What items are required for the second car maintenance?

2 Answers
AlejandroMarie
07/28/25 8:01pm
The items required for the second maintenance include: replacing the engine oil and oil filter, replacing or cleaning the air and cabin air filters, and inspecting and maintaining dozens of items across multiple systems such as the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tires. Precautions for car maintenance are as follows: 1. Regularly check whether antifreeze, brake fluid, windshield washer fluid, etc. are sufficient. Antifreeze ensures normal driving in winter and prevents freezing. Brake fluid is an essential component of the braking system. Windshield washer fluid is used to clean the windshield. All these must be kept at adequate levels to ensure the vehicle operates properly. 2. Perform wheel alignment regularly. 3. Regularly inspect the brake pads. Check the wear level of the brake pads and clutch plates periodically. When driving on the road, the brake pads and clutch plates are constantly wearing out. They need to be replaced once they reach a certain level of wear; otherwise, there will be significant safety hazards.
Was this review help?
18
3
Share
LePhoebe
08/12/25 12:50am
During my last second car maintenance service, there were quite a few items to address. First and foremost, changing the engine oil and oil filter is mandatory, otherwise it could shorten the engine's lifespan. Checking the air filter is also crucial, as a dirty one affects air intake and fuel consumption. The tires needed rotation to ensure even wear. Don't forget the brake system test – it's a major safety concern. Lights and wipers should be checked for proper functioning. Additionally, some vehicles require chassis or battery connection inspections – don't overlook these. My tip: bring your car manual and communicate thoroughly with the technician; it can save money and give peace of mind. The whole process took me about an hour. Costs vary by brand, typically ranging from a few hundred to a thousand yuan – remember to book in advance to avoid queues. Regular maintenance definitely extends your car's lifespan; don't wait for a breakdown to regret it.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What are the practical features of the Toyota Allion?

Toyota Allion's practical features include the Toyota Safety Sense (TSS) intelligent safety system, Lane Tracing Assist (LTA), Automatic High Beam (AHB), and Dynamic Radar Cruise Control (DRCC). Vehicle dimensions: Positioned as an A+ class sedan, it measures 4720×1780×1435mm with a wheelbase of 2750mm. Powertrain: Equipped with a TNGA 2.0L Dynamic Force Engine delivering maximum power of 126kW at 6600rpm and peak torque of 205Nm between 4600-5000rpm, paired with a 10-speed Direct Shift-CVT transmission (10-speed dual transmission CVT).
7
4
Share

What is the normal intake pressure for Peugeot 307?

The normal intake pressure range for Peugeot 307 is between 40-80KPA. Intake pressure refers to the average absolute pressure in front of the intake valve during the engine cylinder's intake process. The intake pressure sensor, abbreviated as MAP (Manifold Absolute Pressure Sensor), is connected to the intake manifold via a vacuum tube. It senses the vacuum changes in the intake manifold as the engine's speed and load vary, then converts the internal resistance changes of the sensor into voltage signals for the ECU to adjust fuel injection and ignition timing. The main parameters of the intake pipe affecting engine intake performance are summarized as follows: intake pipe inlet diameter, intake manifold diameter, intake manifold length, and plenum chamber volume. Intake pipe inlet diameter: Determines the total intake volume and is set based on the throttle diameter. Intake manifold diameter: Determines the intake volume per cylinder and is set based on the intake port entrance diameter. Intake manifold length: Affects the dynamic effect. In intake pipe optimization calculations, this is treated as a target parameter for optimization. Plenum chamber volume: Affects the pulsation (resonance) effect. An appropriate plenum chamber volume not only enhances charging efficiency by utilizing the pulsation effect but also maintains a relatively stable pressure environment in the plenum chamber, providing favorable conditions for leveraging dynamic effects while eliminating interference between cylinders and improving intake uniformity.
18
3
Share

Where is the tow hook on the Changan CS55?

The installation position of the tow hook on the Changan CS55 is under the vehicle's bumper. The tow hook, also known as a car tow hitch, is used for towing purposes and serves as the vehicle's towing and traction device. It consists of an installation bracket, a ball-type tow hook, and a towing power module. How to use the tow hook: Locate the towing hitch positions at the rear of the towing vehicle and the front of the towed vehicle; after removing the cover on the bumper, assemble the included hitch; install the towing tool; the towing vehicle should start in 1st gear to ensure sufficient torque for adequate traction. Installation method for the car tow hook: Use a screwdriver to gently pry open the small square module and remove the cover; screw the tow hook clockwise onto the small module until it can no longer turn, indicating successful installation. Towing precautions: If the towed vehicle has brake issues or towing is required on icy roads, a tow bar should be prioritized; ensure the tow hook is securely fastened and properly installed, double-checking its stability before towing; plan the route carefully; choose a towing route with less traffic, better road conditions, and a shorter distance; avoid hazardous sections such as crowded areas, logistics centers, commercial districts, underground parking lots, etc., to reduce the risk of secondary accidents.
13
2
Share

Is Honda Engine the Best in the World?

Honda engine is the best in the world. Here is an introduction to Honda engines: Since Honda was founded in 1948, Honda's engine technology has indeed been at the forefront of the global engine field, covering 1.5L, 1.8L, 1.0T, 1.5T, 2.0L displacements, among others. The most classic is the 1.5L engine, which can produce 131 horsepower. The most famous engine technology is the "VTEC system" (Variable Valve Timing and Lift Electronic Control System). The "Earth Dreams" technology configuration includes: VTEC variable valve lift, variable intake manifold, VCM variable cylinder management, turbocharging, and more, earning countless praises. Consumers often joke that it's "buying an engine and getting a car for free."
15
2
Share

How to Install One-Key Start for Motorcycles?

First, check the constant power. With the mechanical key in the off position, locate the wire in the original ignition switch that has power, then directly connect it to the constant power wire of the one-key start system. Turn the mechanical key to the NO position, ensuring the entire vehicle is powered on. The wire in the original ignition switch without power is the starter motor wire, which should be connected to the one-key start system.
17
4
Share

Is the Focus Dual Clutch Really That Bad?

Ford Focus dual-clutch transmissions have a relatively high failure rate. Introduction to the Focus: The Focus is a Ford A-segment family sedan. It is equipped with an inline four-cylinder Duratec-HE reverse-mounted aluminum alloy engine, which is cast entirely from aluminum alloy and features a reverse-mounted design. The maximum power output is 104 kW, and the maximum torque is 180 N·m. Introduction to the Focus Dual Clutch: The Focus dual-clutch transmission is sourced from Germany's Getrag. It is a dry dual-clutch transmission that is prone to overheating during frequent gear shifts. The prolonged semi-engaged state in stop-and-go traffic can lead to risks of overheating, jerking, and oil leakage.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.