What kind of engine oil is best for the Teana?

2 Answers
KadenDella
08/29/25 7:25am
Teana uses fully synthetic engine oils such as 5W-30SN, 0w-40SN, or 0W-30. Below are the specific details about the Teana: 1. The Teana is a mid-size sedan under the Nissan brand. Some models of the Teana are equipped with a 3.5-liter V6 naturally aspirated engine, with a wheelbase of 2775 mm, and dimensions of 4930 mm in length, 1795 mm in width, and 1475 mm in height. 2. The 3.5-liter naturally aspirated engine in the Teana delivers 252 horsepower and a maximum torque of 326 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. It features a continuous variable valve timing system and multi-point fuel injection technology, with an aluminum alloy cylinder head and block. This engine is paired with a CVT transmission.
Was this review help?
20
1
Share
SanKarter
09/11/25 4:57am
I've been driving my Teana for nearly ten years, mainly in urban areas and on highways, so I'm particularly concerned about engine oil selection. I recommend using 5W-30 full synthetic oil, such as Mobil or Castrol brands, as the manual clearly states it's suitable for the Teana's 2.5L engine. Why? Synthetic oil has strong durability, reduces engine wear, and provides better protection, especially during frequent start-stop situations. Additionally, consider climate factors: 0W-20 is better for cold starts in northern winters, while 5W-30 is more suitable for hot southern weather. Personally, I change the oil every 5,000 kilometers and combine it with inspections at authorized shops to avoid counterfeit products. In short, choosing the right oil not only saves fuel costs but also extends your car's lifespan—safety first.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Determine When a 12V Battery is Fully Charged?

Methods to determine when a 12V battery is fully charged: You can judge by the charging time. Typically, the battery capacity of a household car is around 60Ah, and the required charging current is one-tenth of the battery capacity, which is 6A. Charging at this current usually takes about 3 to 5 hours to fully charge. If charging with a lower current, it may take around 10 hours to fully charge. The car battery is an essential part of the vehicle and can be divided into traditional lead-acid batteries and maintenance-free batteries. Since the battery uses a lead-calcium alloy for the grid frame, the amount of water decomposition during charging is minimal, and water evaporation is also low. Additionally, the sealed structure of the casing releases very little sulfuric acid gas. Therefore, compared to traditional batteries, it has advantages such as not requiring any liquid addition and having a long power storage time.
17
5
Share

How many kilometers do car spark plugs need to be replaced?

Car spark plug replacement cycle: Ordinary copper-core spark plugs need to be replaced approximately every 30,000 kilometers; precious metal spark plugs need to be replaced approximately every 80,000 kilometers. Strictly speaking, there is no uniform standard answer for how many kilometers car spark plugs need to be replaced, as there are many objective factors that can affect the replacement time. The owner's driving habits, usual road conditions, different car models, different brands, and the quality of the spark plugs will all significantly impact the replacement time. It is recommended to check the vehicle's user manual, which will provide detailed instructions. Simply follow the instructions in the manual for replacement.
12
5
Share

How to turn off the daytime running lights on a Golf car?

The daytime running lights on a Golf car cannot be turned off, and the daytime running lights cannot be turned off as they are a safety feature for daytime driving. If you want to turn off the daytime running lights, you need to use a specialized computer to change the coding, and only a 4S shop can perform this operation. The Golf is a small family car model introduced by Volkswagen, with body dimensions of 4199mm in length, 1786mm in width, and 1479mm in height, and a wheelbase of 2578mm. In terms of appearance, the Golf adopts a family-style design concept, with a double-bar grille paired with sharp-angle headlights, creating a stylish yet stable look; the side profile features slender lines, and the rear is simple and robust, with LED taillights that enhance its visual appeal.
19
4
Share

What is the difference between Mercedes-Benz C200 and C260?

The difference between Mercedes-Benz C200 and C260 lies in their power: the C200 has a maximum power of 135 kW (184 hp), while the C260 has a maximum power of 180 kW (245 hp). The Mercedes-Benz C-Class sedan is equipped with an active safety system, intelligent lighting system, preventive safety system, passenger safety protection system, and rescue tools, making it comfortable, refined, practical, and top-notch in safety. In terms of body dimensions, the Mercedes-Benz C-Class measures 4581mm in length, 1810mm in width, and 1448mm in height, with a wheelbase of 2760mm. Externally, the C-Class features a stylish and elegant design, strong handling performance, and a classic brand appeal. The interior of the C-Class is finely crafted, with excellent sound system quality.
9
1
Share

What documents are required to apply for ETC?

According to the "Implementation Plan for Accelerating the Application Service of Electronic Toll Collection on Highways" issued by the Ministry of Transport, the following documents are required: the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate (the page with the most recent annual inspection stamp must be provided). If applying on behalf of someone else, the original valid ID card of the agent is also required. If applying for ETC through major bank branches, a debit card or credit card from the respective bank must be prepared. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount of funds as a deposit when binding ETC with a debit card. ETC Deduction Principle: There will be one or more ETC lanes on highways. Through microwave dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with the bank, the purpose of paying tolls without stopping at the toll station is achieved. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, thereby decreasing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, lowers wear and fuel consumption, and users can also enjoy a 5% discount on toll fees; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also explicitly set the goal in the main indicators of the "13th Five-Year" comprehensive transportation development: "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-to-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications. ETC Usage Notes: The ETC transaction sensing area is 8 meters. When encountering a stopped vehicle ahead, to prevent the ETC device of the preceding vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the preceding vehicle to avoid automatic sensing and paying for the preceding vehicle. The recognition speed for ETC lane passage is 20km/h. If the speed is too fast, the vehicle device information cannot be read, which will also result in failed deductions. Unauthorized removal or movement of the OBU device, detachment, or loosening of the ETC electronic tag will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for inspection. Non-human-induced loosening or detachment only requires reactivation. When using a debit card bound to ETC, insufficient balance will also result in failed deductions. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield may cause poor sensing. This is especially important for vehicles that have had accidents and had their windshields replaced or for those who have modified their front windshields.
12
1
Share

How Long Does a Car Need to Sit to Be Considered a Stock Vehicle?

Cars that have been sitting for more than three months are considered stock vehicles. Stock vehicles generally refer to cars that have not been sold for more than three months after leaving the factory. There are two common types of stock vehicles: those that have spent the stock period in the manufacturer's warehouse and those that have spent the stock period in the dealer's warehouse. When purchasing a stock vehicle, it is necessary to carefully inspect the car's condition. Stock vehicles refer to cars that have not been sold in time, and as for stock vehicles and stock time, there are no explicit legal provisions or definitions. Generally, it is 3 to 6 months, sometimes more than 6 months or even over a year, and in extreme cases, several years. Regarding the stock time, the production date of the vehicle can be seen on the car's nameplate on the side of the passenger seat or in the engine compartment. The time from the production date is the stock time.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.