What items are required for a 20,000-kilometer car maintenance?

1 Answers
DeDominic
07/29/25 11:47am
Car maintenance items required at 20,000 kilometers are as follows: 1. Engine oil and oil filter: The maintenance of engine oil and oil filter is something almost everyone knows, as these are nearly mandatory items for every maintenance session. Engine oil generally serves functions such as lubrication, cooling, and rust prevention. Over time, its quality deteriorates, which can increase engine wear. The oil filter is primarily used to filter out impurities in the oil. Not replacing it for a long time can lead to a decline in filtration performance, thereby reducing the engine's lifespan. Therefore, replacing the engine oil and oil filter is almost an essential part of every car's maintenance. 2. Air filter: The air filter is a maintenance item that many car owners often overlook, thinking it has little effect and that replacement is optional. However, this is incorrect. The air filter acts like a human respiratory filtration system. If it becomes too dirty, foreign particles can enter the combustion chamber, increasing engine wear. Its replacement cycle is generally around 7,500–10,000 km. Additionally, using a high-pressure air gun to clean the air filter is not recommended because the filter relies on surface fibers to trap dust and other particles, and the high-pressure air gun can damage these fibers, reducing its filtration efficiency.
Was this review help?
9
3
Share
More Forum Discussions

How Often Should the Transmission Filter Be Replaced?

Automatic transmission fluid should be replaced every two years or approximately every 40,000-60,000 kilometers, while manual transmission fluid should be replaced every three years or every 60,000-80,000 kilometers. The transmission filter should be replaced along with the transmission fluid. Here is some relevant information about transmission filters: 1. Function: Cleaning, removing impurities, and separating contaminants. During the operation of an automatic transmission, metal shavings, fibers, and sludge gradually formed from prolonged use of transmission fluid can mix in. The filter can separate these liquid and solid substances under extreme temperature changes, ensuring the normal operation of the transmission. 2. During prolonged operation, the transmission inevitably produces sludge or other metal impurities. If not replaced for an extended period, excessive impurities may accumulate on the filter surface, reducing its transmission efficiency and potentially leading to transmission failure.
3
4
Share

Are car coolant and antifreeze the same thing?

Car coolant and antifreeze are not the same thing. The differences are as follows: 1. Coolant is not only used in winter but is required throughout the year. Whether in extreme heat or cold, a car cannot function without coolant. Proper use of coolant not only protects the engine's cooling system and improves heat dissipation but also enhances engine efficiency and extends its lifespan. 2. The full name of antifreeze should be antifreeze coolant, meaning it is a coolant with antifreeze properties. Antifreeze prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head during cold winter parking. 3. Antifreeze is not entirely equivalent to coolant. Coolant is equal to water plus antifreeze. In simpler terms, coolant refers to any liquid that can cool the engine, which can be either water or antifreeze. Water is a very low-grade coolant and is also limited by seasonal constraints.
11
0
Share

How to Avoid Stalling on a Hill Start?

Here are two techniques to prevent stalling during a hill start: 1. Slowly Release the Clutch: When releasing the clutch, do it gradually and avoid rushing. Once the car noticeably vibrates, release the brake. If the car hasn't started moving after fully releasing the brake, then slowly release the clutch completely, allowing the car to move normally. 2. Apply Throttle During Hill Start: If you don't press the accelerator slightly while starting on a hill, the engine might not have enough idle speed to move the car, causing it to stall. Reasons for Stalling During Hill Start: Releasing the clutch too quickly can cause the car to stall. On a hill, maintain steady control of the clutch and avoid rushing to release it. Carefully find the clutch's engagement point, also known as the 'half-clutch' position, where the car remains stationary—neither rolling backward nor moving forward. Some cars may also experience slight vibrations in this position.
1
3
Share

What does the 'a' below the electronic handbrake mean?

a stands for the Auto Hold system. Below is an introduction to the Auto Hold system: 1. The Auto Hold system (AUTOHOLD) is a technology application that enables automatic handbrake functionality while the car is in operation. This technology allows drivers to avoid prolonged braking when the vehicle comes to a stop and prevents unnecessary rolling when the automatic electronic parking brake is engaged. 2. The working principle of the Auto Hold system lies in the brake management system's control of the four-wheel brakes through the extended functionality of the electronic parking brake (EPB). In other words, the Auto Hold system is an extension of the electronic parking brake (EPB) and is controlled by the ESP component.
7
4
Share

Which engine oil is suitable for Civic?

Honda Civic can use 0W20 engine oil, which is designed to improve fuel economy. The number 0 represents the viscosity of the oil, with 0 being the smallest, indicating lower viscosity at low temperatures and better fluidity in cold conditions; W stands for winter-grade oil; 20 is the oil viscosity, where a smaller number like 20 is suitable for low-temperature use. The higher the number, the higher the temperature range the oil is designed for. Choosing the right oil depends on the operating temperature of the vehicle. Engine oils are classified as follows: High-temperature type (e.g., SAE20-SAE50): The number indicates the viscosity at 100 degrees, with higher numbers representing higher viscosity. Low-temperature type (e.g., SAE0W-SAE25W): W indicates winter use only, and the smaller the number, the lower the viscosity and the better the low-temperature fluidity. All-season type (e.g., SAE15W/40, 10W/40, 5W/50): Indicates that the viscosity grade at low temperatures meets the requirements of SAE15W, 10W, and 5W, respectively, while the high-temperature viscosity grade meets the requirements of SAE40 and 50, making it suitable for both winter and summer use.
2
4
Share

What does 280TGDI mean?

This is the rear emblem of a car. S5 stands for the 'model', 280 represents 'peak torque', and TGDI is the English abbreviation for the engine's highlight technologies, where T stands for turbocharging and GDI stands for gasoline direct injection technology. To put it in simpler terms, it refers to a turbocharged gasoline direct injection engine. Below is an introduction to TGDI: 1. As the most advanced powertrain system currently available, the TGDI engine combines cutting-edge technologies such as turbocharged intercooled TCI and gasoline direct injection GDI, offering numerous advantages including strong power and fuel economy. 2. This technology has now been widely adopted, with international automakers like Mercedes-Benz, BMW, General Motors, and Honda considering TGDI technology as a key competitive advantage in the future automotive market, investing in its development and utilization. 3. TGDI technology has also become an involuntary benchmark for measuring the technical level and R&D capabilities of international automotive companies.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.