What items are included in the second maintenance of a vehicle?

1 Answers
CodyFitz
07/29/25 11:04pm
Here are the specific maintenance tasks for the second maintenance of a car: 1. Engine maintenance: Replace engine oil, oil filter, and air filter. Check the tightness and rotation speed of the engine belt, as well as the condition of various fluids. 2. Tire maintenance: Check tire pressure, and look for bulges, damage, or uneven wear (such as misalignment or tread wear). 3. Maintenance of car wear parts: Inspect the chassis, brake pads, brake discs, ball joints, CV joints, and connecting rods for any scratches or damage. 4. Lighting and wiring maintenance: Check all lights and switches in the vehicle to ensure they are functioning properly.
Was this review help?
1
2
Share
More Forum Discussions

What is the standard size of a parallel parking space?

According to the relevant regulations of the "Specifications for the Setting of Motor Vehicle Driver Examination Sites and Their Facilities," the standard dimensions for a parallel parking space are as follows: For large vehicles, the parking space width is 4 meters, and the length ranges from 7 to 10 meters, depending on the vehicle model. For small vehicles, the parking space width is between 2.2 and 2.5 meters, with a length of 5 meters. A single-sided parking space is 5 meters wide, while a double-sided one is 6 meters, and for large vehicles, it is 8 meters. Below is an introduction to relevant parking techniques: 1. Observation: Before parking, check if the space can accommodate your vehicle and then consider parking. Forcing a vehicle into a smaller space is possible but requires multiple adjustments, which not only wastes time but also increases the risk of scratches. 2. Parking: Drive your car to the left front of the parking space, maintaining a horizontal distance of about 1 meter from the car in front. Adjust the distance, align the center of your car's right window with the center of the car in front, and then turn the steering wheel fully to the right to start reversing. 3. Adjustment: Finally, when the right rearview mirror overlaps with the B-pillar (the center point of the side of a large vehicle) of the car in front, the vehicle will be at approximately a 45-degree angle. At this point, straighten the wheels and slowly reverse. When the outer edge of the right rearview mirror aligns with the left rear taillight of the car in front, stop reversing and turn the steering wheel fully to the left to continue reversing slowly. If the car body appears slightly tilted, make gradual adjustments.
9
1
Share

How to Solve the Sunroof Noise Issue in Mistra?

The solution to the sunroof noise issue in Mistra is to first check the sunroof sliding rail and add some lubricating oil. Below are the causes and solutions for sunroof noise: 1. Aging of the sealing rubber ring: The sunroof sealing rubber strip is exposed to rain or sunlight for a long time, making it prone to aging. Rubber conditioner can temporarily restore the performance of the rubber strip. Open the sunroof fully and spray the conditioner onto the sealing rubber strip. 2. Loose sunroof screws: Loose screws can cause ceiling noise and sunroof noise, and even pose a risk of the sunroof falling off. The solution is simple: locate the sunroof screws and tighten them. You can use a towel to remove dust, and regular maintenance is very important.
20
5
Share

Why Does the Engine Make Loud Noises When Cold?

Engine cold start loud noise reasons are: Engine oil does not meet standards or excessive amount is added, increasing the stirring resistance of the crankshaft connecting rod; unsuitable oil viscosity; excessive engine carbon deposits, aggravating cylinder and piston wear; mixing different brands of engine oil; failure to change oil on time. Solutions for engine cold start loud noises are: Refer to the maintenance manual or driving environment and frequency to change oil regularly; use the same brand or same grade of engine oil; clean the three-way catalytic converter and throttle carbon deposits; add the gasoline grade recommended in the vehicle manual. Hazards of an excessively cold engine include: The temperature of the mixture entering the cylinder is too low, deteriorating the quality of the combustible mixture, making ignition difficult or combustion slow, leading to reduced engine power; unvaporized fuel washes away and dilutes the oil film on the surface of parts, accelerating part wear.
10
0
Share

Can Traffic Violations Be Checked with a VIN?

Traffic violations cannot be checked with a VIN. Ways to check and handle traffic violations include: The most direct method is to visit the office halls of traffic branches in various cities, districts, and counties for inquiries; Log in to the websites of the local public security traffic management bureau, enter the license plate number and the last 4 digits of the engine number or the last 6 digits of the VIN to check; Call 12580, 122, or the local 114 for inquiries; Subscribe to or send mobile text messages to check vehicle violations. Introduction to VIN: The Vehicle Identification Number, abbreviated as VIN, is a unique set of seventeen letters or numbers used on automobiles to identify the manufacturer, engine, chassis number, and other performance data of the vehicle.
4
4
Share

What is the issue when the new energy power fault light keeps displaying?

The reasons for the new energy power fault light to illuminate include faults in individual cells within the battery pack, motor controller faults, motor faults, etc. To further determine the fault point, it is necessary to use a diagnostic tool compatible with this electric vehicle for diagnosis, locate the module reporting the fault, and read the data stream to identify the fault cause for resolution. Low Battery Warning Light: This fault light is actually a warning light, serving the same purpose as the fuel warning light in conventional vehicles, reminding the user to recharge. Some electric vehicles with LCD screens will display on the screen: "Please charge in time!" Power Battery Internal Fault Light: This fault light indicates that the fault point is the battery pack. When this fault light is on, in most cases, the vehicle's high voltage is disconnected, and the vehicle cannot drive. In a few cases, the vehicle can drive slowly but cannot accelerate.
15
0
Share

Where is the fog light switch located in the car?

The car fog light switch is located either on the light control lever behind the steering wheel or on the light control knob on the panel in front of the driver's left leg. Here are the specific details: 1. Description of the fog light switch on the light control lever: To use the fog lights, turn the middle part of the light control lever toward the instrument panel once for the front fog lights and twice for the rear fog lights. 2. Description of the fog light switch on the light control knob: The control knob is more convenient and easier to operate. To turn on the fog lights, pull the light control knob outward once for the front fog lights and twice for the rear fog lights. 3. Symbols for car fog lights: The symbol for the front fog light is a light bulb with three downward-slanting lines on the left; the symbol for the rear fog light is also a light bulb with three horizontal lines on the right.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.