···
Log in / Register

What kind of engine oil is generally used for Geely Vision?

4 Answers
JustinDella
09/02/25 7:09am

Geely Vision uses engine oil with API quality grade: SL grade or above, SAE5W-30 (SAE10W-40 and above for tropical regions). More information about automotive engine oil is as follows: 1. Currently, engine oils on the market can be simply divided into two types based on their base oils: mineral oils and synthetic oils (vegetable oils are not considered due to their scarcity). Synthetic oils are further divided into: full synthetic and semi-synthetic. 2. The main differences between them are: synthetic oils can be used in a wider temperature range, have a longer service life, and are more expensive; for the same oil film requirements, synthetic oils can achieve the goal with lower viscosity, while mineral oils require higher viscosity compared to synthetic oils to meet the same requirements. In the same working environment, synthetic oils have a much longer service life than mineral oils, so they are more expensive, but after comparing the number of oil changes, they are not much more expensive than mineral oils.

Was this review help?
16
5
Share
DelMaddox
09/15/25 2:22am

I've been driving a Geely Vision for several years. Regarding engine oil, it's generally recommended to use 5W-30 fully synthetic or semi-synthetic oil with an API rating of SN or higher. The manual emphasizes that this type of oil is suitable for the Vision's engine, protecting components under various temperatures and reducing wear during cold starts. In terms of viscosity, 5W indicates good low-temperature fluidity, making it ideal for cold regions; for warmer southern climates, 10W-30 is also acceptable. I've used several brands like Great Wall or Mobil's fully synthetic oils, which offer strong durability and can extend oil change intervals to 8,000-10,000 kilometers. Regularly checking the oil level is crucial—don't wait until it's dirty to change it, as this can lead to increased engine noise and potentially affect fuel consumption. Overall, using this type of oil is the most worry-free option, protecting the car without breaking the bank. It's always safer to consult a professional mechanic during maintenance for advice.

Was this review help?
15
0
Share
Expand All
LeBentley
10/29/25 3:01am

As a frequent long-distance driver, I find that using 5W-30 engine oil for the Geely Vision works perfectly – it's affordable and performs well. Semi-synthetic oil is also a good choice, being cost-effective with each oil change costing around 200 yuan. The key is not to use the wrong oil grade, as it may cause engine overheating or increased fuel consumption. I always make sure to use API SN grade or higher oil, which has fewer impurities and better protects engine bearings. During hot summer months, oil with too low viscosity may become too thin, leading to wear, so checking oil pressure is crucial. Driving habits also influence oil selection: full synthetic oil is more wear-resistant for frequent highway driving, while regular oil suffices for city traffic with frequent stops. The recommended oil change interval is every 5,000 to 7,000 kilometers, and it's a good opportunity to check if the oil filter is clean, which can save significant repair costs. Remember this simple principle for smoother and safer driving.

Was this review help?
10
3
Share
Expand All
McJoy
12/12/25 3:13am

I've driven the Vision under various road conditions and found that using 5W-30 or 10W-30 engine oil works best, depending on the regional climate. In cold northern areas, 5W-30 provides better protection, while 10W-30 is sufficient in the south. The API grade should be no lower than SN to ensure clean oil and reduce carbon deposits. Synthetic oil offers significant advantages, extending engine life, but it's slightly more expensive. If on a tight budget, mineral oil can be used. Oil change frequency varies by individual; aggressive driving shortens the interval. Choose reputable brands like Shell or KunLun, and always check the oil level after topping up—both too low and too high can harm the engine. In short, matching the oil to your vehicle is most important.

Was this review help?
3
2
Share
Expand All
More Forum Discussions

Which Generation is the 2021 Camry?

The 2021 Camry is the eighth-generation model. The design of the eighth-generation Camry is notably more youthful and stylish. Here are the relevant details: 1. Vehicle Condition: The eighth-generation Camry is equipped with two types of engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. There is also a hybrid version of the eighth-generation Camry, which uses a 2.5-liter naturally aspirated engine as well. 2. Vehicle Configuration: This engine features hybrid injection technology and is paired with a CVT transmission. The 2.5-liter naturally aspirated engine delivers a maximum power of 154 kW and a maximum torque of 250 Nm. The engine reaches its maximum power at 6,600 rpm and its maximum torque at 5,000 rpm.
13
2
Share

Is the Geely Vision X6 fuel consumption high?

Geely Vision X6 has moderate fuel consumption. The manual transmission model has a fuel consumption of 7.0 liters per 100 kilometers, while the automatic transmission model consumes 8.2 liters per 100 kilometers. Basic introduction to the Geely Vision X6: 1. Model introduction: The Geely Vision X6 is a compact SUV under the Geely brand, with a wheelbase of 2661 mm, and dimensions of 4546 mm in length, 1834 mm in width, and 1715 mm in height. 2. Engine introduction: The Geely Vision X6 is equipped with a 1.4-liter turbocharged engine. This 1.4-liter turbocharged engine delivers 141 horsepower and a maximum torque of 235 Nm. The engine reaches its maximum power at 5200 rpm and its maximum torque between 1600 to 4000 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block.
19
3
Share

How to Maintain Your Car in Winter?

Winter car maintenance methods are introduced as follows: 1. Wiper Blades and Windshield: Due to weather conditions, wiper blades often freeze to the windshield in winter. Do not force them off; instead, turn on the car's air conditioning, set it to blow air towards the windshield to raise its temperature. This also helps check if the heating system is functioning properly. Regularly clean the heating system to ensure good air quality inside the car. 2. Body and Chassis: The car's exterior inevitably gets damaged while driving, or even when parked. In winter, with rain and snow, the car's exterior is prone to corrosion. Roads are often salted to quickly melt snow, and the tires can splash saltwater onto the chassis, causing rust. Therefore, before winter arrives, thoroughly inspect the car's body, promptly repair any scratches, and apply wax in early winter to protect the paint. A waxed body is less likely to get damp, and ice formation on the car's surface will be significantly reduced. Also, perform rust-proof maintenance on the vehicle's chassis to extend its lifespan.
2
1
Share

Where is the child lock on the Audi A4?

Audi A4 child lock is located above the rear door lock mechanisms. Additional information: 1. Use the mechanical key from the remote key to insert into the lock hole, then rotate the key in the direction of the arrow above the lock hole to activate the child lock. Rotate the key in the opposite direction of the arrow to deactivate the child lock function. When the child lock is activated, even if the central door lock is in the open state, the door cannot be opened from inside the vehicle and can only be opened from the outside door handle; 2. There is also a child safety feature at the central window control button on the driver's side door panel. Pressing this button will illuminate the indicator light in the button, deactivating the rear door window switch and preventing rear passengers from controlling the window operation via the rear door switches. When children are seated in the rear, the window lock switch should be pressed promptly.
14
0
Share

What Are the Reasons for the ETC Barrier Not Lifting When Entering the Highway?

Reasons for the ETC barrier not lifting when entering the highway include detachment or removal of the ETC device; ETC device malfunction; lane malfunction; pass card malfunction; or being blacklisted. In such cases, it is necessary to promptly contact on-site staff for assistance. How ETC Works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to perform backend settlement processing with the bank. This allows vehicles to pass through highway or bridge toll stations without stopping while still paying the toll. ETC Usage Notes: The ETC transaction sensing range is 8 meters. When encountering a vehicle in front that has stopped, to prevent the front vehicle's ETC device from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and payment for the front vehicle. The ETC lane recognition speed is 20 km/h. If the vehicle speed is too fast, the vehicle device information cannot be read, which will also result in payment failure. Unauthorized removal or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. Non-deliberate loosening or detachment only requires reactivation. When using a debit card linked to ETC, insufficient balance will also cause payment failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield can cause poor sensing. This is especially important for vehicles that have had their windshields replaced after an accident or for those who have modified their front windshields.
4
5
Share

Do You Need to Replace Coolant in Hot Weather?

Hot weather does not necessitate coolant replacement, as coolant change is not related to weather conditions. For vehicles that operate for extended periods, such as taxis, high-quality coolant should generally be replaced annually. Vehicles with shorter operating hours can have their coolant replaced every two years or every 30,000 kilometers. How to Replace Coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipelines, with a particular focus on the five-way hose. Coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there are any signs of coolant leakage in this area, replace the hose or resecure the connection as needed. Drain the old coolant and then flush the fluid channels with clean water. Add clean water to the coolant reservoir and continue to fill it until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will have a faint pink tint. Continue adding clean water until the drained water runs clear. Note: Remember to remove the heater hose and drain all water from the heater core. Approximately one hour after draining, add new coolant through the radiator hose. Then, pour another container of coolant into the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As the cooling system expels some air, the coolant level will drop slightly. Top up the coolant until it reaches the "MAXT" mark on the reservoir.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.