What kind of engine oil is suitable for the Vezel 1.8?

What to Do When the Car Won't Start After Stalling?

Methods to handle a car that won't start after stalling include: 1. Straighten the steering wheel and then start the engine; 2. Clean carbon deposits from the throttle body, fuel injectors, and intake tract; 3. Inspect the ignition system and fuel supply system; 4. Regularly replace wear-prone components. The procedure to start a car is: 1. Insert the key and turn on the ignition switch; 2. Press the clutch pedal and shift the gear lever into first gear; 3. Release the handbrake and lift the clutch pedal while pressing the accelerator. Reasons why a car won't start after stalling are: 1. Insufficient battery charge; 2. Battery voltage too low; 3. Battery malfunction; 4. Fuel supply system failure; 5. Ignition system failure; 6. Incorrect gear position; 7. Steering wheel lock engaged.

19

5

Share

What is the normal pressure of automotive air conditioning refrigerant?

The pressure of automotive air conditioning refrigerant varies under different conditions: 1. When the compressor is running at 1500 to 2000 rpm, the high pressure is approximately 1.5 to 2.0 MPa, and the low pressure is around 0.15 to 0.35 MPa. 2. In idle conditions, if the ambient temperature is high and under direct sunlight, the high pressure may be slightly higher, reaching about 2.5 to 2.8 MPa, but it generally does not exceed 3.1 MPa. Under normal circumstances, cars do not need to add refrigerant for 3 to 5 years. However, sometimes if the cooling effect of the refrigerant is poor, it may need to be replenished. After the air conditioner has been running normally for a while, if the air blowing on you feels cool and quickly reaches the set temperature, and the outdoor compressor operates intermittently like a refrigerator, it indicates normal functioning. Otherwise, it might be necessary to add refrigerant.

6

3

Share

What are the dangers of refueling without turning off the engine?

The hazards of refueling without turning off the engine: 1. When opening the fuel tank cap, fuel may spray out, creating a safety hazard; 2. The engine continues to run with current flowing, which can lead to short circuits or leakage, posing a significant fire risk; 3. The surrounding area of the car generates considerable heat. During refueling, the concentration of fuel vapor mixed with air around the tank increases. If a spark occurs while the vehicle is running, the gasoline molecules in the air can easily ignite, leading to danger. Precautions for refueling: 1. Do not use mobile phones; 2. No smoking; 3. Turn off the engine and power supply before refueling.

8

3

Share

What is the method for resetting the tire pressure on the 2019 Magotan?

The method for resetting the tire pressure on the 2019 Magotan: In the menu, select settings, enter the iDrive interface, click on vehicle settings, choose tire pressure initialization, and then confirm. Additionally, there is a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, press and hold this switch button until you hear a beep, indicating the tire pressure reset is complete. The 2019 Magotan has body dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm. The 2019 Magotan is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.

18

4

Share

How to Tell if a Tire is a Tubeless Tire?

Methods to identify a tubeless tire: 1. Tubeless tires bear a unique marking, the TUBELESS logo. If present, it's a tubeless tire; otherwise, it's not. 2. If the wheel rim is of the spoke type, it's not a tubeless tire. 3. Tubeless tires have raised sections on their rubber; absence of these indicates it's not tubeless. Precautions for using tubeless tires: 1. Maintain the specified air pressure. Tubeless tires are made of high-quality rubber with good elasticity and flexibility, accommodating a wide range of pressures. Even at high pressure, they don't feel as hard as conventional tires, so always use a pressure gauge for checks. 2. Not suitable for overloading. Tubeless tires are wear-resistant but not pressure-resistant; they're unsuitable for excessive overloading.

2

5

Share

Why does the Focus have power but fail to start?

Reasons why the Focus has power but fails to start: The car's fuel filter is clogged. Here are the solutions: 1. Promptly visit a Ford Focus 4S store or a professional repair shop to clean the car's fuel filter, which can resolve the issue of the engine failing to start. 2. The fuel filter is used to filter impurities and a small amount of moisture in the fuel, so the quality of the fuel greatly affects the lifespan of the fuel filter. However, even if the fuel quality is good, the fuel filter will gradually become clogged over time. The symptoms of clogging are basically typical fuel line blockage issues.

9

4

Share

What kind of engine oil is suitable for the Vezel 1.8?

What to Do When the Car Won't Start After Stalling?

What is the normal pressure of automotive air conditioning refrigerant?

What are the dangers of refueling without turning off the engine?

What is the method for resetting the tire pressure on the 2019 Magotan?

How to Tell if a Tire is a Tubeless Tire?

Why does the Focus have power but fail to start?

What is the fuel tank capacity of the new Sylphy?

How to Remove Asphalt from Car Paint?

How to Use the Cruise Control in the Avancier?

What is the difference between 91v and 91h?