What items are included in the second maintenance?

1 Answers
AliceLee
07/29/25 2:26pm
The second maintenance for a car includes changing the engine oil, air conditioning filter, oil filter, air filter, as well as inspecting the engine and tire conditions. Additionally, a comprehensive cleaning of the vehicle will be performed. Below is a detailed explanation: 1. Changing the engine oil and filter: The second maintenance will definitely involve changing the engine oil. The oil typically replaced by 4S shops is semi-synthetic, which is of lower quality compared to fully synthetic oil. If desired, you can request fully synthetic oil, though this will require an additional cost. Along with the oil change, the condition of the oil filter will also be checked, and it will be replaced if necessary. 2. Inspecting the engine and other components: The second maintenance will also include checking the engine's working condition, such as whether the pipe connections are normal, if there are any leaks, if the engine sounds normal, or if there are any unusual noises. Furthermore, the vehicle will be lifted to inspect the undercarriage for any scratches or corrosion, as well as to check the braking system, suspension system, and the inner side of the tires to ensure safety for future use.
Was this review help?
19
0
Share
More Forum Discussions

What does it mean when the car shows an ESP malfunction?

The reason why the car cannot start and shows an ESP malfunction is due to a fault in the vehicle's Electronic Stability Program (ESP) system. If the car's ESP system is malfunctioning, it is necessary to promptly visit a car 4S shop or a repair shop to have the ESP system inspected and repaired, which will resolve the issue of the car not starting. Below are detailed explanations about it: 1. Explanation one: If the ESP light comes on while driving, it is necessary to reduce the driving speed, avoid excessive steering and turning, and find a nearby 4S shop as soon as possible to check the cause. 2. Explanation two: When emergency avoidance is required, the ESP intervenes to increase the driving force of the drive wheels; when there is a tendency for the car to fishtail, the ESP will apply braking to the opposite wheel to reduce rotation, thereby helping the vehicle follow the driver's steering intentions.
20
5
Share

What is the reason for noticeable car shaking above 110 km/h?

The reason for noticeable car shaking above 110 km/h is that severe carbon deposits can cause spark plug blockage and valve blockage. There are three vehicle maintenance methods: 1. When starting: Pay attention to letting the vehicle idle for one and a half minutes when starting a cold car, allowing the vehicle to have a warm-up period. When just starting, the internal temperature of the engine does not reach the normal operating temperature. The water temperature gauge should point to 90 degrees as normal, and the car may shake with loud engine noise; 2. Do not drag the gear while driving: When the engine shakes, the gear should be shifted down in time. Dragging the gear will cause the engine to bear excessive pressure, insufficient power, incomplete combustion of gasoline, and carbon deposits in the nozzle will affect the service life of the engine; 3. Protection of the chassis: The chassis is the part of the car body closest to the ground and is also very susceptible to damage from ground objects while driving. Therefore, the chassis should be checked frequently to avoid excessive damage from foreign objects.
10
5
Share

Why does the car air conditioner not cool when running but cools when parked?

If the car air conditioner does not cool when running but cools when parked, the reasons are as follows: 1. Lack of Freon: The lower engine speed causes the compressor speed to be relatively lower, and the lack of Freon means the instantaneous pressure boost does not reach the standard state, resulting in low high pressure and suboptimal cooling performance. 2. Compressor pressure leakage: This directly leads to severely low pressure during idle. 3. Air conditioner cooling fan not working: When parked, due to insufficient cooling and the absence of wind speed during driving to lower the temperature, the pressure becomes excessively high, causing the high-pressure sensor to force the compressor to stop working, thus resulting in no cool air.
10
0
Share

What Causes the Screeching Metal Friction Sound from the Front Wheels?

The screeching metal friction sound from the front wheels can be caused by foreign objects between the brake disc and brake pads, a damaged brake separation pump, or excessive wear of the brake pads. Details are as follows: Foreign objects between the brake disc and brake pads: Check if there are any wire-like objects entangled around the wheel or the nearby drive half-shaft. Damaged brake separation pump: If the vehicle is not regularly maintained, it can lead to wear of the brake caliper's moving pins, detachment of spring plates, and other issues. Poor caliper resetting can cause prolonged friction of the disc, resulting in abnormal noise. Additionally, check if the brake disc has grooves, as localized friction can also cause noise. Excessive wear of the brake pads: Inaccurate four-wheel alignment can cause significant tire wear during long-distance driving, leading to uneven tire wear and abnormal noise.
9
0
Share

What causes the air conditioning to stop cooling after a vehicle goes through water?

The reasons why the air conditioning stops cooling after a vehicle goes through water are as follows: 1. Air entering the vehicle's air conditioning system: This can cause excessive pressure in the refrigeration pipes or form ice blockages, leading to poor refrigerant circulation and resulting in no cooling. 2. Loose drive belt of the air conditioning compressor: During compressor operation, this can cause slipping, reducing transmission efficiency, slowing down the compressor speed, and causing compressor wear or valve leakage, which decreases the delivery of compressed refrigerant and directly reduces the cooling capacity of the air conditioning system or stops cooling altogether. 3. Low power supply or voltage: The electromagnetic clutch of the compressor will have reduced suction, and oil contamination between the clutch pressure plate and the pulley may occur, leading to a 'slipping' condition similar to a loose drive belt.
2
2
Share

What is the width of a car?

Generally, a sedan is about 4.8 meters in length and 1.8 meters in width. Below are detailed introductions about it: 1. Introduction 1: Vehicle dimensions refer to the regulatory limits on the total height, total width, and total length of a car. 2. Introduction 2: The width of a car refers to the distance between two planes parallel to the longitudinal symmetry plane of the vehicle and touching the outermost rigid fixed protrusions on both sides of the vehicle (excluding rearview mirrors, side marker lights, position lights, turn indicators, etc.). 3. Introduction 3: The length of a car refers to the distance between two vertical planes perpendicular to the longitudinal symmetry plane of the vehicle and touching the outermost front and rear protrusions of the vehicle.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.