What kind of engine oil is best for the Honda Vezel?

Can car leather seats be wiped with wet wipes?

Car leather seats can be wiped with wet wipes. If there are stains on the seats, you can use a semi-dry wet wipe to gently clean the surface. The natural oils from the human body can actually nourish the leather. Treated leather has advantages such as resistance to acids and alkalis, UV protection, wear resistance, and anti-wrinkle properties, so generally, it doesn't require much maintenance. The care methods for leather seats include: 1. Keep away from heat sources, as proximity can cause the leather to crack; 2. Avoid prolonged exposure to direct sunlight to prevent fading; 3. Regularly clean and maintain by using a semi-dry cloth to remove dust and keep the seats dry and tidy; 4. Use a small amount of multi-purpose foam cleaner for occasional deep cleaning, ensuring the leather surface remains dry.

14

2

Share

What is the fuel tank capacity of the BMW 320li in liters?

The fuel tank capacity of the BMW 320li is 59L. This data is officially released, and owners who have purchased the BMW 320li can also check it on the vehicle's configuration sheet. The fuel grade for the BMW 320li is 95, with a fuel consumption of 6.1L per 100 kilometers. A full tank can cover a distance of 962km. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. Generally, this is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will accurately reflect on the gauge. The fuel gauge on the dashboard usually has 5 to 6 segments. It is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated volume. This is because the fuel tank volume marked by the car manufacturer is from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space ensures that the fuel in the tank can expand when the temperature rises without overflowing the tank's safety space. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank volume.

19

1

Share

What are the reasons for ETC alarm?

ETC alarm may occur due to the following reasons: The newly arrived device has not yet been activated. It is normal for the device to beep when driving on the highway, but continuous beeping indicates an abnormality in the mailed device. The newly arrived device may have low battery due to shipping and storage time. If the solar panel is installed under a dark film, it may not be able to store electricity. If the anti-tamper button is pressed and released during installation, it may cause the device to beep. During the first installation of the ETC device, the sensor position on the glass may not be pressed firmly enough. ETC installation process: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. The red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the protective film on the back of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.

5

0

Share

What does exam appointment location failure mean?

The reasons for exam appointment location failure are as follows: 1. May not meet the ministry's time limit requirements. 2. Too many applicants for a single test site. When the number of applicants for a single exam exceeds the planned number of examinees, students ranked lower will fail to make an appointment. 3. Too many exam sessions applied for. Students can apply for up to five exam sessions simultaneously for a single test, but may only successfully schedule one, with the system indicating failure for the other four sessions. Relevant information about the driver's license exam is as follows: 1. Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can one obtain a driver's license and legally operate motor vehicles. 2. Content: The motor vehicle driver's test content is divided into the road traffic safety laws, regulations, and related knowledge test subject (also known as the "theoretical test", referred to as "Subject 1"), the site driving skills test subject (commonly known as the "pole test", referred to as "Subject 2"), and the road driving skills and safe civilized driving common sense test subject (commonly known as the "road test", referred to as "Subject 3"). The test content and passing standards are uniform nationwide, with corresponding test items specified according to different permitted driving vehicle types.

17

3

Share

Can maintenance records be checked if not serviced at a 4S shop?

If the vehicle is not serviced at a 4S shop, the maintenance records cannot be checked. Here are some precautions regarding vehicle maintenance: 1. Regularly clean body stains: The paint surface of the vehicle body will deteriorate over time if continuously exposed to stains, leading to dullness and reduced glossiness. Therefore, it is necessary to protect the paint surface by regularly cleaning the body to maintain its cleanliness. 2. Regularly change the engine oil: Engine oil has a limited service life. It is important to replace the vehicle's engine oil periodically, as prolonged use causes the oil to become increasingly turbid, which can damage the car's engine. Hence, special attention must be paid to engine oil maintenance during servicing.

6

0

Share

What does 96Y mean on a tire?

96Y refers to the maximum load capacity and speed rating of the tire. 96 indicates that each tire can bear a maximum load of 710kg, so four tires can support 2840kg in total. Y represents a maximum speed of 300km/h. These are common indicators for maximum load and speed ratings. Functions of tires installed on vehicles: 1. Load-bearing capacity: Supporting the weight of the vehicle and its cargo, known as load-bearing capacity. 2. Dynamic performance: Transmitting forces such as braking, traction, acceleration, steering, and braking to the ground, including driving force, traction force, braking force, and steering force. This is referred to as meeting the dynamic performance requirements of the vehicle, enabling its operation. 3. Safety: Ensuring the vehicle can be driven smoothly, stably, and safely under various weather, road, and speed conditions, known as safety performance.

3

4

Share

What kind of engine oil is best for the Honda Vezel?

Can car leather seats be wiped with wet wipes?

What is the fuel tank capacity of the BMW 320li in liters?

What are the reasons for ETC alarm?

What does exam appointment location failure mean?

Can maintenance records be checked if not serviced at a 4S shop?

What does 96Y mean on a tire?

What is the fuel consumption of the Chery GX?

What are the correct steps for starting the car in Subject 3?

What is the relationship between the steering wheel direction and the car direction?

Why is it always difficult to engage first gear in Haval H6 manual transmission?