What kind of car is Aston Martin?

What causes the low-speed jerking in the Tayron?

Tayron's low-speed jerking is caused by the significant difference in gear ratios when the upshift gearbox switches the reverse gear. The Tayron is equipped with a CUG 2.0T high-power engine and a DBF 2.0T low-power engine, paired with a 7-speed dual-clutch transmission. Below is an introduction to the Tayron: 1. Exterior: The Tayron is an SUV model under FAW-Volkswagen, based on the European version of the Tiguan and built on the Volkswagen MQB A2 platform. Exterior-wise, the Tayron adopts Volkswagen's new family-style design language, which has been gradually popularized across several new Volkswagen models. Compared to the previous Volkswagen family design, the Tayron appears more youthful and stylish. The front features a horizontal grille paired with LED headlights on both sides, effectively extending the horizontal visual width. The waistline stretches from the headlights to the taillights, and the rear design is rounded and bold, with robust lines throughout the body creating a muscular feel. 2. Features: In terms of features, besides conventional functions like 360° panoramic imaging, the third-generation intelligent parking assist system, and blind-spot detection, the Tayron is also equipped with the TJA Traffic Jam Assist system. By combining ACC 3.0 adaptive cruise control with Lane Assist lane keeping, it achieves L2-level autonomous driving, significantly reducing driver fatigue. The vehicle also comes with the 4MOTION intelligent all-wheel-drive system, offering four road modes, two off-road modes, and one snow mode for flexible switching.

15

3

Share

What are the dimensions of the TACQUA?

The length, width, and height of the TACQUA are 4194mm, 1760mm, and 1601mm respectively, with a wheelbase of 2651mm. Below are the specific details about the TACQUA: 1. Powertrain: The TACQUA offers young consumers two powertrain options: a 1.5L and a 1.4T. The 1.4T model delivers a maximum power of 110kW and a maximum torque of 250N·m. Particularly in S mode (Sport mode), the vehicle's power response becomes more aggressive, with direct feedback upon light throttle input. 2. Suspension: The inclusion of a high-ground-clearance suspension system and shock absorbers with a hydraulic rebound stop (HRS) provides strong support during every turn, easily handling impacts from various bumpy roads. Additionally, the TACQUA comes standard with extensive underbody protection, elevating the protection of the vehicle's chassis to a higher level.

1

5

Share

What Are the Reasons for the Engine Yellow Light?

The reasons for the engine yellow light are: 1. Sensor damage, poor contact, or signal interruption; 2. Poor engine maintenance; 3. Poor quality of fuel and engine oil; 4. Incomplete combustion of the air-fuel mixture; 5. Spark plug or ignition coil failure; 6. Fuel pump failure or fuel line blockage; 7. Air filter clogging. The solutions for the engine yellow light are: 1. Use fuel additives to clean the entire fuel system; 2. After cleaning the engine, use higher-grade gasoline; 3. Improve fuel cleanliness with high-quality fuel additives; 4. Replace the catalytic converter.

4

2

Share

What Does China 5 Represent in Automobiles?

China 5 represents the National Fifth Stage Emission Standard for Motor Vehicles, abbreviated as China 5 Emission Standard. The methods to check a vehicle's emission standard are: 1. Check the Motor Vehicle Conformity Certificate. When a car is manufactured, it comes with a conformity certificate that clearly states the vehicle's emission standard; 2. Refer to the vehicle's accompanying documents. The emission standard can be found in the vehicle information section; 3. Examine the Certificate of Conformity, which includes exhaust emissions and specifies the corresponding emission standard; 4. Visit the Motor Vehicle Environmental Protection Website for inquiry. Locate the public inquiry platform at the bottom of the homepage, enter the vehicle's VIN code and the last 6 digits of the engine number to retrieve the information; 5. Inspect the vehicle's environmental protection label. The back of the environmental protection label on the car's front windshield clearly indicates the vehicle's emission standard.

8

3

Share

What are the steps for vehicle painting?

Vehicle painting steps are: 1. Remove oil stains and rust from the body surface, degrease plastic surfaces, and keep the car surface clean; 2. Use zinc-based phosphating solution to phosphating the body surface, then rinse with clean water, wait for the body to dry before painting; 3. Pay attention to air pressure and nozzle size during spraying, ensure the car paint surface is even and smooth; 4. After painting, drive the vehicle into a paint baking room to dry quickly and solidify the paint. Methods for car paint maintenance include: 1. Wash the car after the engine has cooled down; 2. Reduce exposure to direct sunlight; 3. Clean stains on the body promptly; 4. Rinse with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze.

1

2

Share

What is the actual fuel consumption of the old BMW 745?

The average fuel consumption of the BMW 745 is 14.4 liters per 100 kilometers, but fuel consumption is related to many factors, so the specific actual fuel consumption should be based on actual usage. The main factors affecting fuel consumption are as follows: 1. Vehicle-related reasons: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once it is damaged, it will cause an imbalance in the fuel-air ratio, and fuel consumption will definitely increase suddenly. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas while the vehicle is in motion. Solution: Replace the oxygen sensor at an authorized 4S shop. Some car owners may try to save money by repairing it at a roadside stall, but after replacement, it must be tested again with a detector after the car is warmed up (the oxygen sensor works at high temperatures) to ensure there is a fluctuating signal output, which indicates a genuine part. Because when the vehicle is not running, the oxygen sensor does not function, and even if a fake part is installed, it cannot be directly read from the instrument panel. 2. The 'three filters' have not been replaced for a long time: During vehicle use, the three filters (oil filter, air filter, and fuel filter) must be replaced regularly. If they are not replaced for a long time, they will become dirty and affect performance, sending incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Solution: Regularly maintain the vehicle and replace the 'three filters' based on the mileage driven.

18

5

Share

What kind of car is Aston Martin?

What causes the low-speed jerking in the Tayron?

What are the dimensions of the TACQUA?

What Are the Reasons for the Engine Yellow Light?

What Does China 5 Represent in Automobiles?

What are the steps for vehicle painting?

What is the actual fuel consumption of the old BMW 745?

Can a 7-seater car be used for Didi?

How to Convert the Rear Seats of a Lavida into a Bed?

What is the meaning of the AMG logo on cars?

Can Didi book a 7-seater car?