What kind of engine oil is used for the BMW 7 Series?

1 Answers
MaxDella
07/29/25 8:46am
BMW 7 Series can use 0W40 engine oil. When adding engine oil, it is best to consult the vehicle's user manual in advance or go directly to a 4S store to have professional staff assist with the addition to prevent mixing different oils, which may affect the normal operation of the engine. It should be noted that the type of engine oil added may vary depending on the vehicle's usage conditions. The BMW 7 Series has a body length, width, and height of 5273mm, 1902mm, and 1498mm respectively, with a wheelbase of 3210mm. In terms of power, the BMW 7 Series offers a choice of 2.0-liter turbocharged, 3.0-liter turbocharged, 4.4-liter twin-turbocharged, and 6.6-liter twin-turbocharged engines.
Was this review help?
2
0
Share
More Forum Discussions

How to Remove the Wiper?

Here is the tutorial for replacing and removing the wiper: 1. First, lift the wiper arm of the car to a 90-degree angle. 2. Then, hold the fixed wiper arm with one hand, and use the other hand to gently apply some force to remove it. 3. When installing, first align the wiper groove with the plastic part inside the swing arm. Then, use both hands to press firmly on the wiper groove area until you hear a "click" sound. It's best to move the wiper left and right to ensure it is securely fixed. Note: When removing the wiper, make sure to turn it to a certain angle (about 30 degrees), otherwise it will be difficult to take off. Also, after pressing the buckle, wait until you hear the "click" sound before removing the wiper. Be sure to control the force when removing to avoid damaging the wiper arm.
2
1
Share

What is the engine model of the Baojun 630?

The engine model of the Baojun 630 is the L2B, with a maximum power output of 81kW and a maximum torque of 146Nm. The Baojun 630 offers a total of 4 models, all equipped with a 1.5L naturally aspirated engine, paired with either a 5-speed manual or 6-speed automatic transmission. The Baojun 630 is positioned as a compact sedan, with body dimensions of 4597mm in length, 1763mm in width, and 1462mm in height, and a wheelbase of 2640mm. The six key features of the Baojun 630 include all-time dynamic appearance, global quality standards, universal safety design, versatile power handling, comprehensive space utilization, and full-range economic and environmental friendliness.
16
3
Share

What are the reasons why the new Jetta cannot be turned off?

The reasons why the new Jetta cannot be turned off: In most cases, the vehicle's inability to shut down normally is caused by a malfunctioning ignition switch, water ingress in the wiring harness connector, abnormal control system, or modifications. The specific reason requires an on-site inspection for a better judgment. Below are other reasons why a car cannot be turned off: Different models have different operations: Some models require a long press to turn off. Some models need to be pressed twice to turn off—once to stop the engine and another to cut off all power. Other models can be turned off with just a single press. Key not detected: Sometimes, the nearby magnetic field is quite strong, causing interference and preventing the key from being detected. Solution: Align the key with the one-button start. Battery issues: Either the battery is dead, or the battery voltage is below 12V. In this case, a long press can turn off the vehicle.
14
2
Share

Are Hazard Warning Lights and Double Flashing Lights the Same?

Hazard warning lights and double flashing lights are the same; they are signal lights used to alert other vehicles and pedestrians to special situations involving the vehicle. Situations where double flashing lights should be turned on include: 1. When the vehicle has a malfunction; 2. When encountering a breakdown on the highway; 3. When towing a malfunctioning motor vehicle; 4. When an emergency malfunction occurs while driving; 5. When temporarily parked on the road; 6. When the vehicle is involved in a traffic accident. Composition of vehicle lights: 1. Position lights: To signal the presence of the vehicle to oncoming and following traffic; 2. Turn signals: To indicate turning movements to other vehicles and pedestrians; 3. Headlights: Comprising low beams and high beams, used for illumination; 4. Fog lights: Used in foggy conditions as a light signal; 5. Reverse lights: To alert pedestrians and vehicles behind when reversing; 6. Brake lights: To warn following vehicles.
12
1
Share

Where is the Civic headlight sensor located?

The automatic headlight sensor of the Civic is positioned in the middle between the two air vents below the front windshield. About car automatic headlights: Automatic headlights are a light-sensitive control system installed by manufacturers for user convenience. When driving in dimming conditions, the headlights automatically turn on, and they switch off when light increases. Drivers simply need to set the light switch to AUTO mode, and the vehicle will automatically activate high/low beams or turn off lights as needed, which is particularly convenient when entering/exiting tunnels or garages. Correct usage of lighting: Turning the left light control switch forward one notch activates parking lights, two notches activate low beams. Pushing the light control lever forward once activates high beams. Lifting the lever upward once activates the right turn signal. During night driving, use low beams. When following another vehicle at close range, high beams should not be used.
18
3
Share

How many years can a car be driven before it can be scrapped?

A car can be scrapped after 15 years, but it must be forcibly scrapped once it has been driven for 600,000 kilometers. The consequences of not scrapping a car on time include: 1. Affecting the renewal or annual inspection of the driver's license; 2. Driving a car that has not undergone inspection may result in fines and revocation of the driver's license; 3. The car will be forcibly scrapped, and the owner will bear the cost. The process of scrapping a car is as follows: 1. The owner fills out an application form; 2. The application is registered and reviewed, and a scrapping notice is issued. For vehicles that have not reached the scrapping age, a notice will be issued after inspection if they meet the scrapping standards; 3. The owner takes the scrapping notice to a qualified recycling company to deliver the vehicle; 4. The company dismantles the car and takes photos after inspection; 5. The owner checks and signs the form, and the license plates are reclaimed, after which the scrapping registration is processed according to regulations.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.