What kind of engine oil does the Geely Boyue use?

1 Answers
LouisAnn
07/29/25 9:30am
Geely Boyue uses Shell semi-synthetic engine oil with a specification of 5W-40. The 5W indicates the oil's cold start performance, while the 40 represents the oil's viscosity characteristics at high temperatures. High-viscosity oil is suitable for vehicles that operate at high speeds or under heavy loads. The Geely Boyue is a compact SUV equipped with a 1.8T turbocharged engine that delivers a maximum horsepower of 163 hp and is paired with a 6-speed manual transmission. The dimensions of the Geely Boyue are 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 1670mm. It has a top speed of 195 km/h and a fuel tank capacity of 58L.
Was this review help?
3
4
Share
More Forum Discussions

What to Do If Construction Wall Paint Gets on Your Car?

If construction wall paint gets on your car, here are several solutions: 1. You can use industrial alcohol or paint remover to wipe it off. Be patient during the process—wait until the paint softens before scrubbing. 2. You can take your car to a 4S shop or an auto detailing shop for cleaning. Here are some additional details: 1. Construction wall paint is waterproof, color-retentive, stain-resistant, aging-resistant, and has strong adhesion, so paint that falls or splashes onto the car body won’t easily blow away and is difficult to clean. 2. Paint on the car can affect the gloss of the car’s finish. If it splashes onto the windshield, it can directly impair visibility while driving, reducing safety.
18
2
Share

What are the differences between 1.6L and 1.8L displacement?

The differences between 1.6L and 1.8L displacement are as follows: 1. Different engines: 1.6L displacement: 1.6L 74kW naturally aspirated engine. 1.8L displacement: 1.8L 110kW naturally aspirated engine. 2. Different maximum torque: 1.6L displacement: Maximum torque (N.m) 145/3800. 1.8L displacement: Maximum torque (N.m) 220/2000. 3. Different maximum horsepower: 1.6L displacement: Horsepower 120. 1.8L displacement: Horsepower 150.
14
4
Share

How often should the oil be changed for a 7-speed wet dual-clutch transmission?

7-speed wet dual-clutch transmission oil should be changed every 60,000 to 80,000 kilometers. Below is relevant information: 1. Working principle: The transmission relies on transmission oil for heat dissipation, lubrication, and hydraulic power transfer. If the transmission oil is used for too long, it will significantly reduce the performance of the transmission. When the transmission oil becomes severely contaminated, it can also lead to a series of transmission failures. 2. Hazards of not changing the oil in time: Failing to change the transmission oil promptly can result in weak starts when the car is cold. Additionally, transmission oil deteriorates and evaporates under high-speed and high-temperature conditions, which can accelerate the wear of mechanical components and, in severe cases, damage internal transmission parts. It can also cause the transmission oil to thicken, making it easier for the transmission cooler to become blocked, leading to excessively high transmission oil temperatures, increased wear, and minor slipping phenomena during vehicle operation.
2
2
Share

Why should you accelerate to 60 km/h as soon as possible when entering the highway?

Introduction to the reason for accelerating to 60 km/h as soon as possible when entering the highway: To avoid affecting vehicles traveling on the main lane when merging into traffic. Additional information: On the highway, 60 km/h is the minimum speed limit. Vehicles traveling below the minimum speed limit by less than 20% will not be fined, but those traveling below the minimum speed limit by more than 20% will be fined and receive 3 penalty points. If the speed falls below the minimum limit due to special circumstances such as road construction or traffic congestion, no fine will be imposed. Motor vehicle drivers who violate the regulations with any of the following behaviors will be fined 50 yuan and may have their driver's license suspended for six months: 1. Carrying passengers in violation of regulations. 2. Carrying cargo exceeding 30% of the approved load capacity. 3. Transporting hazardous materials or carrying cargo that exceeds the specified length, width, or height without approval or not in accordance with regulations. 4. Driving more than 20 km/h above the maximum speed limit. 5. Driving below the minimum speed limit under normal conditions. 6. Failing to maintain the required safe distance between vehicles. 7. Failing to wear a seatbelt as required.
9
1
Share

Can I Apply for a Replacement of My Lost Driver's License on 12123?

You cannot apply for a replacement of your lost driver's license on 12123. Here is the relevant information: 1. Driver's License Replacement: If your driver's license is lost, you should go to the vehicle management office (VMO), and any local VMO can handle the replacement. According to national regulations, if an motor vehicle driver's license is lost, the driver should apply for a replacement at the VMO where the license was originally issued or at any other VMO outside the original jurisdiction. When applying, you need to fill out an application form and submit the driver's identity proof and a written statement declaring the loss of the driver's license. If the application meets the requirements, the VMO will issue a replacement driver's license within one day. 2. Reporting Loss: There is no need to report the loss of a driver's license; you only need to apply for a replacement at the VMO promptly. However, when applying for a replacement, you need to fill out a written statement declaring the loss of the driver's license, confirming that the license is indeed lost and stating that any improper consequences caused by the lost license in the future are not the responsibility of the vehicle owner. Once the replacement is completed, the original driver's license, even if found, will be considered invalid.
10
2
Share

What is the difference between 0w20 and 0w30?

0w30 engine oil and 0w20 engine oil differ in the following aspects: 1. High-temperature kinematic viscosity: The kinematic viscosity of 20-grade oil at 100 degrees is around 8, while that of 30-grade oil is about 11, making 30-grade oil more viscous than 20-grade oil. 2. Vehicle compatibility: 0w-20 and 0w-30 are produced to meet the design requirements of different engines, so the oil viscosity should be selected based on the engine's specifications. For example, Japanese, Korean, and American car models typically use 0w-20 oil viscosity, while European cars require 0w-30 or higher viscosity oil.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.