What kind of engine oil is suitable for the Teana?

1 Answers
SaraDella
07/29/25 2:36pm
You can choose semi-synthetic engine oil, but it is best to use fully synthetic engine oil, whether it is joint venture or domestic fully synthetic engine oil. The following are the precautions for selecting engine oil: 1. You must use engine oil with the appropriate quality grade, which is the key to ensuring the normal operation of the engine. 2. If the oil supply is not timely or there is no suitable oil, substitute oil can be used, but during use, you must strengthen observation, pay attention to the oil quality and whether the oil filter is blocked, and deal with any problems in time. 3. Choose oil with appropriate viscosity. Choose oil with suitable viscosity according to the local temperature. The idea that the higher the viscosity, the better is wrong, because if the viscosity is too high, the oil flow will be too slow when starting, which can easily aggravate the wear of parts and even cause bearing burning accidents. 4. When changing the oil, the waste oil must be completely drained. 5. The gas that enters the crankcase from the combustion chamber is corrosive, which can oxidize and deteriorate the engine oil and pollute the engine, so the crankcase must be well ventilated. 6. Maintain normal oil level height. 7. Regularly check and maintain the oil filter, and replace the filter element in time. 8. Any quality of engine oil will undergo some physicochemical changes after being used for a certain mileage, which will bring harm to the engine and cause failures. Therefore, the oil should be changed regularly according to the quality based on the changes in the engine oil.
Was this review help?
4
2
Share
More Forum Discussions

What type of oil does Nissan recommend for the HR16 engine?

Nissan recommends using 5W-30 oil for the HR16 engine. Below is relevant information about the Nissan HR16DE engine: 1. Features: Due to the adoption of CVTC (Continuously Variable Valve Timing Control) technology, the power curve is relatively smooth, while the torque curve reaches its peak of 153N·m/rpm at 4400 rpm, with minor peaks appearing at 2500 rpm and 3500 rpm respectively. 2. Definition: The HR16DE engine is a new high-performance inline-four-cylinder engine developed by Nissan as the successor to the QG engine, aimed at enhancing competitiveness from 2004 onwards. The newly developed all-aluminum engine achieves a harmonious balance of driving performance, fuel economy, and environmental friendliness. The development goals of the HR16DE include reducing friction, improving thermal efficiency, and increasing power output through technological innovations in its components; optimizing design to minimize space occupancy and overall weight, making it top-tier among 1600cc engines; and achieving top-level torque, fuel consumption, and noise and vibration reduction at medium to low speeds within its class.
9
0
Share

What to Do If the Skoda Octavia Trunk Won't Open?

Skoda Octavia trunk won't open is due to linkage rod or lock core issues. It needs to be repaired at a repair shop or 4S store. Below are specific details about the Skoda Octavia: 1. Body dimensions: The Octavia is a compact car under Skoda, with a length, width, and height of 4675 mm, 1814 mm, and 1460 mm respectively, and a wheelbase of 2686 mm. 2. Power configuration: The Octavia uses three engines in total, which are a 1.5-liter naturally aspirated engine, a 1.2-liter turbocharged engine, and a 1.4-liter turbocharged engine. The 1.5-liter naturally aspirated engine is paired with a 5-speed manual transmission or a 6-speed automatic manual transmission; the two turbocharged engines are matched with a 7-speed dual-clutch transmission. The Octavia's front suspension uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension.
10
1
Share

What is the horsepower of the Quanchai 480 engine?

The 480 engine has over 50 horsepower. Below is relevant information about horsepower: 1. Introduction to horsepower: Horsepower is a commonly used unit for measuring power in engineering technology, proposed by James Watt. 1 horsepower is approximately equal to 735 watts. It generally refers to metric horsepower rather than imperial horsepower. 1 horsepower equals the work of completing 75 kilogram-force meters in 1 second, also equal to 0.735 kilowatts, or metric horsepower. 1 imperial horsepower equals 550 foot-pounds per second, equal to 76 kilogram-force meters per second, or 0.746 kilowatts. 2. Metric horsepower: Metric horsepower, also known as metric horsepower, is entirely man-made and set to a value very close to imperial horsepower. It is defined that 1 metric horsepower is the work of completing 75 kilogram-force meters in 1 second. That is: 1 metric horsepower = 75 kilogram-force meters/second = 735 watts.
14
1
Share

How Many Years Are New Cars Exempt from Inspection in Shanghai?

New cars are exempt from inspection for 6 years. Below are the relevant details: 1. Exemption conditions: The motor vehicle must be a non-commercial vehicle; the approved seating capacity is 6 or fewer. Starting from November 20, 2020, non-commercial mini and small passenger vehicles with 7 to 9 seats are included in the exemption scope. Vehicle types specified on the driving license: sedan (mini, small, medium, large), mini ordinary passenger vehicle, mini off-road passenger vehicle, small ordinary passenger vehicle, small off-road passenger vehicle, small special passenger vehicle. 2. Relevant regulations on motor vehicle annual inspection: Commercial passenger vehicles must be inspected once a year within 5 years; after 5 years, once every 6 months; trucks and large and medium non-commercial passenger vehicles must be inspected once a year within 10 years; after 10 years, once every 6 months.
3
5
Share

Can 98 and 95 be mixed?

95 gasoline and 98 gasoline can occasionally be mixed, but it is not recommended to mix them for a long time. The following is a specific introduction about gasoline: Long-term mixing of gasoline can cause engine knocking. Gasoline is a mixture. The gasoline grade we usually come into contact with refers to the anti-knock index of gasoline (i.e., the octane number). Strictly speaking, 95 gasoline and 98 gasoline cannot be mixed. However, their chemical composition and other aspects are relatively similar, with strong anti-knock performance. To ensure vehicle safety, they should still be used separately. In some areas, there is also low-grade 90 gasoline. If it is mixed with high-grade gasoline, it will cause knocking, insufficient power, and other phenomena, affect the service life of spark plugs, and bring more exhaust pollution. The density of 98 gasoline is generally above 0.74. 98 gasoline is gasoline whose octane number is equal to a mixture of 98% isooctane and 2% n-heptane. The advantage of 98 gasoline is "two highs and two lows", that is, higher anti-knock performance and power performance, and lower harmful substances and exhaust pollution in gasoline. 95 gasoline has strong anti-knock performance and will not be compressed and ignited under high pressure, ensuring that the engine is at the optimal ignition advance angle, and the power output is not affected. The gasoline grade also represents the anti-knock performance of the fuel. The larger the grade, the better the anti-knock performance. Anti-knock performance refers to the ability of gasoline to resist knocking when burning in the engine. It is the primary indicator of gasoline combustion performance. Knocking is caused by abnormal combustion of gasoline in the engine. The octane number is the target of gasoline anti-knock performance. The higher the octane number, the stronger the anti-knock performance, and the higher the compression ratio, the higher the pressure in the combustion chamber. If gasoline with low anti-knock performance is used, knocking is more likely to occur.
13
1
Share

How many points are deducted for occupying the emergency lane on urban expressways?

Occupying the emergency lane on urban expressways results in a deduction of 6 points. Below is a detailed introduction regarding the occupation of emergency lanes: 1. Highway lanes: For non-commercial vehicles parked in highway lanes, a one-time deduction of 6 points is applied. 2. Highways or urban expressways: Driving a motor vehicle and illegally occupying the emergency lane on highways or urban expressways results in a one-time deduction of 6 points. 3. Lane borrowing during slow traffic: When encountering slow or stationary traffic ahead, borrowing a lane to overtake or occupying the opposite lane or cutting into waiting traffic results in a one-time deduction of 2 points. Additionally, illegal parking of commercial passenger vehicles in the emergency lane results in a deduction of 12 points.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.