What kind of driver's license is needed to drive a 7-seater car?

1 Answers
Lucas
07/29/25 4:59pm
To drive a 7-seater car, a C1 driver's license is required. Here are the specific details about the C1 driver's license: 1. Permitted vehicle types: The C1 driver's license is one of the codes for motor vehicle driver's licenses. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the C1 license allows the driving of small and mini passenger vehicles, light and mini cargo vehicles, light, small, and mini special operation vehicles, and small passenger vehicles with a seating capacity of 9 or fewer people. Based on these standards, a C1 license does not permit driving vehicles with more than 9 seats. 2. Examination subjects: The test includes four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving common sense.
Was this review help?
1
0
Share
More Forum Discussions

What are the maintenance items for BMW 320li at 100,000 kilometers?

BMW 320li 100,000 kilometers maintenance items are to replace the transmission oil tank. Transmission oil tank If the transmission oil is not regularly replaced, for the vehicle, during driving, the gears inside the transmission will operate at high speed and generate heat through friction. At this time, transmission oil is needed to lubricate and reduce the temperature, ensuring the normal operation of the vehicle, while also reducing oil loss under harsh operating conditions. Transmission maintenance: Regularly check whether the automatic transmission oil level is normal. Engine oil should be checked when the car is cold, while automatic transmission oil needs to be preheated to about 50°C. During normal use, the working temperature of automatic transmission oil is about 120°C, so high-quality automatic transmission oil should be selected.
3
2
Share

How Many Free Maintenance Services Come with a New Mercedes-Benz?

Mercedes-Benz offers one free maintenance service for new cars. Car Maintenance Cycle: The maintenance cycle for a new Mercedes-Benz is one year or 10,000 kilometers for engine oil changes. The first engine oil change for a new car should be done within one year or 8,000 kilometers. Brake fluid should be changed every 2 years, transmission oil and filter every 50,000 kilometers/3 years, spark plugs every 20,000 kilometers/3 years, cabin air filter every 20,000 kilometers/1 year, and front brake pads every 30,000-50,000 kilometers. Car Maintenance Items: Replace fuel filter and air filter, check clutch travel, inspect the lower control arm ball joint gap, tightness, and dust cover, check tire tread depth, tire pressure, and tire wear, inspect throttle body and idle air control valve for dirt and clean if necessary, check spark plug condition and replace if needed, clean fuel injectors without disassembly, inspect power steering, braking system, and automatic transmission condition, and test braking force, shifting, and steering for normal operation.
9
4
Share

What Causes the Rattle in the Front Passenger Airbag Cover of Baojun 510?

There are two main reasons for the rattle in the front passenger airbag cover of the Baojun 510: friction between plastic components and a faulty clock spring. Friction between plastic components: Due to road bumps, the vehicle body vibrates, causing internal plastic components to resonate and produce rattling noises or rub against each other, resulting in friction sounds. Faulty clock spring: The clock spring is the wiring harness that connects the main airbag to the airbag module. It is located directly beneath the airbag, under the steering wheel. The clock spring is wound around the steering column's rotating axis. If the clock spring breaks during winding or rotation, it can produce rattling noises.
10
5
Share

How to Replace Spark Plugs for Mercedes-Benz Vito?

Mercedes-Benz Vito spark plug replacement steps are as follows: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing, check for external debris like leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns before using the socket to tighten further. Reinstall the removed high-voltage distributor wires according to the firing order, then secure the cover. Spark plug replacement interval: Replace every 40,000 to 60,000 kilometers under normal maintenance conditions. However, this may vary depending on the brand and engine type, so always refer to the user manual. Maintenance replacement can be based on the following standards: Platinum spark plugs should be replaced at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km.
19
2
Share

What is the range of the Corolla hybrid battery in kilometers?

The range of the Corolla hybrid battery is approximately 9.5 kilometers. Powertrain: The Corolla is equipped with a 1.8L Atkinson cycle engine paired with an electric motor. The gasoline engine delivers a maximum power of 73kW, while the electric motor can output up to 53kW. The official combined fuel consumption is 4.2 liters per 100 kilometers, which is 1.7L lower than the minimum fuel consumption of the standard version. Features: The Corolla comes standard with LED headlights, a 4.2-inch LCD screen, paddle shifters, automatic air conditioning, vehicle stability control, airbags, an engine start-stop system, a rearview camera, keyless entry, front seat heating, navigation, and cruise control.
5
5
Share

What Causes the Timing Chain Noise in Geely Emgrand?

There are two main reasons for the timing chain noise in Geely Emgrand: one is timing chain wear, and the other is tensioner failure. Timing chain wear: The timing chain of the engine will wear out with use. Over time, gaps will appear, causing noise during operation. If not addressed promptly, it may lead to chain skipping, which can damage the engine. Therefore, it is recommended to replace it. Tensioner failure: Tensioner failure causes the timing chain to shake and produce impact noise. Worn tensioner pulley bearings or an overly tight tensioner can also result in timing chain noise.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.