What kind of engine oil does the Volkswagen Tharu use?

2 Answers
KinsleyLynn
07/24/25 12:33am
Volkswagen Tharu uses 5W-40 fully synthetic engine oil. Engine oil is a crucial factor affecting engine performance and lifespan. The quality of engine oil must not only meet the requirements of the engine and exhaust purification system but also match the fuel quality. Here’s some information about engine oil: 1. Engine oil is the lubricant used in engines, composed of base oil and additives. 2. With a density of approximately 0.91×10³ (kg/m³), engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber. It is often referred to as the 'blood' of a car.
Was this review help?
14
4
Share
VanVera
08/10/25 8:18pm
As an owner of a Volkswagen Tharu, I always use fully synthetic oil for maintenance. The Volkswagen manual recommends the VW 502 00 standard, typically with a viscosity of 5W-40. This oil provides excellent protection, ensuring smooth engine operation under high temperatures and preventing wear. If your car is a newer Tharu with a turbocharged engine, it's advisable to use low-ash oil meeting the VW 504 00 standard, which helps reduce carbon buildup and extends maintenance intervals. Avoid using cheap oil, as it may lead to increased fuel consumption or engine noise. I once tried non-standard oil and noticed more engine vibration during startup, which was resolved only after switching back. Regular oil checks are crucial, with changes recommended every 7,500 to 10,000 kilometers.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What are the key points for steering during A2 parallel parking?

Drive straight with the right side of the vehicle 30 cm from the roadside line. When the starting wheel passes the corner of the parking space by 3 meters, turn the steering wheel to the left. After pulling out at an angle, continue turning the steering wheel to the left. Here are the relevant details: Preparation: For parallel parking, start by aligning the vehicle. Keep the right side of the vehicle approximately 30 cm from the parking space line and drive straight to the starting line. Reversing: Begin reversing from the starting line. Look at the right rearview mirror, and when the corner of the parking space disappears from the mirror, turn the steering wheel fully to the right while reversing. Look at the left rearview mirror, and when you see the inner corner of the parking space, turn the steering wheel one full turn to the left. Continue reversing. When the left rear tire is about to touch the dashed line of the parking space in the left rearview mirror, turn the steering wheel another full turn to the left. Exiting the space: Observe both rearview mirrors. When the vehicle is parallel to the parking space lines on both sides, stop. Turn on the left turn signal to prepare for exiting. When the right corner of the front hood aligns with the right roadside line, turn the steering wheel one full turn to the right. Continue driving forward. When the left one-third of the front hood aligns with the left roadside line, turn the steering wheel another full turn to the right. When the vehicle is parallel to the roadside lines on both sides, straighten the steering wheel. Slowly exit the parallel parking area.
9
1
Share

What materials are needed to help someone else with vehicle inspection?

To help someone else with vehicle inspection, you need to prepare the original vehicle license, the duplicate of compulsory traffic insurance, the original and photocopy of the vehicle owner's ID card, the original and photocopy of the agent's ID card, and a written authorization letter from the vehicle owner. The process of helping someone else with vehicle inspection: Make a phone appointment for the agency service. After the appointment is successful, confirm the time and place for picking up the vehicle. At this time, the agent should remind the owner to prepare the required materials, as well as the valid triangle warning sign and fire extinguisher in the vehicle. After the agent picks up the vehicle, the owner needs to sign the pick-up confirmation form. The agent then drives the vehicle to the agreed inspection center for the inspection. After the inspection is completed, the agent returns the vehicle to the designated location and hands the relevant documents back to the owner. The owner can confirm everything is correct after checking the vehicle. Introduction to vehicle annual inspection: It is a performance inspection for vehicles that have already been registered and licensed. According to national regulations, small and micro non-operational passenger vehicles must be inspected once every 2 years within the first 6 years; once a year after exceeding 6 years; once every 6 months after exceeding 15 years; trucks and large and medium non-operational passenger vehicles must be inspected once a year within the first 10 years; once every 6 months after exceeding 10 years, etc.
16
1
Share

Briefly describe the purpose and main content of comprehensive vehicle performance testing

Briefly describe the purpose and main content of comprehensive vehicle performance testing as follows: 1. Purpose: To determine the working capacity and technical condition of operating vehicles within a specified period without disassembly. 2. Main content: Identify the location and cause of faults or hidden dangers, implement quality supervision for vehicle maintenance, establish a quality monitoring system, and ensure vehicles have good safety, reliability, economy, and environmental protection. Vehicle safety testing includes braking, steering, side slip, speed, and lighting (headlights). Operational reliability testing refers to abnormal noise, wear, deformation, and crack detection.
20
2
Share

What are the precautions for selling a car and transferring ownership?

Precautions for selling a car and transferring ownership are as follows: 1. Vehicle condition: When selling a used car, never conceal records of collisions, water immersion accidents, etc. Provide an accurate description of the vehicle's specific condition. Timely complete the transfer and name change procedures for vehicle documentation and insurance to avoid disputes during later use. 2. Contract: Before selling the car, settle any personal traffic violations. After agreeing on a price, it is recommended to engage a formal processing company to save time. When conducting the vehicle sale, both parties should sign a sales contract upon reaching mutual agreement.
18
5
Share

Do You Need to Press the Brake When Shifting to S Gear?

You do not need to press the brake when shifting to S gear. The speed in S gear is below 90 km/h. Below are the main scenarios for using S gear: 1. Overtaking. When in a hurry to overtake, if you feel that the acceleration (speed) in S gear is too slow and does not reach the desired speed, you can directly shift into S gear without pressing the brake. At this time, the engine speed increases, and the vehicle speed will significantly improve. After overtaking, shift back to D gear directly, also without pressing the brake. If you already have considerable speed in D gear during overtaking, simply increasing the throttle is sufficient to overtake, and using S gear is not recommended. Shifting back to S gear at excessively high speeds may damage the gears. 2. Steep slopes and uphill/downhill driving. For starting on very steep slopes or prolonged uphill driving, it is recommended to use S gear. S gear provides greater torque, allowing for smooth starts with just a slight increase in throttle. For prolonged uphill driving, especially on steeper slopes, S gear is more suitable. However, it is important to note: on long slopes, you should not aim for high speed; a slight increase in throttle is sufficient, otherwise, it will consume more fuel and easily raise the engine temperature. If D gear feels insufficient when going uphill, you can directly shift into S gear without pressing the brake. For long downhill driving, if the slope is too steep, it is recommended to use S gear. However, if you were previously using D gear for downhill driving, switching to S gear requires pressing the brake depending on the speed to slow down before switching.
13
5
Share

For how many years can a vehicle not be insured under auto damage insurance?

Generally, private vehicles over 8 years old are not covered by auto damage insurance, and very few insurance companies will insure vehicles over 10 years old. Overview of auto damage insurance: Auto damage insurance refers to a type of commercial vehicle insurance where the insurer compensates within reasonable limits for damages to the insured vehicle caused by an insured accident while the vehicle is being driven by the policyholder or an authorized driver. Coverage of auto damage insurance: Vehicle damage insurance typically covers losses to the insured vehicle caused by natural disasters such as lightning, storms, heavy rain, floods, etc., as well as accidents like collisions and overturns, along with related rescue expenses.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.