What kind of engine oil makes the engine quieter?

1 Answers
SanLyla
07/30/25 10:12am
Engine oil that makes the engine quieter is fully synthetic oil. The related introduction is as follows: Reasons for using fully synthetic oil: Synthetic oil has a wider temperature range compared to semi-synthetic and mineral oils; synthetic oil is less prone to deterioration, has lower evaporation loss, and a longer service life than conventional oil; it has excellent chemical stability, good radiation resistance, high oil film strength, and less foam, providing good lubrication and reduced wear; fully synthetic oil has less thermal degradation, saves fuel, and better protects the engine. Method for changing engine oil: Use a jack to lift the vehicle, locate and loosen the drain plug to drain the oil; after removing the oil filter, place a container underneath; replace with a new oil filter and add new oil.
Was this review help?
13
3
Share
More Forum Discussions

What is the function of the camshaft?

The camshaft is a key component that drives valve movement. The function of the camshaft is to control the opening and closing actions of the valves. The working principle of the camshaft is as follows: The continuous rotation of the automobile camshaft pushes the valve tappets to move up and down, thereby controlling the opening and closing of the valves. By altering the camshaft's profile, the timing of valve opening and closing can be precisely adjusted. Symptoms of a damaged camshaft in a vehicle engine are as follows: The vehicle has a high-voltage spark, but the starting time is prolonged, and the vehicle can eventually start; during the starting process, the engine crankshaft may reverse, and the intake manifold may experience backfiring; the vehicle idles roughly with severe shaking, similar to a misfiring cylinder fault; the vehicle lacks acceleration and cannot pick up speed, with the RPM exceeding 2500; the vehicle exhibits high fuel consumption, exceeds exhaust emission standards, and the exhaust pipe emits black smoke. Location of the camshaft: The camshaft can be located in three positions: lower-mounted, mid-mounted, and overhead. In a lower-mounted valve train, the camshaft is located in the crankcase; in a mid-mounted valve train, the camshaft is located in the upper part of the engine block; in an overhead valve train, the camshaft is located on the cylinder head. Most mass-produced vehicles today are equipped with overhead camshafts.
5
0
Share

Where to Turn On Bluetooth in an Audi Car?

Press the one-touch start button, then select the Tel button option inside the vehicle and switch the connection manager to turn it on. Below is relevant information about car Bluetooth: 1. Purpose: Bluetooth/hands-free car kits are designed specifically for driving safety and comfort. Passengers only need a Bluetooth-enabled mobile phone to connect with the car's Bluetooth system, enabling them to make and receive calls through it. 2. Features: Automatically identifies mobile phones, allowing connection without cables or phone holders; users can control the phone without touching it (keeping both hands on the steering wheel) by using voice commands to answer or make calls. Users can conduct calls through the car's audio system or Bluetooth wireless headsets.
15
2
Share

Can cars be registered on Saturdays and Sundays?

Vehicle management offices do not handle license plate registrations on Saturdays and Sundays. Working hours: The operating hours of vehicle management offices are from 8:30 AM to 11:30 AM and from 1:30 PM to 5:00 PM, Monday through Friday, excluding statutory holidays. Therefore, it is not possible to register vehicles on Saturdays and Sundays. Rest periods: Vehicle management offices operate from Monday to Friday, excluding statutory holidays, and are closed on weekends. They observe a two-day weekend rest period. When registering a vehicle from Monday to Friday, you must first pay for insurance, including compulsory traffic insurance, as registration can only proceed after the insurance takes effect. You must also visit an inspection station for an initial inspection, bringing along the compulsory traffic insurance, ID card, vehicle certification, and a copy of the purchase invoice.
15
2
Share

Can a modified exhaust pipe on an Audi A3 pass vehicle inspection?

Modifying the exhaust pipe can pass the annual inspection as long as it does not alter the vehicle's color, engine, or body. Below is relevant information about the annual inspection: 1. Purpose of the inspection: The annual inspection determines the technical condition and operational capability of the vehicle, identifying fault locations and causes. Only by passing the inspection can the vehicle continue to operate or undergo maintenance. 2. Key considerations for the inspection: Do not modify the vehicle's appearance or tire size. The physical condition of the car must match the photo on the driving license. Changes in the vehicle's appearance may result in failing the inspection. As the vehicle ages, some owners may replace tires according to personal preference. However, it is essential to maintain the original tire size and model; otherwise, the vehicle may not pass the inspection.
14
3
Share

What Causes the Noise from the Right Front Shock Absorber on Bumpy Roads?

The noise from the right front shock absorber on bumpy roads is caused by the shock absorber's top bearing or the stabilizer bar. Noise from the shock absorber's top bearing: If a clicking sound is heard when lightly shaking the steering wheel while stationary, it is likely due to insufficient lubrication in the shock absorber's top bearing. To confirm, open the hood and listen for the sound coming from the shock absorber's top mount. If the noise is indeed from the top bearing, applying grease may help. If the noise persists after greasing, replacement is necessary. Noise from the stabilizer bar: If the noise is not from the shock absorber, check if the stabilizer bar bushings are loose or damaged. Damaged bushings can cause noise both when turning the steering wheel and when driving on uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced.
19
3
Share

Why Can't the Audi Car Key Be Pulled Out?

The reason why the Audi car key cannot be pulled out after turning off the engine is that the gear is not fully returned to the P position. Although it may appear to be in place, it has not actually touched the electronic sensor, or there may be obstacles such as coins in the gear slot preventing it from returning to position. Below is an introduction to the P gear: 1. Principle: Mechanically locks the output shaft of the transmission to secure the car and prevent movement. 2. Parking sequence: After the car comes to a complete stop on a level surface, shift the gear from D to P, engage the parking brake to complete parking, and then turn off the engine.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.