···
Log in / Register

What kind of engine does GAC Trumpchi use?

4 Answers
AdrianaMarie
07/24/25 11:01am

GAC Trumpchi's engines are independently developed by GAC Group and produced at the group's factory in Panyu. The engine model used in GAC Trumpchi is 4B20J1, with a maximum power of 185 kW, maximum torque of 300 Nm, maximum horsepower of 252Ps, maximum power speed of 5250 rpm, and maximum torque speed range of 1750-4000 rpm. For daily maintenance of GAC Trumpchi's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate out, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

Was this review help?
14
2
Share
McBarrett
08/11/25 2:37am

I've recently studied GAC Motor's vehicles and found their engines quite interesting. Popular models like the GS4 and Emkoo are equipped with 1.5T turbocharged engines, which deliver quick power response and make overtaking in urban areas effortless. Higher-end models like the GA8 and M8 business sedans use 2.0T engines that provide noticeable acceleration and excellent stability at highway speeds. Hybrid models such as the Emkoo Hybrid utilize a 2.0L naturally aspirated engine paired with an electric motor - these dedicated hybrid engines feature high thermal efficiency and exceptional fuel economy, with my friend reporting combined fuel consumption of just 4.5L/100km. GAC now focuses on its third-generation independently developed engines under the 'GAC Power' platform, incorporating high-pressure direct injection and twin-scroll turbo technology. As for drawbacks, the 1.5T engine maintains relatively high RPM during highway cruising, though it's perfectly adequate for daily commuting. I recommend test driving different models to personally experience their engine matching characteristics when choosing a vehicle.

Was this review help?
6
4
Share
Expand All
OBradley
09/25/25 4:09am

GAC Motor's engine models are mainly divided into three categories: the fuel versions are all turbocharged. The 1.5T displacement is used in main SUVs and sedans, offering cost-effectiveness and adequate power; the 2.0T is mainly equipped in high-end models, with over 190 horsepower effortlessly pulling larger vehicles. The hybrid version is the most distinctive, such as the second-generation GS8 hybrid equipped with a 2.0TM engine, where the engine is almost noiseless when the electric motor intervenes during actual driving. From initially introducing Alfa Romeo technology to now independently developing the Julang Power, they have made significant progress. The new engines feature an intelligent thermal management system, providing quick warm-up in winter and efficient cooling in summer. When purchasing a car, pay attention to the engine block material—all-aluminum blocks are lighter than cast iron, offering better fuel efficiency, an area where GAC Motor performs well.

Was this review help?
12
0
Share
Expand All
ONatalie
11/08/25 6:17am

I've been driving a Trumpchi for over five years. The early 1.8T engines were indeed fuel-thirsty, but now it's completely changed. The current mainstay 1.5T engine consumes around 7 liters per 100km in city driving, and the power comes quickly when you step on the accelerator. Once, I drove an M8 fully loaded up a slope, and the 2.0T engine at 3000 rpm delivered full torque without any struggle. The hybrid version is even more impressive—the engine basically only operates at high speeds, and it's so quiet in the city on electric power that it doesn't feel like a fuel-powered car. During maintenance, I recommend paying attention to the exhaust gas recirculation valve, as this part tends to accumulate carbon in turbocharged engines. The most surprising aspect of Trumpchi engines is the sound insulation. The firewall uses thick soundproofing materials, making it quieter than other cars in the same price range when the windows are closed.

Was this review help?
7
2
Share
Expand All
More Forum Discussions

What does 1.8td mean

1.8td refers to turbocharged direct injection. Below is relevant information about turbocharged direct injection: 1. Function: Increases engine air intake, thereby enhancing engine power and torque, making the vehicle more powerful. After applying turbocharging technology, the engine can output greater power while improving fuel economy and reducing exhaust emissions. 2. Working principle: The direct injection engine injects fuel into the combustion chamber during the intake stroke. Since the fuel spray moves slower than the piston's downward speed, the pressure around the fuel spray is lower, allowing the fuel to quickly diffuse and evaporate, forming a homogeneous combustion mixture.
12
2
Share

What is the correct sequence for parking and shifting gears?

The correct sequence for parking and shifting gears is to press the brake pedal, shift from D (Drive) to P (Park), engage the handbrake, release the foot brake, and then turn off the engine and remove the key. Below is relevant information about car gears: 1. P (Park) gear: This is the parking and starting gear. When the car is parked and not in use, it mechanically locks the wheels to prevent the vehicle from rolling. 2. N (Neutral) gear: This is the neutral gear. It is used for temporary stops (such as at traffic lights). Since this gear position means the transmission is disengaged, you must keep your foot on the brake to prevent the car from rolling on a slope. 3. Operation steps: For automatic transmission vehicles, simply push the gear lever to the corresponding position. Manual-automatic transmission vehicles may not have as many gear positions. Besides P, R (Reverse), and N (these three gears are essential for automatic transmission vehicles), the forward gear is usually just D (Drive) (for example, in the FAW Mazda 6). Other gear functions can be achieved through manual mode.
3
4
Share

Where is the VIN code located on the car?

Car VIN code most common locations: the lower left or lower right corner of the front windshield; on the trunk or engine frame; on the door hinge pillar, door lock pillar, or one of the door edges connected to the door lock pillar. Here is some relevant information about the VIN code: The VIN code consists of 17 characters, hence it is commonly referred to as the 17-digit code. It contains information about the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. Correctly interpreting the VIN code is very important for accurately identifying the vehicle model and for proper diagnosis and maintenance.
13
1
Share

What does the license plate 'Yu A' refer to?

License plate 'Yu A' refers to the urban area of Chongqing Municipality. The license plates of Chongqing are as follows: 1. 'Yu A', 'Yu B', and 'Yu D' refer to: the urban area of Chongqing Municipality. 2. 'Yu C' refers to: Yongchuan District of Chongqing. 3. 'Yu F' refers to: Wanzhou District of Chongqing. 4. 'Yu G' refers to: Fuling District of Chongqing. 5. 'Yu H' refers to: Qianjiang District of Chongqing. More information about license plates is as follows: The first character of the license plate is a Chinese character: representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the (province, municipality directly under the central government, autonomous region). The second character of the license plate is an English letter: representing the prefecture-level administrative region where the vehicle is registered, which is the letter code of the (prefecture-level city, region, autonomous prefecture, league).
9
1
Share

What is the appropriate tire pressure for a new car?

New car tire pressure is appropriate between 2.3bar and 2.5bar, and the specific pressure should be based on the manufacturer's recommended tire pressure. The following are reference factors regarding tire pressure: 1. Seasonal factors: a. Winter: Based on the standard tire pressure of the car, it is appropriate to increase it by about 0.2bar. b. Summer: Based on the standard tire pressure of the car, it is appropriate to decrease it by about 0.1bar to avoid tire blowouts due to high temperatures. 2. Load factors: a. Empty load: Follow the lower limit of the standard tire pressure (the tire pressure indicated on the vehicle's label can be used as a reference for the minimum tire pressure). b. Full load: When fully loaded, follow the upper limit of the standard tire pressure (the maximum tire pressure indicated on the tire can be used as a reference for the theoretical maximum tire pressure).
5
0
Share

Where is the car brake light fuse located?

Car brake light fuses are generally located in the engine compartment, and their exact position varies depending on the vehicle model. More information about brake lights is as follows: 1. Brake lights illuminate when the vehicle is braking. They are usually installed at the rear of the vehicle, with a red main color to enhance light penetration and alert other vehicles. 2. In low visibility conditions, they effectively prevent rear-end collisions and reduce traffic accidents. 3. Issues with vehicle brake lights generally fall into two categories: wiring problems or brake light damage. 4. Damaged brake lights will cause the vehicle to fail the annual inspection. According to Article 21 of the 'Road Traffic Safety Law of the People's Republic of China': Before driving a motor vehicle on the road, the driver must carefully inspect the vehicle's safety technical performance and must not drive a vehicle with incomplete safety facilities or components that do not meet technical standards, posing safety hazards.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.