What kind of engine oil is best for the CS55?

1 Answers
Freya
07/30/25 5:37am
For the Changan CS55, Shell HX7 5w-40 synthetic engine oil is recommended, with an oil capacity of approximately 4 liters. Below is relevant information about engine oil: 1. Function: Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. 2. Classification: Gasoline engine oils are divided into mineral oils and synthetic oils, with synthetic oils further categorized into semi-synthetic and full-synthetic oils. 3. Composition: Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of the base oil, imparting new characteristics, making them an essential part of lubricating oil.
Was this review help?
16
1
Share
More Forum Discussions

Which has lower fuel consumption, the Tank 300 or the Wrangler?

The Wrangler's fuel consumption is 9L/100KM. Definition of fuel consumption: Vehicle fuel consumption refers to the amount of fuel consumed when driving a certain distance (100 kilometers) at a constant speed, serving as a theoretical indicator for vehicles. The 100km fuel consumption is a value obtained by manufacturers under controlled conditions using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated as the theoretical experimental fuel consumption data for the model when driven at specified speeds. Categories of fuel consumption: Fuel consumption includes constant-speed fuel consumption and road cycle fuel consumption. Constant-speed fuel consumption refers to the fuel economy indicator when a vehicle travels at a constant speed on good road surfaces. Road cycle fuel consumption is the fuel economy indicator measured when a vehicle follows specified speed and time protocols for repeated cyclic driving on roads, also known as multi-condition road cycle fuel consumption.
13
0
Share

What is the actual measured ground clearance of the Regal?

The ground clearance of the all-new Buick Regal is approximately 152mm, while the 2014 model has a ground clearance of 163mm. Ground clearance of other vehicles: Generally, the ground clearance of sedans ranges from 120-200mm, off-road vehicles typically have 210-370mm, and buses maintain 220-370mm. Introduction to minimum ground clearance: Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting surface when fully loaded and stationary, indicating the vehicle's ability to pass over obstacles like rocks or stumps without collision. It represents the distance between the vehicle's lowest point (excluding wheels) and the road surface when fully loaded, demonstrating its capability to overcome obstacles such as rocks. Smaller ground clearance indicates poorer obstacle-crossing ability.
15
3
Share

How much horsepower does the G-Class have?

The latest Mercedes-Benz G-Class engine: 4.0T-V8, 585 horsepower, length-width-height (mm): 4873-1984-1966, transmission type: 9-speed automatic transmission. Metric horsepower: Metric horsepower, also known as PS, is completely man-made with a value very close to imperial horsepower. It is defined as 1 metric horsepower being the power required to lift 75 kilograms one meter in one second. That is: 1 metric horsepower = 75 kilogram-force meters/second = 735 watts. Imperial horsepower: The concept of horsepower as a unit was named by James Watt, the improver of the steam engine, to represent the power of his steam engine relative to a horse's pulling power. It is defined as "the power of a horse capable of pulling 33,000 pounds at a speed of one foot per minute", with watt (W) or kilowatt (kW) being the standard units.
1
1
Share

Is the BMW X3 based on the 3 Series chassis?

BMW X3 is based on the 3 Series chassis. The latest generation model continues to use the widely acclaimed 3 Series chassis structure. In terms of body dimensions: The BMW X3 measures 4717mm in length, 1891mm in width, and 1689mm in height, with a wheelbase of 2864mm. In terms of configuration: It is equipped with a 2.0T L4 engine, featuring turbocharged intake, delivering a maximum horsepower of 184ps and a maximum torque of 290nm. The transmission is an 8-speed automatic with manual mode, and the top speed is 210 km/h. In terms of power: The BMW X3 features front-engine four-wheel drive, with a front suspension type of double-joint spring strut and a rear suspension type of multi-link independent suspension. The steering assistance type is electric power steering, and the body structure is unibody.
1
5
Share

What engine does the Haval M2 use?

The Haval M2 is equipped with the GW4G15 engine, which has a displacement of 1.5L. This engine adopts VVT technology and features an all-aluminum body, effectively balancing power and fuel consumption. It ensures that the Haval M2 delivers maximum power with minimal fuel consumption, addressing the common concern about SUV fuel efficiency. The combined fuel consumption is only 6L per 100 kilometers. Overview of the engine: An automobile engine is the device that provides power to a vehicle, determining its performance, fuel economy, stability, and environmental friendliness. Depending on the power source, automobile engines can be categorized into diesel engines, gasoline engines, electric motors, and hybrid systems, among others. Additional information about engines: Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines, capable of converting the chemical energy of fuel into mechanical energy for piston movement and outputting power. Gasoline engines have high rotational speeds, are lightweight, produce less noise, are easier to start, and have lower manufacturing costs. Diesel engines have higher compression ratios, better thermal efficiency, and superior fuel economy and emission performance compared to gasoline engines.
14
1
Share

What Are Brake Pads?

Brake pads, also known as brake linings or brake shoes, are essentially the friction material used in braking systems. Here is some relevant information: 1. Brake pads, also referred to as brake linings or brake shoes, are crucial safety components in a vehicle's braking system, playing a pivotal role. The quality of brake pads directly determines the effectiveness of braking and is closely related to the vehicle's safety, making daily maintenance of brake pads particularly important. 2. Brake pads need to be replaced when they wear down to a certain extent to ensure that braking performance is not compromised. Since the wear of the braking system is influenced by various factors, it is best to inspect them approximately every 3,000 kilometers. For newly replaced brake pads, a certain break-in period is required to maximize their braking effectiveness.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.