What kind of engine oil is suitable for Changan Blue Core engine?

Why is there no response when turning the key to ignition?

No response when turning the key to ignition may be due to electronic or fuel system failures. Below are detailed explanations of the causes and solutions: Electronic failure: The occurrence is usually very sudden without any warning signs. Possible circuit failures include: blown fuse, open circuit in high-voltage coil, open circuit in low-voltage circuit, detached central ignition wire, distributor rotor leakage, or damaged spark plugs. Electronic failure mainly refers to the malfunction of the central computer control board. Solution: Inspect the central computer control board, identify the issue, and replace it if necessary. Fuel system failure: Engine stalling caused by fuel system issues often comes with symptoms like weak engine power or a spongy accelerator pedal. Possible fuel system problems include: fuel pump failure, blocked fuel lines, clogged fuel filter, carburetor malfunction, or damaged injectors. Sometimes, the fuel tank might be empty without the owner's awareness. Solution: Check the fuel system for issues and promptly perform cleaning or repairs.

17

5

Share

Why does the car turn signal intermittently fail?

Intermittent failure of the car turn signal is usually caused by a faulty flasher relay or turn signal switch. Below are the specific causes and solutions: Flasher relay failure: If the flasher fails, it will cause both the left and right turn signals of the vehicle to not work. Solution: In this case, the general solution is to replace the flasher. Turn signal switch failure: If the turn signal switch of the vehicle fails, it will cause either the left or right turn signal to not work. Solution: For this situation, it is generally recommended to go to a repair shop for maintenance and replace the faulty turn signal switch.

11

4

Share

What are the characteristics of an electronic driver's license?

Electronic driver's licenses feature uniformity, real-time functionality, and security. Below is an introduction to electronic driver's licenses: Electronic driver's licenses have uniformity: Issued through the "Traffic Management 12123" APP, electronic driver's licenses have a unified format nationwide. Electronic driver's licenses hold the same legal validity as paper driver's licenses. Electronic driver's licenses have real-time functionality: Generated through the National Public Security Traffic Management Electronic Certificate System, electronic driver's licenses dynamically display changes in permitted vehicle types and traffic violation points, facilitating real-time inquiries, presentations, and verifications. Electronic driver's licenses have security: Verified and compared through the National Public Security Traffic Management Electronic Certificate Resource Database, electronic driver's licenses employ digital signature anti-counterfeiting technology, effectively preventing tampering and forgery, ensuring the authenticity, uniqueness, and reliability of electronic driver's licenses.

10

3

Share

How many hours can a driver drive continuously?

Drivers are not allowed to drive continuously for more than four hours. Legal basis: According to Article 62 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China", the following behaviors are prohibited while driving a motor vehicle: driving when the doors or compartments are not properly closed; hanging or placing items that obstruct the driver's view within the front or rear windows of the motor vehicle's cab; making or answering handheld phone calls, watching TV, or engaging in other activities that hinder safe driving; stalling or coasting in neutral on steep slopes; throwing items onto the road; driving a motorcycle with hands off the handlebars or hanging items on the handlebars; driving continuously for more than 4 hours without stopping to rest or stopping for less than 20 minutes; honking the horn in no-honking zones or sections. Problems that may arise from prolonged driving: Engine overheating is extremely dangerous and may, in unfortunate cases, lead to engine damage. Another issue to be aware of during long drives is brake fade. Brake fade refers to the phenomenon where the braking system loses effectiveness due to high temperatures generated by intense friction between the brake discs and brake pads.

8

3

Share

What does the yellow triangle with an exclamation mark in BMW mean?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark indicators: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow horizontal line with parentheses and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating brake system failure or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: A horizontal line with parentheses and an exclamation mark in the middle represents the tire pressure monitoring warning light. This light turns on when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.

20

4

Share

Why Won't the Car Start When Cold?

Difficulty starting a cold engine may be caused by issues in the intake system or fuel delivery system. Below are detailed explanations of potential causes and corresponding solutions: Intake System Issues: As temperatures drop, fuel injected into the intake manifold may not atomize properly. If carbon deposits exist in the engine's intake system, they can absorb portions of the fuel-air mixture, making it harder to ignite in the combustion chambers. Solution: Consider cleaning the engine's intake passages and throttle body. Fuel Delivery System Issues: Difficulty building fuel pressure in the supply lines often occurs during extremely cold mornings. This is typically caused by contamination in fuel lines or injectors, where low temperatures allow water and fuel contaminants to mix, obstructing fuel flow and resulting in hard starting or failure to start. Solution: Perform a complete fuel system cleaning to thoroughly resolve ignition problems.

3

2

Share

What kind of engine oil is suitable for Changan Blue Core engine?

Why is there no response when turning the key to ignition?

Why does the car turn signal intermittently fail?

What are the characteristics of an electronic driver's license?

How many hours can a driver drive continuously?

What does the yellow triangle with an exclamation mark in BMW mean?

Why Won't the Car Start When Cold?

How many seats does the Honda Haoying have?

What does an electronic driver's license look like?

What is the difference between 98 octane and 95 octane gasoline?

What Causes the Engine to Make a Thumping Sound?