What kind of car is represented by a leopard?

Why is there water dripping from the Lingpai's exhaust pipe?

Water dripping from the Lingpai's exhaust pipe is a normal phenomenon, indicating that the fuel in the engine is burning relatively completely. The Lingpai is a compact 4-door, 5-seater sedan with the following body dimensions: length 4756mm, width 1804mm, height 1509mm, wheelbase 2730mm, and a fuel tank capacity of 40 liters. The Lingpai is equipped with a 1.5L engine and an eCVT continuously variable transmission, with a maximum power speed of 6000 rpm and a maximum torque speed of 5000 rpm. Its drivetrain is front-wheel drive, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

19

3

Share

How to Reset the Maintenance Light on a Chery Car?

To reset the maintenance light on a Chery car, follow these steps: 1. Insert the key and press the small button on the right; 2. Turn the key to the 'on' position; 3. Hold the small button for a few seconds, then release; 4. Press and hold the small button again, gently turn it to the right, then release to clear the maintenance reminder. Chery's vehicle lineup includes models such as the Tiggo 8, Tiggo 3x, Arrizo 5e, Tiggo 3xe, and Ant. For example, the Tiggo 8 is a mid-size 5-door, 5-seat SUV with dimensions of 4700mm in length, 1860mm in width, 1746mm in height, and a wheelbase of 2710mm.

10

4

Share

Why does the Mercedes-Benz B200 make a humming noise when running?

The abnormal noise from the Mercedes-Benz B200 while running is related to issues with engine oil, belts, and water temperature. Engine oil aspect: If the engine oil viscosity is too high, it can cause problems with engine operation, reduce lubrication effectiveness, and result in louder engine noise. It is essential to promptly visit a repair shop to check if the engine oil needs replacement. Belt aspect: Check if the belt is loose. A loose belt can lead to increased noise in the engine compartment. Water temperature aspect: Overheating can also cause abnormal engine noise. Check if the temperature gauge is normal and if there is any smoke coming from the engine compartment. Remember to replace the coolant before winter.

12

5

Share

How much oil does the Pajero consume?

Pajero's minimum fuel consumption is 9.63L, and the maximum fuel consumption is 15.59L. Correct time to check oil consumption: After the engine is turned off, let it sit for 15 minutes before checking. If you need to check frequently, you can check before starting the vehicle in the morning, when the oil level is most accurate. Before checking the dipstick, make sure all four wheels are on the same level surface, with no tilting front, back, left, or right. Function of the dipstick: To measure the static height of the oil level. It can reflect whether the engine oil level is within a reasonable range. A conventional dipstick will have upper and lower limits to ensure the oil level is between them. The middle position is best.

10

5

Share

Why do the taillights stay on after the car is turned off?

The reasons why the taillights stay on after the car is turned off are: 1. The car is not locked and is in standby mode, so the lights remain on for a while before automatically turning off; 2. There is a malfunction with the brake switch, in which case you should go to a 4S shop as soon as possible to replace the brake light. The taillights of a car are essentially the brake lights, usually red, designed to provide a highly penetrating light source so that even in low visibility conditions, the vehicle in front can be easily noticed when braking, preventing rear-end collisions. When the taillights are on, it indicates that the car is braking, and they usually turn off when the car is turned off. Car taillights include: turn signals, brake lights, position lights, rear fog lights, reverse lights, and parking lights.

6

4

Share

How to Check the Production Date of Car Glass and Tires?

To check the production date of car glass and tires, follow these methods: 1. The production date of car glass is indicated by small dots and numbers. The dots represent the production month, and the number represents the production year. If the dots are before the number, it means the production date is in the first half of the year. Subtract the number of dots from 7 to get the month. If the dots are after the number, it means the production date is in the second half of the year. Subtract the number of dots from 13 to get the month. 2. The outer side of car tires will have a DOT mark, and the last four digits of this mark indicate the production date of the tire. Some cars are special, such as BMW, whose glass does not have black dots. If you want to know the production date, you need to enter the serial code on the glass and check it on a specialized website.

16

1

Share

What kind of car is represented by a leopard?

Why is there water dripping from the Lingpai's exhaust pipe?

How to Reset the Maintenance Light on a Chery Car?

Why does the Mercedes-Benz B200 make a humming noise when running?

How much oil does the Pajero consume?

Why do the taillights stay on after the car is turned off?

How to Check the Production Date of Car Glass and Tires?

How to Adjust Direction When a Vehicle Experiences Side Slip?

How to Disassemble and Assemble a Mercedes Key?

Which country produces the Tank vehicle?

Causes of Slew Bearing Noise