What items are included in the first maintenance of the Nissan New Sylphy?

1 Answers
VonLeo
07/30/25 12:34am
Nissan New Sylphy's first maintenance mainly involves changing the engine oil and oil filter. The first maintenance cycle is 5,000 kilometers or three months, whichever comes first. There are two indicators for a car's maintenance cycle: one is the time indicator, and the other is the mileage indicator. The first maintenance cycle should be determined based on these two indicators. The New Sylphy is a family sedan under Dongfeng Nissan, which has won consumers' favor with its rich configurations and outstanding cost performance. Dongfeng Nissan launched the newly redesigned New Sylphy, which, as a strategic global model of Nissan, has its predecessor as the first-generation luxury sedan in China, the "Bluebird," renowned for its excellent product performance and noble driving experience.
Was this review help?
9
2
Share
More Forum Discussions

What brand are the tires on the Kia K3?

The original tires of the Kia K3 are equipped with brands such as Kumho, Nexen, and Hankook, which are randomly assembled by the manufacturer. Here is an extended introduction: 1. Factors to consider when purchasing tires: Prioritize original equipment manufacturer (OEM) tires when selecting tires, as they are designed to best match the vehicle's speed and maximum load capacity. Therefore, theoretically, OEM tires should be the first choice when replacing tires. Additionally, pay attention to the tire tread pattern. The tread pattern on car tires not only enhances aesthetics but also significantly impacts tire performance. 2. Replacing low-profile tires: If you are unsatisfied with the vehicle's original handling, you may consider replacing them with lower-profile tires. For many car models, one of the most effective ways to improve the vehicle's appearance and handling performance is to switch to low-profile tires.
17
1
Share

What is the reason why the door of Jetta VS5 cannot be locked while driving?

Jetta VS5's door cannot be locked while driving may be due to poor contact in the central control system circuit or insufficient pulling force from a faulty door lock motor. Poor contact in the central control system circuit: First, check if the lock actuator is functioning. If there is no action, it is likely caused by poor contact in the central control system circuit, and it needs to be inspected and repaired at a service center. Insufficient pulling force from a faulty door lock motor: In this case, the motor needs to be replaced. How the car's central door lock works: It converts electrical energy into mechanical energy, using a motor to drive gears for opening and closing the door. Its basic components mainly include the door lock switch, door lock actuator, and door lock controller. It is designed for the convenience and safety of car use, providing centralized control for locking and unlocking the four doors.
12
0
Share

What is the displacement of the Passat 280tsi?

Passat 280tsi has a displacement of 1.4 liters. Here is the extended content: 1. Taking the Passat, a mid-size sedan under Volkswagen, as an example, the 280tsi model is equipped with a 1.4-liter turbocharged engine. This engine has a maximum power of 110kw, a maximum torque of 250 Nm, a maximum power speed of 5000 rpm, and a maximum torque speed ranging from 1750 to 3000 rpm. 2. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The '280' in 280tsi represents the engine's maximum torque. Although the actual maximum torque is 250 Nm, Volkswagen changed it to 280 because the number 250 doesn't sound as appealing. Volkswagen also offers models with 330tsi and 380tsi, which are generally equipped with 2.0-liter turbocharged engines.
19
4
Share

Why does the BMW 5 Series remote control sometimes work and sometimes not?

BMW 5 Series remote control sometimes working and sometimes not may be caused by a dead key fob battery, surrounding interference sources, or a faulty body control module. Dead key fob battery: When the key fob cannot transmit signals, it may cause malfunction. The solution is to replace the key fob battery and test drive to check if the issue persists. Surrounding interference sources: Interference sources around the vehicle may disrupt signals transmitted by the key fob or received by the antenna. The solution is to remove all aftermarket devices inside the car and then test drive. Faulty body control module: If the vehicle antenna or body control module is faulty, causing the antenna to fail to receive signals or the body control module to fail to recognize signals, the key fob's lock/unlock function may be affected. The solution is to visit a professional repair facility for inspection and maintenance.
15
0
Share

At what RPM does the turbo engage in the Corolla 1.2T?

The turbo in the Corolla 1.2T engages at around 1000 RPM. D-4T Introduction: The D-4T is a turbocharged engine. The newly developed D-4T turbocharged engine utilizes Toyota's latest dual VVT-iW variable valve timing technology, enabling the engine to seamlessly switch between Otto cycle and Atkinson cycle modes. When more power and acceleration are needed, the engine system operates in Otto cycle mode to ensure sufficient performance. Advantages of Turbocharged Engines: The Corolla 1.2T turbocharged engine delivers better acceleration performance. This is because turbocharged engines have greater "lung capacity," similar to how people with larger lung capacity can perform better in physical activities. Generally, the power output of a turbocharged engine can reach levels equivalent to 1.3-1.5 times that of a naturally aspirated engine of the same displacement.
8
5
Share

What are the gears of the Mercedes-Benz e200?

Mercedes-Benz e200 has P, R, N, D gears. Gear description: P Parking gear: This gear is generally at the top of the gear lever. It needs to be engaged when parking for a long time. If the parking gear is not engaged when the engine is turned off, the parking gear should be engaged first and then the ignition should be started next time. R Reverse gear: It can only be engaged when the car is stopped. N Neutral gear: The transmission is in neutral (idle gear), at this time, no force is transmitted to the wheels and the engine's braking effect cannot be used. D Drive gear: Used when the vehicle is moving forward, the drive gear is below the neutral gear. Gear shifting operation: Step on the brake, pull the gear lever down to the "D" gear, and then push the gear lever to the right to enter the manual mode. At this time, you can downshift the vehicle through the "-" downshift paddle on the left, and upshift the vehicle through the "+" upshift paddle.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.