···
Log in / Register

What kind of antifreeze does the Bora use?

4 Answers
AdalineAnn
07/28/25 5:36pm
The Bora uses Volkswagen's original antifreeze. The original antifreeze does not have a brand name labeled, it is only marked as Volkswagen-specific antifreeze. The original Volkswagen antifreeze is purple in color, with a freezing point below -35 degrees Celsius. It prevents corrosion of alloy components in the cooling system and the formation of scale, while also increasing the boiling point of the coolant. The Bora is a compact car produced by FAW-Volkswagen, with body dimensions of 4663 mm in length, 1815 mm in width, and 1462 mm in height, and a wheelbase of 2688 mm. In terms of power, the Bora is equipped with two engines: a 1.4-liter turbocharged engine and a 1.5-liter naturally aspirated engine.
Was this review help?
1
1
Share
DelLayla
08/11/25 9:42pm
I've been driving my Bora for several years and take the antifreeze matter seriously. Generally, I use Volkswagen G12 or G13 type, the red or purple one. Antifreeze not only prevents freezing but also boiling, protecting the radiator from rust. I change it every two years, buying the large container is cheaper, but always read the manual before DIY to avoid mistakes. Mixing different brands can cause problems, leading to pipe corrosion which is a big hassle. Regularly check the fluid level, and if it's below the min line, add some distilled water to dilute it. Weather changes also affect it; in winter, ensure the concentration is high enough to prevent freezing. Overall, taking good care of it makes the engine more durable. It's not expensive, but don't skimp on it to avoid doubling the repair costs.
Was this review help?
14
3
Share
Expand All
VanEmerson
09/30/25 2:22am
I just started learning to drive, and as a beginner with the Bora, safety is my top priority. I checked the manual about antifreeze, and it recommends using Volkswagen-specific types like G12. This stuff prevents freezing and overheating, and using the wrong type can damage the car. For beginners, it's best to go to a 4S shop or repair shop for a replacement—they know the right mixture to avoid mistakes. Learn to check the fluid level yourself; inspect the overflow tank when the car is cold, and don’t overfill it. From a safety perspective, don’t skimp by buying off-brand products—poor quality comes with high risks. Pay attention to seasonal changes: prevent boiling in summer and freezing in winter to protect your car’s lifespan. A little effort in simple maintenance goes a long way for peace of mind while driving.
Was this review help?
10
0
Share
Expand All
EvangelineFitz
11/13/25 4:14am
Save money with a Volkswagen-compatible coolant for your Bora. G12 specification is common among brands, affordable so don't waste. Choose cost-effective models, check online reviews for reliable products. Don't buy cheap inferior goods, wrong type may corrode the radiator costing more. DIY replacement saves labor costs, follow the manual step by step. Regularly check fluid levels to save money and hassle. Replace when color fades, typically every 2-3 years don't delay. Overall, choosing right products ensures long-term vehicle durability with lower expenses. Proper maintenance reduces failures, saving repair costs.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

What causes the steering wheel noise in Audi A4L?

Audi A4L steering wheel noise can have multiple causes, which need to be diagnosed based on the actual situation and sound type. Below are detailed explanations: Friction between plastic components: Especially in new cars, the steering wheel consists of various plastic parts. If the gaps between these parts are too small, friction may occur when turning the wheel. This usually resolves after a break-in period. If the noise persists, consider reassembling the steering wheel. Friction between steering column and floor mat: Oversized floor mats may directly contact the steering column, causing friction during rotation. Adjusting or replacing the floor mat can solve this issue. Clock spring failure in steering wheel: If the steering wheel has been disassembled, the clock spring (airbag spiral cable) might be broken or its connector unplugged. Replacement or reconnection is needed. Aging of tie rod end ball joint: Replace the tie rod end ball joint, but a wheel alignment is required after replacement. Steering gear failure: If there's particularly alarming noise from the steering wheel, it might be caused by excessive gear clearance in the steering gear. In this case, the steering gear needs replacement.
4
2
Share

Where to Place the Jack on Baojun 510?

Baojun 510's jack should be placed at the support points near the wheel edges on both sides of the vehicle chassis, which are designed for jack contact. The lifting part of the jack must be positioned on the chassis support points. Otherwise, it will be difficult to secure the vehicle, and it may cause damage to the jack or even the chassis. After lifting the vehicle, do not rush to remove the wheel hub screws; taking safety measures is the most important step. A jack is a lightweight lifting device that uses a rigid lifting component as the working mechanism to lift heavy objects within a small range through a top support or bottom claw. It is mainly used in factories, mines, and transportation sectors for vehicle repairs and other lifting or supporting tasks. Jacks have a wide range of applications, not only for cars but also for many industrial equipment that require such compact lifting devices. A common scenario for car jacks is tire replacement. Currently, mechanical and hydraulic jacks are widely used. The former is lightweight and portable, but due to its small size, its lifting capacity and stability are slightly weaker.
13
2
Share

What type of oil should be used for the eighth-generation Civic?

The 1.8L eighth-generation Civic should use semi-synthetic or higher-grade oil with the manufacturer-recommended viscosity of 5W-30. For the 1.5T engine, the manufacturer requires semi-synthetic or higher-grade oil with 0W-20/5W-30 viscosity. Method for changing the oil: Loosen the nut at the bottom of the transmission oil pan to allow the old transmission oil to drain naturally by gravity. Connect the transmission to a circulation machine via pipeline interfaces, and the new transmission oil will push out the old oil under pressure. Methods to determine if the oil needs to be changed: Pull out the oil dipstick and smell it closely. If there is a strong sour or foul odor, it indicates the oil has deteriorated and should be changed. Rub the extracted old oil repeatedly between your thumb and forefinger. If you feel impurities, poor viscosity, or even a gritty sensation, it should be changed. Hold the oil dipstick at a 45-degree angle under light and observe the oil droplets. If the droplets are clear without visible wear particles, the oil is in good condition. If there are many wear particles, the oil should be changed.
6
5
Share

Where to Connect the Negative Terminal for Jump-Starting a BMW 3 Series?

For the BMW 3 Series, the negative terminal is located behind the right front headlight. There is a metal post behind the headlight, which serves as the negative terminal for jump-starting. The positive terminal is near the right front suspension strut tower, covered by a red cap. Removing this cap reveals the positive terminal post. When replacing the car battery, always disconnect the negative terminal first, followed by the positive. To power off the vehicle, simply disconnect the negative terminal. When installing the battery, connect the positive terminal first, then the negative. For jump-starting a dead battery, first connect both vehicles' positive terminals, then the negative terminals. After starting the vehicle, disconnect the negative terminals first, followed by the positive. If the rescue vehicle's positive and negative terminals are connected first, the clamps on the ground may become tangled, leading to accidental contact between positive and negative clamps, causing a battery short circuit with severe consequences. If the jumper cables are the same color and the terminals cannot be distinguished, connecting positive to negative and negative to positive could result in a dangerous series short circuit between the two batteries. Exercise extreme caution during the operation. The car battery's negative terminal is connected to the chassis ground, meaning the car body acts as the negative terminal. After connecting both vehicles' negative terminals, connect the rescue vehicle's positive terminal first, then the dead vehicle's positive terminal. If the clamp accidentally touches a metal part of the car body, it would effectively connect both the rescue vehicle's positive and negative terminals to the dead vehicle's negative terminal, causing a short circuit in the rescue vehicle's battery.
13
5
Share

What are the differences between the second and third generation EA888 engines?

The differences between the second and third generation EA888 engines lie in the engine oil filler port: the oil filler port of the second-generation engine is located in the middle left position; the oil filler port of the third-generation engine is positioned at the rear left, behind the engine cover, and the engine cover of the third-generation engine is entirely black. An engine is a machine that converts other forms of energy into mechanical energy. Engines can refer to both the power-generating device and the entire machine including the power unit. Types of engines include internal combustion engines (gasoline engines), external combustion engines (Stirling engines, steam engines), gas turbines, and electric motors.
4
2
Share

When to Use Manual Mode in a Semi-Automatic Transmission?

Semi-automatic transmissions should be switched to manual mode in the following situations: 1. In shopping mall or underground parking garages, where the ramps are usually quite steep. If left in automatic mode, the transmission will upshift automatically, causing excessive wear. Switching to manual mode can prevent rolling back and provide more stable driving. 2. On mountain roads, manual mode helps effectively control vehicle speed to prevent accidents and avoids transmission overheating caused by frequent gear changes. The manual mode in semi-automatic transmissions differs from traditional manual transmissions. It typically features '+' and '-' signs, where '+' means upshift and '-' means downshift - simply push the lever up or down accordingly.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.