···
Log in / Register

What kind of engine oil is used for Mercedes-Benz E?

3 Answers
DelCarter
09/05/25 2:13am
Mercedes-Benz E uses Mobil 1 (0W-40) engine oil. Lift the car: Run the engine until it reaches operating temperature. Then use a jack to lift the vehicle, engage the handbrake, and secure the front wheels with wooden wedges. Loosen the drain plug and wait: Loosen the drain plug, use an air gun to blow into the oil filler port for two minutes. After draining, tighten the drain plug and wipe it with a tissue to check for leaks. Reinstall the cover and add new oil: Reinstall the car's underbody cover and lower the car. Add new oil through the oil filler port. Also, apply new oil to the gasket of the new oil filter.
Was this review help?
16
5
Share
StReed
09/17/25 2:56am
As a frequent visitor to auto repair shops, I deeply understand the importance of oil selection for the Mercedes-Benz E-Class. According to the official manual, the E-Class requires fully synthetic oil that meets Mercedes-Benz certification standards, such as MB 229.51 or 229.52 in 5W-30 or 0W-40 grades. I strictly adhere to this during every maintenance session because it protects the precision engine from wear and high temperatures. Using conventional oil can easily lead to sluggish acceleration, increased fuel consumption, and even engine failures, especially during cold starts in winter. I also recommend regularly checking the oil level and changing it every 10,000 kilometers to ensure the lubrication system remains healthy. At repair shops, many owners overlook this, directly leading to soaring costs, so always refer to the vehicle's VIN to confirm specific requirements. Don't skimp on this expense—safety should always come first.
Was this review help?
19
3
Share
Expand All
McCali
10/31/25 3:26am
I've been driving a Mercedes-Benz E-Class for several years, and personal experience has taught me that choosing the right engine oil is crucial. The manual clearly specifies the use of Mercedes-certified full synthetic oil, such as 5W-30 or 0W-40, and I always have the technician use the manufacturer-recommended oil. Using other types of oil, like cheaper synthetic oils, can lead to noticeably louder engine noise, sluggish acceleration, and even affect long-term engine life. During daily use, I regularly check the oil level to avoid depletion, especially since protection is even more critical during the high temperatures of summer. If unsure, you can always consult a 4S dealership or use an app to check the matching oil specifications. Although maintenance costs might be a bit higher, it avoids repair hassles and ensures smooth, worry-free driving.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

How many spark plugs does the new Sagitar have?

Volkswagen Sagitar has 4 spark plugs. Spark plug ignition: The spark plug is an important component of the gasoline engine ignition system. It introduces high voltage electricity into the combustion chamber and causes it to jump across the electrode gap to generate a spark, thereby igniting the combustible mixture in the cylinder. Spark plug replacement: Unplug the ignition coil wiring harness connector and remove the ignition coil mounting bolts; inspect the spark plugs (check if the terminal is damaged, check if the insulator is broken down, check if the electrodes are worn, etc.); select appropriate tools, assemble the tools, remove the spark plugs, and take out the spark plugs one by one; cover the spark plug holes on the cylinder with a clean cloth to prevent objects from entering the cylinder block.
2
4
Share

What is the valve clearance for Subaru?

Subaru Forester's valve clearance is approximately 0.2mm. Valve expansion: When the engine is running, the valves will expand due to temperature increase. If there is no gap or too small a gap between the valve and its transmission components in the cold state, the thermal expansion of the valve and its transmission components in the hot state will inevitably cause the valve to close improperly, resulting in air leakage during the compression and power strokes of the engine, thereby reducing power. In severe cases, it may even be difficult to start. Eliminating valve clearance: To eliminate this phenomenon, a certain gap is usually left between the valve and its transmission mechanism during cold assembly of the engine to compensate for the expansion of the valve after heating. This gap is called valve clearance.
3
3
Share

What are the symptoms of a faulty ECU in a Haval H3?

If there is an issue with the vehicle's ECU, the malfunction indicator light will illuminate. Persistent Malfunction Light: The engine malfunction light stays on continuously. If other engine hardware checks out fine but the light remains on, it may indicate a faulty ECU. Difficulty Starting the Vehicle: During startup, the ECU is responsible for increasing the fuel injection volume. If the ECU is damaged, the concentration of the combustible air-fuel mixture may be too low, making it difficult to start the vehicle. Internal Program Disruption: Fuel injection volume, ignition timing, transmission shift logic, and other functions may be affected. If the vehicle experiences poor performance or fails to start, it's advisable to check the ECU for potential damage.
1
5
Share

What Causes One Side of the Jaguar Brake Light Not to Work?

One side of the Jaguar brake light not working is due to a burnt-out bulb or a blown brake light fuse. Below are the specific reasons why the brake light may stay on: Damaged Brake Switch: This is usually caused by poor contact between the brake pedal and the brake sensor switch or a faulty sensor switch. Worn or Aged Brake Pads: Worn or aged brake pads can also cause the brake light to stay on. It is necessary to check the thickness of the brake pads. If the thickness is below the specified value, typically 0.8cm, there is a high risk of the pads cracking while driving, which can be dangerous. Low Brake Fluid: Low brake fluid is often accompanied by noticeably reduced braking power, and in severe cases, a complete loss of braking force. This issue can be resolved by promptly refilling the brake fluid. Insufficient brake fluid causes the brake pedal to sink, keeping the brake switch continuously powered, which results in the brake light staying on.
2
5
Share

What is the original headlight bulb for the 2016 Emgrand GS?

Geely Emgrand GS uses HB3 dual-function bulbs for its high and low beams, with a power rating of 60W. Automotive headlights: Also known as car headlamps or LED daytime running lights, they serve as the "eyes" of a vehicle. They not only affect the owner's external image but are also crucial for safe driving at night or in adverse weather conditions. Halogen headlights: Among automotive headlights, laser headlights are the brightest, followed by xenon and LED lights, with halogen being the dimmest. A 55W halogen bulb produces about 1000 lumens, and despite being a mature technology, there's little room for improvement in brightness. A typical 35W xenon lamp produces around 3500 lumens, approximately 100 lumens per watt. A standard 35W LED light produces about 3200 lumens, roughly 91 lumens per watt. Laser headlights, with 170 lumens per watt, are the brightest car lights available. The above figures represent general industry standards.
8
0
Share

What is the suitable tire pressure for Audi A6 in summer?

Audi A6's summer tire pressure is more suitable at 2.2bar. For roads with large bumps: On roads with large bumps, it is appropriate to reduce the tire pressure by 0.1-0.2bar from the standard tire pressure. For long-distance high-speed driving, the tire pressure should not be too low. It is advisable to increase the tire pressure by about 0.2bar from the lower limit of the standard tire pressure. New and old tires: For new tires, the pressure can be increased by about 0.2bar from the standard tire pressure. For old tires, it is appropriate to reduce the tire pressure according to the standard. If the wear is severe, follow the lower limit of the standard tire pressure. Summer and winter: In winter, the tire pressure can be increased by about 0.2bar based on the standard tire pressure. In summer, follow the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.