What Kind of Driver's License is Required for a Seven-Seater Vehicle?

2 Answers
MayaFitz
07/24/25 5:21pm
Seven-seater vehicles require a C1 driver's license. More information about the C1 driver's license is as follows: 1. Introduction: The C1 driver's license is one of the license codes, permitting the operation of small and micro passenger vehicles, as well as light, micro cargo vehicles, and light, small, and micro special-purpose vehicles. Applicants can apply for the license directly with their resident ID card at any location nationwide without submitting proof of residence registration. 2. Examination Content: The test subjects include traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. The order of the test subjects is traffic regulations and related knowledge (referred to as Subject 1), field driving (Subject 2), and road driving (Subject 3). During the examination, if a candidate fails a subject, the subsequent subjects will not proceed. Each subject can be taken once with one retake opportunity, and there are five chances for retakes. If a candidate fails after five retakes, the examination is terminated. Within the validity period of the learning driver's license, candidates are allowed to reapply for the examination, with the maximum number of reapplications determined by local traffic authorities, and the interval between examinations must be no less than 11 days.
Was this review help?
6
4
Share
OSavannah
08/11/25 9:36am
My family is large, so we often take a seven-seater MPV to travel with the kids. I remember that a regular car driver's license is sufficient, like the C1 license obtained from driving school, so there's no need to go through the hassle of getting a B license. However, the vehicle must be a private car and not exceed nine seats; otherwise, a higher-level license would be required. Before changing my car last time, I specifically asked the vehicle management office to confirm that my C1 license allows me to drive a seven-seater, and I also checked the vehicle registration to ensure the type wasn't mistaken. Safety comes first—no overloading or drunk driving, as it's too dangerous with the whole family on board.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

How to Maintain an Automatic Transmission?

Automatic transmission maintenance methods are: 1. Follow the manufacturer's requirements for regular inspections and timely replacement of specified transmission fluid; 2. Only about 30% of the total fluid volume can be drained through the drain bolt, and transmission cleaners should not be used; 3. For a complete transmission fluid change, use a transmission cleaner in conjunction with a transmission fluid exchange machine. An automatic transmission is a gear-shifting device that automatically changes gears based on vehicle speed and engine RPM, as opposed to a manual transmission. Types of automatic transmissions include: MT automatic transmission, AMT automatic transmission, AT automatic transmission, CVT automatic transmission, and DSG automatic transmission.
15
2
Share

What are the causes of abnormal noise in the transmission?

Introduction to the causes of transmission noise: 1. Wear and damage of bearings. When bearings wear out, their clearance increases and their fitting accuracy decreases; when bearings are damaged, abnormal noise will occur due to their inability to operate normally, and may even cause damage to the transmission components, leading to further faults. 2. Abnormal gear meshing clearance. This can be caused by wear of transmission components or the use of parts with low precision during replacement, resulting in excessive clearance; or by overly tight gear clearance during assembly. 3. Metal peeling on gear tooth surfaces, broken gear teeth, or misalignment during assembly. 4. Insufficient lubricant leading to poor lubrication. The corresponding lubricant should be replaced. 5. Water ingress into the transmission. If not repaired in time, it may cause noise problems over time.
11
0
Share

What are the differences between the 2019 Passat and the 2020 Passat?

The differences between the 2019 Passat and the 2020 Passat lie in the fuel tank capacity: the 2019 Passat has a fuel tank capacity of 66 liters, while the 2020 Passat has a fuel tank capacity of 68.5 liters. Both the 2019 Passat and the 2020 Passat are mid-sized 4-door 5-seater sedans, with body dimensions of length 4933mm, width 1836mm, height 1469mm, and a wheelbase of 2871mm. Both models are equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
3
2
Share

How Many Days in Advance Can You Renew Your Driver's License?

You can renew your driver's license up to 90 days before its expiration date. The renewal process must be completed at the local vehicle management office. Required documents for renewal include your ID card, driver's license, medical examination certificate, and photos. The vehicle management office is primarily responsible for handling vehicle registration, modification, transfer, mortgage, and deregistration, as well as driver's license applications, replacements, renewals, verifications, and other related services for vehicles and drivers. According to the regulations on the application and use of motor vehicle driver's licenses, drivers must apply for a renewal at the vehicle management office where the license was issued or another office within 90 days before the expiration of their current driver's license.
8
2
Share

What is the correct sequence for parking and turning off an automatic transmission vehicle?

Automatic transmission vehicle parking and shutdown sequence: 1. Depress the brake pedal to ensure the vehicle is completely stopped, then shift into N (Neutral) gear; 2. Engage the parking brake; 3. Shift into P (Park) gear and release the brake pedal; 4. Turn off all unnecessary electrical devices in the vehicle; 5. Verify the gear is in P position, all non-essential electrical devices are turned off, and the steering wheel is straightened; 6. Rotate the key counterclockwise to the end position, or press the engine start/stop button once to switch the ignition to OFF position. Important note: The parking brake must be engaged before shifting into P gear. This practice allows the parking brake to handle the parking load, thereby reducing stress on the transmission system.
13
3
Share

What Causes Fluctuating Car Coolant Temperature?

The reasons for fluctuating car coolant temperature are: 1. Scale buildup on the contact surface between the coolant temperature sensor and the coolant; 2. Aging of the thermistor; 3. Malfunctioning voltage regulator; 4. Short circuit in the temperature gauge heating coil; 5. Needle rubbing against the gauge face. Causes of high coolant temperature include: 1. Poor engine cooling; 2. Prolonged use without cleaning internal and external radiator deposits, affecting coolant circulation and heat dissipation; 3. Damaged fan or other cooling components. Consequences of high temperature are: 1. Accelerated engine wear and reduced oil lubrication effectiveness; 2. Potential radiator rupture due to excessive heat; 3. Increased engine block temperature that may cause cylinder head/block deformation or damage with prolonged exposure.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.