What kind of driver's license is required for a minibus?

1 Answers
AubreyLynn
07/29/25 6:40pm
Minibuses fall under the category of large passenger vehicles and require an A1 driver's license. The vehicles that can be driven with other licenses are as follows: 1. A1 license: Permits driving large passenger vehicles and also allows driving A3, B1, B2, C1, C2, C3, C4, and M type vehicles. 2. A2 license: Permits driving heavy and medium-sized full or semi-trailer freight trains and also allows driving B1, B2, C1, C2, C3, C4, and M type vehicles. 3. A3 license: Permits driving city buses with a capacity of 10 or more passengers and also allows driving C1, C2, C3, and C4 type vehicles. 4. B1 license: Permits driving medium-sized passenger vehicles, including city buses with 10 to 19 passengers, and also allows driving C1, C2, C3, C4, and M type vehicles. 5. B2 license: Permits driving heavy and below trucks and also allows driving C1, C2, C3, C4, and M type vehicles.
Was this review help?
8
2
Share
More Forum Discussions

What are the advantages of SAIC Blue Core engines?

SAIC Blue Core engines are primarily known for their superior quality and high durability. Below is a detailed introduction to the advantages of SAIC Blue Core engines: 1. Composition: The SAIC Blue Core engines consist of two series: SGE and MGE. The SGE series was jointly developed by SAIC and General Motors, comprising a total of 11 engines with displacements ranging from 1.0L to 1.5L, including both three-cylinder and four-cylinder configurations, as well as turbocharged and naturally aspirated variants. The SAIC Blue Core engines emphasize fuel efficiency, durability, and strong power output. 2. Related Data: The power output ranges from 56 kW to 123 kW, and torque ranges from 95 Nm to 250 Nm. Currently available in the market are the 1.0T, 1.4T, and 1.5T turbocharged engines. The MGE series engines are independently developed by SAIC, focusing on the development of SAIC's inline all-aluminum four-cylinder engines, with displacements mainly including 1.8T, 2.0T, and 2.0L. Their power output ranges from 120 kW to 162 kW, and torque ranges from 200 Nm to 350 Nm.
17
1
Share

What is the purpose of the line on the rearview mirror?

The function of the line on the rearview mirror is: the glass on the outer side of the line changes its curvature, resulting in two different curvatures on the same reflective surface of the rearview mirror. This design provides a wider field of view for the rearview mirror, reducing blind spots while driving and lowering the likelihood of traffic accidents. Additional information: 1. If there is such a line on the rearview mirror, it is called a dual-curvature rearview mirror, meaning the inner and outer sections of the mirror have different curvatures. 2. This line is vertically positioned, located one-third of the way from the side closest to the vehicle body. 3. If there is no such line, it is a standard rearview mirror. However, it can be upgraded to a "dual-curvature rearview mirror" by adding a "convex lens" to the mirror. This modification can also expand the rearward field of view, which is beneficial for reversing or observing traffic conditions behind the vehicle.
19
3
Share

How to Determine if the Car is in the Middle of the Road?

Determining if the car is in the middle of the road can be done using the following methods: 1. Using the driver's own body as a reference: The position of the left leg corresponds to the trajectory of the left front wheel, while the position aligned with the right leg is the centerline of the car body. Therefore, ensuring that the right leg frequently aligns with the centerline of the road while driving will keep the car centered on the road. 2. Using the lower edge of the car's front window as a reference: (1) The trajectory of the left wheel aligns with a point 10-15 cm inward from the left lower edge of the front window. (2) The trajectory of the right wheel aligns with the center position of the front window. Additional Tips: Drive the car onto the road and use the left edge, center, and right edge of the road as references. Park the car at each of these positions and note where the left edge, center, and right edge of the road fall on the lower edge of the front window. Memorize these positions. Due to differences in car models and driver heights, the exact positions may vary.
5
2
Share

How many kilometers is the break-in period for the Audi A6?

Audi A6 break-in period is 5000 kilometers, and the period before the first maintenance is considered the break-in period. Here is the speed introduction for the Audi A6 break-in period: 1. The first 500 kilometers is the initial break-in: At this stage, the speed should not be too fast, it should be below 70-80 kilometers per hour, and the engine speed should not exceed 2200 rpm. 2. 500-1000 kilometers is the mid-term break-in: The maximum speed can be appropriately increased to 90-100 kilometers per hour, with the engine speed still below 2500 rpm. Appropriately increasing the speed will not affect the engine but can promote the break-in process and check for any abnormalities during acceleration. 3. 1000-1500 kilometers is the late break-in: The speed can be increased to below 120 kilometers per hour. Since the break-in is a gradual process, it must be done step by step. The engine speed should not exceed 3000 rpm.
8
2
Share

How to Check Driver's License Number?

Traffic Management Bureau's violation inquiry provides functions for querying illegal vehicles and driver violations. The system will list all records of the user. The driver's license inquiry system collects and organizes authoritative nationwide motor vehicle driver's license number inquiries, as well as driver's license authenticity verification and driver point inquiries. The official driver's license platform is a professional verification platform for traffic violation inquiries, driver's licenses, motor vehicles, ID cards, and illegal information.
14
1
Share

How to check the reason for failing the third driving test?

You can check the reason for failing the third driving test at the examination hall. The third driving test mainly assesses road safety driving and safety awareness, and there are many possible reasons for failure. During the third driving test, wear thin-soled sports shoes, pay attention to traffic signals, yield to vehicles, pedestrians, and non-motorized vehicles, and frequently check the rearview mirrors.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.