What kind of engine oil does the Land Rover Evoque use?

3 Answers
McGrace
07/29/25 11:28pm
The Land Rover Evoque uses 5W30 full synthetic engine oil, which is suitable for its turbocharged engine. Engine oil, as a lubricant, plays crucial roles in the engine including lubrication, cleaning, cooling, sealing, reducing wear, damping vibrations, and preventing rust and corrosion. The Land Rover Evoque is a compact SUV under the Land Rover brand, with dimensions of 4355mm in length, 1965mm in width, and 1605mm in height, and a wheelbase of 2662mm. It is equipped with a turbocharged 2.0TSi4 engine featuring direct injection technology, delivering a maximum power output of 240 horsepower, paired with an AWF-21 six-speed automatic transmission.
Was this review help?
3
1
Share
DiAshley
08/16/25 2:14am
I've been driving a Range Rover Evoque for several years and would like to share my experience. For engine oil, you must use full synthetic oil. The most commonly recommended viscosity is 5W-30, which I've been using all along. The engine runs exceptionally smooth with it, saving fuel and reducing noise. When selecting oil, always refer to the vehicle manual or consult a professional shop. Don't casually use cheap mineral oil, as it may damage turbocharged components. I started learning by manually checking the oil level: when the engine is cold, open the hood, pull out the dipstick, wipe it clean, reinsert it, and check if the oil level is between the middle marks. The replacement interval is approximately every 15,000 kilometers or once a year. In winter, use slightly thinner oil to prevent cold start difficulties. DIY oil changes can save money, but be sure to dispose of used oil properly by taking it to a recycling center. Overall, choosing the right oil significantly extends the vehicle's lifespan and gives great peace of mind while driving.
Was this review help?
17
4
Share
Expand All
ZacharyLynn
10/19/25 2:17am
As an auto mechanic, I must say the Land Rover Evoque performs best with full synthetic oil, and 5W-30 is quite suitable due to the vehicle's design requirements for high viscosity to accommodate modern engines. Synthetic oil offers numerous benefits: excellent oxidation resistance, strong fluidity, and reduced friction to protect internal engine components. Never use conventional oil, as it tends to cause carbon buildup, leading to sluggish acceleration or malfunctions. From a professional standpoint, always check the oil quality before changing: if the dipstick shows black or has an unusual odor, replace it immediately. Recommended brands like Castrol Edge, with official certifications, are more reliable. It's advisable to change the oil every 10,000 to 15,000 kilometers, or adjust the interval based on driving habits if they are more demanding. Using the wrong oil carries significant risks, such as piston seizure, resulting in costly overhauls. Regular checks by the owner can prevent roadside issues.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What are the methods for parallel parking entry and exit?

First, you must understand parallel parking. After parking, there is a reference point at the rear of the car corresponding to the horizontal line of the parking space for operation. Exiting is simple: turn the steering wheel fully to the left, and when the left side of the car's front aligns with the roadside line ahead, straighten the wheel and proceed straight.
3
5
Share

Where is the air intake located on the Magotan?

It is located at the grille area. You can identify the intake system by spotting a thick tube connected to the engine (intake pipe) along with an air filter box, which then connects to the grille. The air intake utilizes forward motion to collect and channel air into the engine or ventilation system. Primary functions of automotive air intake: Air delivery: Supplies clean, dry, sufficient, and stable air to the engine to meet its operational requirements, preventing contaminants and large particulate matter from entering the combustion chamber, which could cause abnormal engine wear. Noise reduction: Another critical role of the intake system is to minimize noise and regulate airflow. Excessive noise not only affects the vehicle externally but also impacts cabin noise levels, significantly influencing ride comfort. The design quality of the intake system directly affects engine power output and acoustic performance, which correlates with overall vehicle comfort. Properly designed muffler components can reduce subsystem noise and enhance the vehicle's NVH (Noise, Vibration, and Harshness) performance.
4
5
Share

What does it mean when 6 warning lights are on in a Magotan?

There are many possible reasons for the engine warning light to come on in a Magotan. It could be due to wiring issues, sensor malfunctions, control module failures, poor fuel quality, unclean engine cylinders, or carbon deposits. It is recommended to visit a 4S shop or repair facility as soon as possible to inspect the relevant modules and components. Below is some relevant information: Notes: If other warning lights remain on, it is necessary to have the corresponding modules and components checked at a 4S shop or repair facility. If only the engine warning light is on, try restarting the vehicle and observe whether the light remains on. If the engine warning light turns off, there is no issue. However, if it stays on, the engine-related components and modules should be inspected at a 4S shop or repair facility. Magotan: The Volkswagen Magotan is closely related to the Passat B6, known as the Future B6, and is the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, "Mai" symbolizes confidence, decisiveness, and dynamism, while "Teng" represents soaring, surpassing, and passion.
10
2
Share

What are the reasons for the engine light to come on in a Mazda6?

The reasons for the engine light to come on in a Mazda6 are: 1. Damaged ignition coil or large spark plug gap; 2. Short circuit in the engine wiring; 3. Leakage in the ignition system; 4. Faulty oxygen sensor or failed catalytic converter; 5. Poor performance of the fuel pressure regulator or dirty fuel filter. The solutions for the engine light to come on in a Mazda6 are: 1. Open WDS for fault diagnosis; 2. Check the solenoid valve and wiring harness; 3. Repair the wiring harness and replace the PCM. Taking the 2015 Mazda6 as an example, its body dimensions are: length 4670mm, width 1780mm, height 1435mm, wheelbase 2675mm, and fuel tank capacity 64L. The 2015 Mazda6 is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 147PS, maximum power of 108kW, and maximum torque of 183Nm.
7
0
Share

What brand is the audio system in the Magotan 330 Luxury model?

The audio system in the Magotan 330 Luxury model is from the Dynaudio brand. Car audio systems are installed to alleviate the monotony of driving and traveling for both the driver and passengers. For music-loving car owners, listening to music while driving can be particularly enjoyable, but it's important to keep the volume at a reasonable level to avoid compromising driving safety. Here is some relevant information: Audio Brand: Initially, car audio systems started with AM radios, later evolving to AM/FM radios, cassette players, and then to CD players compatible with DCC and DAT digital audio. Today, car audio systems have reached high standards in sound quality, operation, and vibration resistance, capable of withstanding the bumps of rough roads while ensuring stable performance and perfect sound quality. Components of Car Audio Systems: Head Unit: The source of car audio. Head units include RADIO-only units, RADIO plus MP3 units, CD units, MP3 plus CD changers, CD plus navigation units, and CD/DVD/car MP5 units, DVD players, etc. Speakers: The sound-producing units of car audio systems, converting electrical energy into sound waves. These include tweeters, mid-range speakers, woofers, and subwoofers.
12
1
Share

How to Match the Tire Pressure Sensor for Buick LaCrosse?

Buick LaCrosse tire pressure sensor replacement and matching method is as follows: 1. With the vehicle ignition on, turn the left stalk on the steering wheel to select and enter the tire pressure display column. 2. Press the SET/CRL button on the left stalk (for about 2 to 3 seconds). 3. The onboard computer prompts for tire pressure monitoring relearning, select Yes (enter tire pressure monitoring relearning mode), (otherwise no learning). 4. The horn beeps twice, indicating that tire pressure monitoring relearning is in progress. (The onboard computer also displays: Tire pressure learning). 5. The vehicle's left turn auxiliary light stays on, and the left mirror turn signal stays on, indicating that the left front tire pressure relearning is in progress. At this time, increase (inflate) or decrease (deflate) the left front tire pressure for about 5 seconds (or +8KPa value). This completes the relearning process for the left front tire pressure monitoring, and the horn beeps to prompt entry into the tire pressure learning mode. 6. The horn beeps twice, and the turn signal stays on for about 3 seconds, indicating that the four-tire pressure monitoring relearning is complete.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.