What kind of engine oil does the Haval F7x use?

1 Answers
CameronLynn
07/25/25 5:07am
Haval F7x uses fully synthetic engine oil with a viscosity of 40. Engine oil is known as the blood of the engine and plays a crucial role inside the engine. Without engine oil, the engine cannot function properly. In the engine, oil not only lubricates but also cleans, seals, dissipates heat, prevents rust, and cushions. The dimensions of the Haval F7x are 4620mm in length, 1846mm in width, and 1660mm in height, with a wheelbase of 2725mm. The Haval F7x Ultimate Sport Edition is equipped with an intelligent timely four-wheel drive system, featuring six modes: standard, sport, mud, sand, snow, and ECO economy. In terms of power, the Haval F7x Performance Edition is equipped with the existing 2.0T inline four-cylinder engine, and the transmission system still uses a 7-speed dual-clutch gearbox.
Was this review help?
16
4
Share
More Forum Discussions

How to Choose Your Own Car License Plate

Select your license plate online through the official website of the traffic management platform. Below is the process for online license plate selection: 1. Log in: Visit the Ministry of Public Security's Internet Traffic Safety Comprehensive Service Management Platform, locate the "New Vehicle Registration Pre-selection of License Plate" option under the "Motor Vehicle Services" section, and click the "Online Processing" link. 2. Enter basic information: After clicking the "Submit Information" button, proceed to the basic information step. The vehicle owner should select the vehicle management office where they or their organization will handle the new vehicle registration. In the "Confirm Information" step, the owner needs to enter the new vehicle's identification code and the selection certificate. After verifying the accuracy of the information, click the "Submit" button in the dialog box. Once the system verifies the information, it will proceed to the "License Plate Selection Service Instructions" step. 3. Pre-select the license plate: After carefully reading the service instructions, click the "Start Selection" button to begin the selection process. First, identity verification is required. The owner must obtain and enter the SMS verification code to verify the phone number used for pre-selecting the license plate. After obtaining and entering the SMS verification code, wait for the countdown of the "Confirm" button at the bottom of the interface to end, then click the "Confirm" button to verify if the SMS code is correct. Upon successful verification, you will enter the "Pre-select License Plate" step.
5
3
Share

What Are the Benefits of Changing Transmission Fluid?

Transmission fluid replacement offers several benefits: 1. Smoother and more seamless gear shifting; 2. Cleans and lubricates the gear system, prolonging the lifespan of transmission components and ensuring proper operation; 3. Can reduce fuel consumption to some extent. Symptoms indicating the need for transmission fluid change include: 1. Decreased power output - vehicle responds sluggishly during acceleration with noticeable engine RPM noise but poor speed gain; 2. Overheating transmission due to fluid breakdown, damaging bearings and gears; 3. Difficulty starting - at low gears, pressing the accelerator raises RPM but yields minimal travel distance; 4. Gear engagement feels jerky with unsmooth shifting and abnormal transmission noises.
4
4
Share

What to Do When There Is Frost on the Car Glass in the Morning During Winter?

The solutions for frost on car glass in the morning during winter are: 1. Open both windows to allow air convection and eliminate the temperature difference on both sides of the glass; 2. Turn on the air conditioning with both cold and hot air; 3. Wipe the glass with soapy water; 4. Use a towel to remove the frost. The reasons for frost on car glass are: 1. Large temperature difference between the inside and outside of the car; 2. The window temperature is lower than the dew point temperature; 3. There is a temperature difference on both sides of the window. The functions of car glass are: 1. To shield against wind and rain, and reduce noise; 2. To reduce wind resistance and guide airflow; 3. To protect the safety of passengers. The maintenance methods for car glass are: 1. Use windshield washer fluid according to the season; 2. Apply car glass heat insulation film.
8
1
Share

What Causes the Chassis Noise After Parking?

Here are the specific reasons for chassis noise after parking: 1. Cooling sound of the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is 400-800°C. After turning off the engine, its operation gradually stops, and the temperature drops, causing the internal metal components to expand and contract with heat, resulting in noise. 2. Cooling sound of the exhaust pipe: Generally, the exhaust pipe reaches over 200°C during cold idle. When the vehicle is under high load or there is combustion of mixed gases in the exhaust pipe, the temperature can be even higher. Therefore, the exhaust pipe also expands and contracts with heat, producing noise, which typically comes from the front end of the exhaust pipe and the flexible connection. 3. Cooling sound of the turbocharger: Normally, the exhaust gas temperature reaches 600-700°C, accelerating the friction-generated heat from the turbocharger's rapid rotation. After turning off the engine, the heat expansion and contraction are quite noticeable, leading to noise. 4. Noise caused by uneven engine cooling: After driving for a while, the engine temperature becomes very high. After turning off the engine, the temperature of various components drops, and the heat expansion and contraction cannot occur uniformly, causing gaps between internal metal components to contract due to cooling, resulting in friction and noise.
3
0
Share

What are the methods to distinguish between National 5 and National 6 standards?

National 5 and National 6 standards can be distinguished by: 1. Logging into the Motor Vehicle Environmental Protection Network for inquiry; 2. Inquiring at the Vehicle Management Office; 3. Checking the vehicle's environmental protection label; 4. Reviewing the vehicle's factory certificate. National 5 and National 6 refer to standards established to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent and control pollution from exhaust emissions of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The differences between National 5 and National 6 include: 1. Different nitrogen oxide (NOx) emission standards: National 5 sets the NOx emission standard at 0.18 grams per kilometer, while National 6 sets it at 0.16 grams per kilometer. 2. Different particulate matter (PM) concentration emission standards: National 5 sets the PM emission standard at 0.0045 grams per kilometer, whereas National 6 sets it at 0.022 grams per kilometer. 3. Different non-methane hydrocarbon (NMHC) emission standards: National 5 sets the NMHC emission standard at 0.23 grams per kilometer, while National 6 sets it at 0.18 grams per kilometer.
7
1
Share

What is the function of the shark fin on the car roof?

The functions of the shark fin on the car roof: 1. Reduce air resistance: The shark fin is an accessory designed to reduce air resistance. The faster the speed, the more it can split the airflow, thereby lowering the car's resistance. Only when air resistance is minimized can the car become more fuel-efficient. In fact, many cars now have been equipped with shark fins, aiming to reduce fuel consumption through this small configuration. 2. Balance the car body: The shark fin divides the airflow into two equal parts, with one part passing through the left side and the other through the right side, maximizing the car's balance. 3. Receive signals: There are many in-car systems such as wireless radio and car navigation that require external signals to function properly. The shark fin can serve this purpose as it contains a car antenna inside, capable of receiving external signals into the car. 4. Release static electricity: Especially in autumn and winter when the weather is very dry, if static electricity is not discharged in time, it can cause a shock when touching the car body. With the shark fin, static electricity generated inside the car can be discharged immediately. Some car owners also hang an iron chain at the rear of the car for the same purpose. If the car already has a shark fin but too much static electricity is generated inside and cannot be released in time, a chain can also be hung at the rear of the car.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.