What items are required for the first maintenance?

What are the precautions for a new car?

Here are some precautions for a new car: Check the vehicle documents: Purchase invoice; vehicle certificate; three-guarantee service card; vehicle user manual; check the nameplate: verify the displacement, manufacturing date, chassis number, engine number, etc. on the nameplate. The numbers on the certificate must match the engine number and chassis number on the car. Interior inspection: Check the cleanliness of all areas inside the car. There should be no dirt, especially in corners and other areas; the seat surfaces should be clean and intact, and they should be comfortable to sit on without feeling any foreign objects inside that might affect comfort; check if all parts of the center console are complete, if the buttons are reliable, and if the surfaces are clean without scratches or stains. If there are sun visors and vanity mirrors, check them as well; inspect the cleanliness of every storage space inside the car and the reliability of opening and closing them.

16

1

Share

Why Does the Motorcycle Foot Peg Get Stuck?

The motorcycle foot peg may get stuck due to engine seizure from overheating or damage to other internal engine components. Engine seizure from overheating: Piston rings and engine cylinder walls can experience catastrophic failure. Lack of engine oil lubrication causes excessive cylinder heat, melting the piston rings and fusing them with the cylinder wall. This requires replacement of the cylinder kit for resolution. Damage to other engine components: 1. Generator coil failure - Loose rotor fasteners may cause the rotor and stator to become jammed by the screws, preventing rotation and engine starting. Solution: Replace generator coils and fasteners. 2. Clutch disintegration - Excessive clutch wear thins the housing, leading to breakage. The broken pieces can jam the crankshaft, preventing engine operation. Solution: Replace the complete clutch assembly.

7

1

Share

What are the reasons for the failure to connect to the New Baojun Bluetooth key?

New Baojun Bluetooth key may fail to connect due to reasons such as Bluetooth being in an invisible state, excessive distance between Bluetooth devices, changed Bluetooth name, or hardware issues. Bluetooth invisible state: If the car Bluetooth or mobile phone Bluetooth is in an invisible state, neither party will be able to scan the other, making it impossible to perform connection and pairing operations. Excessive distance between Bluetooth devices: Since Bluetooth transmission has a certain distance limitation, when the mobile phone Bluetooth and car Bluetooth are too far apart, the Bluetooth device may not be detected. Even if detected, the excessive distance may affect the connection. Changed Bluetooth name: If the Bluetooth name is changed, the previously saved old Bluetooth name device will not be able to connect, but the new Bluetooth device name can still be searched for in other Bluetooth devices. Hardware issues: Although the possibility of hardware issues is relatively small, if none of the above assumptions are problematic, the possibility of hardware issues cannot be ruled out.

14

4

Share

Should the Tayron use 5W-30 or 5W-40 engine oil?

The Tayron should use 5W-40 engine oil. Differences between 5W-30 and 5W-40 engine oil: 5W-40 offers better oil stability than 5W-30 under extremely high-temperature conditions in the engine. For older vehicles, using 5W-30 oil may result in slightly louder engine noise compared to 5W-40. For oils of the same quality grade, 5W-30 has better fluidity than 5W-40, which helps reduce fuel consumption and dissipate engine heat more quickly (low-viscosity oils have better fluidity than high-viscosity oils). For engines that strictly require 5W-40, using 5W-30 may lead to higher-than-normal oil consumption (commonly known as "burning oil"). Meaning of engine oil grades: These indicate the viscosity and quality of the oil. Gasoline engine oil quality grades are classified as: SA, SB, SC, SE, SF, SG, SH, SJ, SL, SM, with quality increasing from left to right. The "S" stands for gasoline engine oil, and the following letters represent the grade. Low-temperature viscosity grades are: 0W, 5W, 10W, 15W, 20W, 25W, with smaller numbers indicating better cold-start performance. "W" stands for "winter," indicating low-temperature performance. For example, 0W oil freezes at -35°C, while 5W oil freezes at -30°C.

3

1

Share

What causes the instrument display system failure in Audi A8?

Here are the reasons for the instrument display system failure in Audi A8: Severe brake pad wear: It may be due to severe brake pad wear. When brake pads with sensor wires wear to the limit position, the sensor wire will automatically connect the circuit, triggering the fault light. Low brake fluid level: It could be caused by insufficient brake fluid. Brake fluid plays a crucial role in the vehicle's braking system. When the driver presses the brake pedal, the force is transmitted by the piston in the master cylinder through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle. Insufficient brake fluid is often accompanied by noticeably reduced braking power, and in severe cases, complete loss of braking may occur. This issue can be resolved by promptly replenishing the brake fluid. Failure to meet combustion conditions: If the basic conditions for proper combustion are not met, driving performance issues may arise. Compression pressure is one of these basic conditions. Compression pressure is related to the amount of air-fuel mixture in the cylinder and the piston stroke. These operations are fundamental engine functions, and abnormal compression pressure can lead to driving performance problems.

14

1

Share

Can a New Car Be Driven on Mountain Roads During the Break-in Period?

A new car during its break-in period can be driven on well-paved mountain roads, but it is advisable to avoid poorly maintained roads. Warm-up: During a cold start, it is best to wait until the engine coolant temperature reaches above 40 degrees Celsius before moving. Start gently by slowly releasing the clutch and gradually pressing the accelerator pedal, and choose smooth roads for driving. Avoid revving the engine when parking. Speed Control: During the break-in period, it is crucial to control the driving speed—avoid excessively high speeds, preferably keeping it between 50 to 80 km/h. After driving 1,500 kilometers, you can gradually increase the engine speed and vehicle speed to the maximum allowed by the car. Avoid harsh acceleration to ensure that pistons, cylinders, and other critical components increase their load under moderate conditions. Frequent Gear Shifts: Avoid using a single gear for extended periods. Start in a low gear and progressively shift to higher gears, driving in a step-by-step manner. Be sure to avoid scenarios like high speed in low gear or low speed in high gear.

11

2

Share

What items are required for the first maintenance?

What are the precautions for a new car?

Why Does the Motorcycle Foot Peg Get Stuck?

What are the reasons for the failure to connect to the New Baojun Bluetooth key?

Should the Tayron use 5W-30 or 5W-40 engine oil?

What causes the instrument display system failure in Audi A8?

Can a New Car Be Driven on Mountain Roads During the Break-in Period?

Where is the headlight control module located in the Mercedes ML350?

Does 84 Disinfectant Affect Car Paint?

How many questions are there in the motorcycle test?

How many times does the Audi A6 key light flash when pressed once?