What kind of engine oil does Chery Tiggo 7 use?

3 Answers
VonColton
07/29/25 10:47am
Tiggo 7's dedicated engine oil is Mobil Super (Mobil 1) with SN grade. For daily normal driving, the recommended engine oil model is 10w-40. Suitable engine oil: Choosing the right matching engine oil can maximize the performance of mineral engine lubricants, maintain engine cleanliness, ensure high-level engine performance and protection under most driving conditions, provide anti-wear protection, and reduce oil consumption. Car maintenance cycle: Dealers recommend a maintenance cycle of 5,000 kilometers for Tiggo. During maintenance, it is not necessary to completely replace all the engine oil. The approximate amount needed for each oil change is about 4L.
Was this review help?
7
1
Share
Eddie
08/13/25 3:57pm
I've been driving for many years and am particularly familiar with Chery models. The Tiggo 7 generally uses 5W-30 or 5W-40 fully synthetic oil, depending on your engine version and year. For the newer 1.5T engine, 5W-30 viscosity is most suitable—it flows well under high temperatures, protects engine lubrication, prevents wear, and extends lifespan. I recommend choosing high-quality brands with API ratings SM or SN, such as Shell or Mobil. Never opt for cheap mineral oil, as it can lead to slow cold starts in winter and increased fuel consumption. The oil change interval is about every 8,000 km, but this can be shortened if you frequently drive in stop-and-go traffic. Don’t forget to check the owner’s manual for precise requirements, as using the wrong oil may cause engine shaking or trigger warning lights.
Was this review help?
3
1
Share
Expand All
LondonDella
10/07/25 7:02am
As an ordinary car owner, I've dealt with maintenance issues for my Tiggo 7, where oil selection is quite crucial. I recommend using 5W-30 full synthetic oil, which offers good compatibility and fuel efficiency. Brands like Castrol or domestic Great Wall are both acceptable options. The key is to avoid mixing oils with different viscosities, as engine designs vary, and improper mixing can lead to unstable oil pressure. When changing the oil, check if the dipstick is at the normal level, and inspect the oil quality every 6 months for cloudiness. Timely replacement can enhance acceleration and smoothness. Note that in high-temperature summer regions, 5W-40 oil may provide better stability—don't overlook this small detail. Always refer to the manual to confirm specifications. A single oil change costs less than 200 yuan, saving you from major repair expenses.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

How to Unclog the Sunroof Drain Pipe of Nissan Sunny?

Here are the methods to unclog the sunroof drain pipe of Nissan Sunny: 1. Syringe injection method: Connect a syringe to an infusion tube, first extract the accumulated water in the drain trough to avoid backflow caused by forced injection. 2. Extract the accumulated water: Fill the syringe with clean water, point the outlet of the infusion tube towards the entrance of the drain pipe, control the force based on the resistance during injection. Once water overflows, use the suction method to extract the dirty water mixture. Repeat this process several times to unclog the drain pipe. 3. Air gun blowing method: Use high-pressure airflow to pressure-clean the drain pipe. When unclogging, wrap a piece of cloth around the nozzle to prevent dirty water from splashing onto clothes and the vehicle. Avoid setting the air pressure too high, as it may cause the rubber joint and drain pipe to detach, worsening the leakage problem. After blowing, pour clean water into the entrance of the drain pipe and check if water flows out from the outlet near the tire mudguard. If water flows out, it indicates successful unclogging.
8
3
Share

What are the reasons for difficult cold starts in car engines?

There are several reasons for difficult cold starts in car engines: 1. The cold start injector is clogged with gum deposits, affecting the fuel atomization quality, which causes the cold start injector to fail and not work properly; 2. The thermal switch is short-circuited (contacts normally closed) or open-circuited (normally open). If the contacts are normally closed, the cold start injector will always be in a non-working state; 3. The coolant temperature sensor is faulty, leading to incorrect information transmission; 4. Severe carbon deposits in the intake tract and combustion chamber. The car engine is the device that provides power to the car, acting as the heart of the car, determining its power, fuel economy, stability, and environmental friendliness. Depending on the power source, car engines can be classified into diesel engines, gasoline engines, electric vehicle motors, and hybrids, among others.
12
5
Share

Should the Handbrake Be Pulled After Parking an Automatic Transmission Car?

After parking an automatic transmission car, it is recommended to pull the handbrake in all situations. For the safety of yourself and others, it is advisable for car owners to develop the good habit of pulling the handbrake after parking, especially when parking on slopes. Properly engaging the handbrake can also prevent rolling accidents. The professional term for the handbrake is auxiliary brake, which differs in principle from the main brake. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause plastic deformation of the steel cable. Since this deformation is irreversible, long-term use can reduce its effectiveness and increase the handbrake's travel distance. The handbrake system also includes a return spring. When the handbrake is engaged, the spring is stretched; when the handbrake is released, the spring returns to its original length. With prolonged use, the spring may also undergo corresponding deformation.
18
4
Share

Why is the Kia K4 air conditioning not cooling?

Here are the possible reasons why the Kia K4 air conditioning is not cooling: 1. Reason one: The vehicle's air conditioning system is low on refrigerant. In this case, you need to go to a repair shop to check the system pressure with a pressure gauge. If it's low on refrigerant, it needs to be replenished promptly. 2. Reason two: The surfaces of the vehicle's condenser and radiator are too dirty, leading to poor heat dissipation. In this case, you need to go to a repair shop to clean the surfaces of the condenser and radiator. 3. Reason three: The vehicle's air filter is too dirty, resulting in low air speed. In this case, you need to replace the air filter with a new one. 4. Reason four: The quality of the refrigeration oil in the compressor of the refrigeration system has deteriorated, leading to reduced lubrication efficiency, which can cause damage to the air conditioning compressor. This directly affects the expansion valve and throttle valve, causing them to malfunction and resulting in the car's air conditioning not cooling.
15
4
Share

How Long Before Tree Sap on a Car Becomes Impossible to Remove?

Tree sap on a car can generally be removed, and there is no definitive answer as to how long it will take before it becomes impossible to wash off. However, it is recommended to clean it as soon as possible if you notice tree sap on your car, as it will be easier to remove. Once the sap penetrates the car paint, it can become more troublesome. When there is tree sap on your car, you can try the following methods to clean it: 1. Use rubber clay to wipe: This can also remove some small particles on the paint. 2. Soak a cleaning cloth in warm water: Cover the area with tree sap, wait for a while until the sap softens, and then wipe it off. 3. Use high-proof alcohol: Some methods work very well, as alcohol can dissolve and remove tree sap, but the effectiveness may vary. 4. Use specialized cleaning agents: Such as tar and asphalt cleaners, tree sap-specific removers, etc., which have decent cleaning effects.
20
4
Share

How to Clear the Wrench Light on the Arrizo 5?

The steps to clear the wrench light on the Arrizo 5 are: 1. Turn off the ignition switch and shut down the engine; 2. Locate the "Menu Toggle" button on the steering wheel, which is the button with two overlapping squares; 3. Press and hold the "Menu Toggle" button, then turn the ignition switch to the "ON" position; 4. After the car is powered on, it will start self-checking. Keep pressing the "Menu Toggle" button during this time. Once the self-check is completed, in about 5 seconds, the maintenance light will be cleared. The Arrizo 5 is a sedan produced by Chery. The car has dimensions of 4572mm in length, 1825mm in width, and 1482mm in height, with a wheelbase of 2670mm. It is equipped with a 1.5T engine, delivering a maximum power of 108kw and a peak torque of 210nm, paired with a 7-speed CVT transmission.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.