What kind of engine oil makes the UY125 engine quieter?

1 Answers
Henry
07/29/25 11:03pm
Fully synthetic engine oil. If the warranty has expired, there's no need to go to the 4S shop. You can buy the engine oil yourself and then pay a labor fee at a shop to have a mechanic perform the maintenance. Below are some related tips for saving fuel on motorcycles: 1. Let the engine run for about a minute before starting to move: Starting to ride immediately after ignition not only wastes fuel but also increases wear on engine components. 2. Start in a low gear, grasp the right timing, shift gears promptly, and try to maintain a moderate speed: Higher speeds increase air resistance, leading to higher fuel consumption. Lower speeds require lower gears, reducing the engine's power utilization efficiency, which means more fuel is needed to cover the same distance. 3. Regularly clean the air filter: Ensuring sufficient clean air enters the cylinder allows the fuel in the cylinder to burn more completely, resulting in lower fuel consumption.
Was this review help?
4
1
Share
More Forum Discussions

What does MTC lane mean?

MTC lane refers to the existing manual toll collection system, which consists of an Automatic Vehicle Classification (AVC) system, card reader device, display equipment, video surveillance, automatic barrier, and computer software system. The card reader can be either contact-type or contactless. MTC is a relatively traditional highway toll collection system that can operate independently. When the toll station computer is not working or network issues occur, it does not affect normal operations. Operation parameters and data records are stored locally. When the lane operates independently for an extended period, toll data can be manually uploaded to the toll station using other storage media.
3
2
Share

What are the maintenance items for 100,000 kilometers?

100,000-kilometer car maintenance items generally include six aspects. The following is a detailed introduction: 100,000-kilometer maintenance items: Replace engine oil and oil filter, clean the air filter, check whether the generator belt and wiper blades are damaged; check whether the levels of various fluids are normal; check whether the tire pressure is normal, and whether there is uneven wear, bulging, or damage to the tires; inspect the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for scratches; check whether all switches and lights are working properly. Purpose of maintenance: Ensure the vehicle is in excellent performance condition; improve vehicle efficiency and reduce wear on parts and tires; enhance driving safety; avoid dangerous situations caused by vehicle problems; reduce noise and environmental pollution; maintain the vehicle's appearance and prevent damage.
3
3
Share

What does M11 gear mean?

M11 gear refers to a manual mode in an automatic transmission, allowing manual control of gear shifting. Below is a partial introduction about car gears: 1. Automatic transmission: An automatic transmission does not require manual gear shifting while driving, whereas a manual transmission car requires timely gear shifting to change vehicle speed and engine torque. Automatic transmission cars generally consume more fuel than their manual counterparts of the same model, approximately 1 liter more per 100 kilometers. In terms of vehicle cost, the automatic transmission is more expensive than the manual transmission in the same model. The advantage of an automatic transmission lies in its ease of driving. Additionally, automatic transmissions include continuously variable transmission (CVT), electronic paddle shifters, and electronic gear shift levers. There are three types of transmissions in the market: manual transmission, automatic transmission, and semi-automatic transmission. 2. Transmission gears: Common automatic transmission vehicles have gears such as P, R, N, D, 3, 2, and 1. P stands for Park, used when parking (when turning off the engine). R stands for Reverse. N stands for Neutral, similar to the neutral gear in a manual transmission, used for short stops. D stands for Drive, where the transmission automatically shifts between gears 1-5 based on speed and throttle conditions.
11
3
Share

How long can traffic violations captured by electronic eyes be processed without breaking the law?

Traffic violations captured by electronic eyes can be processed without breaking the law if handled at the traffic police station where the violation occurred within one month before the annual vehicle inspection. However, it is important to avoid exceeding the demerit point cycle of a driver's license to prevent accumulating 12 points in the next cycle due to untimely clearance. Electronic eyes, also known as electronic police, are commonly referred to as the Intelligent Traffic Violation Monitoring and Management System. They utilize various technologies such as vehicle detection, photoelectric imaging, automatic control, network communication, and computer systems to monitor violations like running red lights, driving in the wrong direction, speeding, crossing lines, and illegal parking around the clock. They capture images and information of traffic violations for subsequent processing based on the violation details.
7
1
Share

How early can vehicle annual inspection be done?

Vehicle annual inspection can be done 90 days in advance. According to Article 32 of the Motor Vehicle Registration Regulations, the owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. If a vehicle that has not undergone annual inspection continues to be driven on the road, it will be subject to a fine and a three-point penalty, and the vehicle will also be temporarily impounded. The time for vehicle annual inspection is not calculated based on specific dates, but rather by month. If the annual inspection is overdue, previously purchased vehicle insurance will not be valid. If a traffic accident occurs during this period, the insurance company will not provide compensation.
20
4
Share

Can you change lanes over a solid white line?

Solid white lines cannot be crossed for lane changes. They are used to separate lanes traveling in the same direction, indicating that vehicles must stay within their lane and not cross into another lane going the same direction. Changing lanes by crossing a solid white line is considered a traffic violation for crossing the line illegally and may result in penalties. If an accident occurs while changing lanes over a solid white line, the driver will bear primary responsibility. According to regulations, vehicles and pedestrians must follow traffic signals. When directed by a traffic officer on site, they must follow the officer's instructions. On roads without traffic signals, they should proceed under the principle of ensuring safety and smooth traffic flow. Another common type is the solid yellow line, which separates lanes traveling in opposite directions, usually painted in the middle of the road like a divider. Unless under special circumstances, drivers should not cross this line while driving.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.