What kind of dual-clutch transmission does the Bestune T77 use?

Where is the coolant temperature sensor located on a Honda 2.4 engine?

Honda 2.4 engine's coolant temperature sensor is located on the radiator, positioned below the radiator's electric fan. It is situated next to the transmission cooling pipe. Composition of the coolant temperature sensor: The coolant temperature and level sensor consists of a thermostat section and a water level control section. It is also accompanied by a pressure reduction device in front of the electric valve and a rotary muffler heater for heating. Function of the coolant temperature sensor: The coolant temperature sensor converts the coolant temperature into an electrical signal, which is input to the ECU to: Adjust the fuel injection quantity; increase fuel injection during low temperatures. Adjust the ignition timing; advance the ignition timing during low temperatures and retard it during high temperatures to prevent knocking. Influence the idle control valve; during low temperatures, the ECU controls the idle control valve based on the coolant temperature sensor signal to increase idle speed, affecting the EGR valve.

8

1

Share

Where is the jack rod?

There is a raised ridge under the car's sill, running from front to back. Any position along this ridge can serve as a support point. Below is relevant information: 1. Jack: A jack is a lightweight lifting device that uses a rigid lifting component as its working mechanism to lift heavy objects within a small stroke through a top support seat or bottom support claw. Jacks are primarily used in factories, mines, and transportation sectors for vehicle repairs and other lifting or supporting tasks. They are compact, sturdy, flexible, and reliable, and can be carried and operated by a single person. 2. Classification: Jacks can be categorized by structural features into rack jacks, screw jacks, and hydraulic (oil) jacks. Other classifications include separated jacks, horizontal jacks, claw jacks, synchronous jacks, hydraulic jacks, and electric jacks. Commonly used jacks include screw jacks, hydraulic jacks, and electric jacks.

5

4

Share

What is the usage method of an automotive oscilloscope?

The usage method of an automotive oscilloscope is: 1. Select the Y-axis coupling method; 2. Select the X-axis sensitivity; 3. Choose the trigger or synchronization signal source and polarity; 4. Select the scanning speed; 5. Input the measurement signal. Phenomena of incorrect usage of an automotive oscilloscope: 1. No light spot or waveform; 2. Failure to expand in the horizontal direction; 3. No display in the vertical direction; 4. Unstable waveform; 5. Inaccurate voltage readings in the vertical direction; 6. Inaccurate readings in the horizontal direction. Reasons for incorrect usage of an automotive oscilloscope: 1. Power not connected, brightness knob not adjusted properly; 2. Improper adjustment of the level knob; 3. Stability potentiometer not adjusted to place the scanning circuit in the critical state of being ready to trigger; 4. Oscilloscope scanning is in the automatic mode, causing unstable waveforms.

10

4

Share

What is the firing order of a four-cylinder engine?

The firing order of a four-cylinder engine can be either 1-2-4-3 or 1-3-4-2, depending on factors such as the crankshaft structure. Here is some relevant information: 1. Working cycle: The working cycle of a four-stroke gasoline engine consists of four piston strokes, namely the intake stroke, compression stroke, power stroke, and exhaust stroke. Currently, all internal combustion engines used are four-stroke engines. The four strokes refer to one working cycle, where the piston moves up and down four times to complete the intake, compression, power, and exhaust processes. 2. Crankshaft: The crankshaft is an important component in a car engine. Its function is to convert the gas force transmitted by the piston and connecting rod into torque, transforming the linear motion of the piston into rotational motion, which is used to drive the car's transmission system, the engine's valve train, and other auxiliary devices.

18

0

Share

Where is the Tire Pressure Monitoring in the Sylphy?

The tire pressure indicator of the Sylphy can be viewed on the instrument display screen, which directly shows the specific values of all four tires. According to the requirements and regulations of the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the completion of the tire pressure reset.

9

5

Share

What is the normal antifreeze level for Mercedes-Benz?

The normal antifreeze level for Mercedes-Benz is when the coolant level is above the fill line mark. If the level is too low, please add antifreeze coolant. Coolant level: The Mercedes GLC coolant reservoir will have water level markings. Under normal conditions: if the cooling system is cold, the coolant level should be above the fill line mark. If the level is too low, please add antifreeze coolant. Before opening the filler cap, let the engine cool down. To add coolant, use a mixture of diluted coolant concentrate and clean tap water in a 1:1 ratio. Function of antifreeze: Antifreeze, also known as antifreeze coolant, is a coolant with antifreeze properties. The engine generates a lot of heat during operation and needs to be cooled. Antifreeze is the circulating fluid used in the engine cooling system. Therefore, antifreeze is mainly used to dissipate heat from the powertrain.

7

0

Share

What kind of dual-clutch transmission does the Bestune T77 use?

Where is the coolant temperature sensor located on a Honda 2.4 engine?

Where is the jack rod?

What is the usage method of an automotive oscilloscope?

What is the firing order of a four-cylinder engine?

Where is the Tire Pressure Monitoring in the Sylphy?

What is the normal antifreeze level for Mercedes-Benz?

What are the effects of a misaligned ETC?

How to Deal with Rust Spots on a White Car?

What are the reasons for the non-functioning tachometer in the BYD F0?

What are the types of NGK spark plugs?