What kind of car is the Qashqai?

How many reference points are there for reverse parking?

There are 4 reference points for reverse parking. Below is a detailed introduction about reverse parking for cars: Overview: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013, mainly assessing the driver's ability to operate the vehicle in a confined space. Reverse parking is one of the assessment points in the driver's test. It involves maneuvering the vehicle correctly into a garage from both sides while in motion. Others: The test area is 16 meters long and 6.83 meters wide. The garage is 5.25 meters long and 2.31 meters wide. Not following the prescribed route or sequence results in failure. Running over the line or failing to park properly results in failure. Exceeding 210 seconds to complete reverse parking results in failure. Stopping midway deducts 5 points each time.

14

2

Share

What are the penalties for not wearing a seatbelt in the back seat?

Whether there is a fine for not wearing a seatbelt in the back seat varies by city. Taking Shenzhen as an example, not wearing a seatbelt in the back seat in Shenzhen will result in a fine. Below is a detailed introduction about car seatbelts: Overview: Car seatbelts are safety devices designed to restrain passengers during a collision and prevent secondary collisions with the steering wheel, dashboard, etc., or to prevent passengers from being thrown out of the vehicle, which can cause fatalities or injuries. The fixing mechanism includes components such as the buckle, tongue, fixing pin, and fixing base. Others: Car seatbelts can also be referred to as seat belts and are a type of driver restraint device. Car seatbelts are recognized as the most cost-effective and efficient safety device. The material used is nylon webbing or high-strength polyester webbing.

9

2

Share

What are the consequences of not wearing a seatbelt in the passenger seat?

If the passenger does not wear a seatbelt, traffic police on duty can impose corresponding fines on the passenger. Below are the functions and performance requirements of seatbelts: Functions of seatbelts: Seatbelts serve to restrain movement and provide cushioning, absorbing impact energy and mitigating inertial forces, thereby preventing or reducing the severity of injuries to occupants. Car accident investigations show that in frontal collisions, wearing a seatbelt can reduce fatalities by 57%, by 44% in side collisions, and by 80% in rollovers. Performance requirements for seatbelts: For seatbelt assemblies used on single-seat chairs, including webbing, release devices, and other components, after being tightened according to specified test requirements, they must withstand a load of at least 6,672 newtons in the axial direction of the seatbelt. For seatbelt assemblies used on double-seat chairs, the rated strength should be at least 13,344 newtons. The rated strength of seatbelt assemblies is correspondingly marked on each half of the belt in every seatbelt assembly.

13

3

Share

What documents are required for vehicle scrapping?

Vehicle scrapping process: The car owner applying for scrapping and renewal must fill out the "Motor Vehicle Alteration, Transfer, Modification, Suspension, and Scrapping Approval Application Form" in duplicate and affix the owner's seal. Apply at the registration acceptance counter, where a "Vehicle Scrapping Notice" will be issued for vehicles that have reached the scrapping age limit. For vehicles that have not reached the scrapping age limit, after inspection and confirmation by the motor vehicle inspection counter that they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. The owner must choose a qualified recycling company to dismantle the vehicle, presenting the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must present the "Alteration Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates will be reclaimed, and the case will be submitted for approval according to regulations to complete the scrapping registration.

12

5

Share

Is it mandatory to carry a driver's license while driving?

It is required to carry a driver's license while driving. According to Articles 95 and 90 of the Road Traffic Safety Law, driving a motor vehicle without carrying a motor vehicle driver's license is considered a violation of the law. Article 19 of the Road Traffic Safety Law stipulates that a motor vehicle driver's license must be carried while driving. Below is relevant information about driver's licenses: Applying for a driver's license in a different location: It is possible to apply for a motor vehicle driver's license in a different location, but only for Class C motor vehicle driver's licenses. For other types of motor vehicle driver's licenses, applications must be made in the region of the applicant's household registration, and applications cannot be made elsewhere. The application for a motor vehicle driver's license is strictly controlled by age, so attention is required. Documents required for applying for a driver's license: The document needed to apply for a motor vehicle driver's license is an ID card. In case the ID card is lost, a temporary ID card can be obtained from the local public security authority, which can also be used to apply for a motor vehicle driver's license. Additionally, the document must be carried during subsequent exams; otherwise, the exam cannot be taken, which may delay the acquisition of the license.

19

1

Share

How many hours does it take to fully charge an electric vehicle?

It takes approximately 5-10 hours to fully charge an electric vehicle. When the charging indicator light changes from red to green, it indicates that the battery is fully charged. If time permits, it is advisable to continue charging for an additional 1-1.5 hours to allow the battery to absorb more energy. However, continuous charging should not exceed 12 hours, as it may cause battery deformation and damage. Battery maintenance tips: Fully charge before first use: Newly purchased electric vehicles should be fully charged before use. Many electric vehicles have been stored in shops for several months or even longer, so it is essential to charge them fully before initial use. After full charging, it is best not to use the vehicle immediately; let it sit for about ten minutes. Secure battery installation: When removing the battery for charging, ensure it is securely installed on the electric bicycle to prevent vibration damage during riding. Avoid dropping, rolling, or applying heavy pressure to the battery during transportation. Keep it clean: Maintain the battery in a dry and clean condition. Regularly remove dust and dirt from the battery cover and ensure the battery remains dry and clean to prevent self-discharge.

4

1

Share

What kind of car is the Qashqai?

How many reference points are there for reverse parking?

What are the penalties for not wearing a seatbelt in the back seat?

What are the consequences of not wearing a seatbelt in the passenger seat?

What documents are required for vehicle scrapping?

Is it mandatory to carry a driver's license while driving?

How many hours does it take to fully charge an electric vehicle?

Is it necessary to see the hood while driving?

What is the tire pressure for all four wheels of the BMW 730Li?

What procedures are required for taking Subject 4 exam in a different location?

How Many Times Can You Retake the Subject 3 Driving Test?