down the vehicle: Shift to 1st gear and steadily enter the test area. When entering muddy roads, drive at low speed, adjust direction to keep the decorative strips inside the yellow line. Remember to slow down and avoid crossing the line. Maintain steady speed: Try to maintain a stable and uniform speed throughout the route to avoid speed changes or body vibration issues, and do not stop, otherwise it is easy to be judged as unqualified. Listen to the voice prompts and stay calm: When the front of the car crosses the finish line, you will hear the voice assistant say "This project is over". At this time, you must drive steadily within 5 seconds and turn off all lights and wipers. Also, do not remove your hands from the steering wheel. Do not be nervous about additional test items, the most important thing is to adjust your mindset. Before getting in the car, you can wipe the rearview mirror and windows clean, and do not close the windows too tightly to prevent fogging. Controlling the speed slower will reduce tension and give yourself enough time to think and prepare.

18

4

Share

What kind of engine oil should be used for Cadillac XT4?

Do Children Count as Overloading in a Car?

Is the headlight turned on in Subject Three the low beam?

Where is the trunk switch located on the old Audi A6?

Do pure electric vehicles require annual inspection?

What are the key reference points for automatic transmission right-angle turns?

What is the sequence of turning on lights for the wet road surface in Subject 2?

What to Do When Someone's Car Blocks Yours?

What is the normal power generation for Volkswagen Tiguan?

What are the reasons for failing the slope test in Subject 2?

Can the Subject 1 Test Be Taken on Saturdays and Sundays?