···
Log in / Register

What items are included in the first maintenance? How long does it take?

6Answers
DiLily
07/28/2025, 06:55:16 PM

The first maintenance includes: changing the engine oil, replacing the oil filter, cleaning the air filter, checking the levels of various fluids, inspecting the generator belt and wiper blades for damage, checking tire pressure, and examining the chassis and all switches of the vehicle. The entire process takes approximately 2 hours at a 4S dealership. The first maintenance refers to the initial service after a new car has been driven, and the timing varies by vehicle, typically performed after driving 1,000 to 3,000 kilometers. It is essential to adhere to the scheduled first maintenance, neither advancing nor delaying it. Completing the first maintenance indicates the end of the vehicle's break-in period, allowing it to be driven at standard loads and normal speeds as specified. The first maintenance time is calculated from the date of vehicle delivery, with two indicators: mileage and time. Whichever comes first should be followed, as exceeding either may affect the warranty.

Was this review help?
105
Share
JakeDella
08/11/2025, 10:17:27 PM

I just had my first maintenance service, which included changing the engine oil and oil filter, checking tire pressure, the brake system, various fluids like coolant and brake fluid, as well as ensuring all lights are functioning properly. They also inspected the chassis and body to make sure there were no abnormalities. The whole process took about an hour and a half to complete. If the shop is busy, it might take a bit longer, but it usually doesn’t exceed two hours. I always remember that regular maintenance has many benefits—it keeps the engine running smoothly and improves fuel efficiency. The first maintenance for a new car is mostly free, which is a great opportunity to experience their service. Remember to book an appointment before going to avoid waiting in line.

Was this review help?
8
Share
Expand All
DiCarter
10/01/2025, 12:49:48 AM

I remember during my first maintenance service, they replaced the oil filter, checked all the lights and tire pressure, and also verified if the coolant level was up to standard. The whole process was straightforward and took just over an hour. I've learned that delaying maintenance can potentially affect the warranty coverage, so now I've developed a habit of visiting the service center every 5,000 kilometers or so to keep the car in good condition and save money in the long run.

Was this review help?
4
Share
Expand All
Lulu
11/14/2025, 01:37:31 AM

My husband uses the car frequently, so I accompanied him for the first maintenance. The technician mainly replaced the engine oil, cleaned the air filter, and carefully checked the brake pad wear and power steering fluid condition. The whole process took about 70 to 90 minutes, which was quite manageable. Safety is the top priority, and regular maintenance helps detect minor issues early to avoid problems on the road.

Was this review help?
2
Share
Expand All
MacKira
01/04/2026, 03:18:11 AM

After working in car repairs for a while, you'll realize that the key to the first maintenance lies in matching the oil specification to the vehicle model, such as 0W-20 synthetic oil. It's also crucial to replace the filter promptly to prevent impurities from entering the engine, while checking for loose wiring connections or abnormal electrical leaks. The process usually takes about seventy minutes. For a hassle-free experience, it's best to schedule an appointment during a morning slot to avoid peak hours, ensuring fewer people and higher efficiency.

Was this review help?
8
Share
Expand All
StDonovan
04/01/2026, 03:22:26 AM

From a practical perspective, the first maintenance service covers oil change and basic inspections like tires, lights, and braking system. The entire process takes about one to two hours, not exceeding too much. It's recommended for new car owners to arrive on time to avoid queues, preventing wasted valuable time that could disrupt daily work routines and incur additional repair costs.

Was this review help?
5
Share
Expand All
More Q&A

How to Open and Close the Front Hood?

The method to open and close the front hood is: 1. Pull the hood release handle located near the driver's knee to open a small gap; 2. Flip the spring latch inside the hood to fully open it; 3. To close, lift the spring latch and gently press the hood downward with slight force. The functions of the front hood are: 1. It effectively adjusts the airflow direction and resistance force during vehicle movement, reducing aerodynamic impact; 2. It protects the engine, electrical circuits, fuel system, braking system, and drivetrain; 3. It optimizes light reflection direction and pattern, minimizing glare interference for the driver.
103
Share

What is the standard cylinder pressure?

Cylinder pressure standards are approximately 1000KPA for gasoline engines and around 2000KPA for diesel engines. Below are specific details about cylinders: 1. Function: The cylinder is the main body of the engine, connecting all cylinders and the crankcase into one unit. It serves as the supporting framework for installing pistons, crankshafts, and other components and accessories. 2. Working Conditions: The cylinder block operates under extremely harsh conditions. It must withstand rapid changes in pressure and temperature during combustion, as well as intense friction from piston movement. 3. Performance: It must have sufficient strength and rigidity, minimal deformation, ensuring correct positioning of all moving parts for normal operation and low vibration and noise. It should also have excellent cooling performance, with cooling water jackets around the cylinder liner to dissipate heat. Additionally, it must be wear-resistant to ensure a long service life for the cylinder block.
114
Share

What is the tire model of Chery A3?

The tire model of Chery A3 is 205/55R16. Chery A3 is a compact 4-door 5-seater sedan with body dimensions of: length 4352mm, width 1794mm, height 1464mm, wheelbase 2550mm, and fuel tank capacity of 57L. The Chery A3 is equipped with a 1.6L naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 93 kW and a maximum torque of 160 Nm. It features front-wheel drive, with MacPherson independent suspension at the front and multi-link coil springs with stabilizer bar at the rear.
115
Share

Where is the Crankshaft Position Sensor Located on a 2010 X-Trail?

The crankshaft position sensor on a 2010 X-Trail is located near the exhaust manifold, between the engine and the transmission. Here is more information about the crankshaft position sensor: 1. Overview: The crankshaft position sensor is one of the most important sensors in the engine electronic control system. 2. Functions: (1) Detects engine speed; (2) Detects the top dead center position of the pistons, hence also known as the top dead center sensor, including detecting the top dead center signals for each cylinder used in ignition control and the first cylinder top dead center signal for sequential fuel injection control. 3. Classification: The structure of the crankshaft sensor varies depending on the vehicle model and can be divided into three main types: magnetic pulse, photoelectric, and Hall effect.
107
Share

What Causes Excessive Transmission Temperature?

There are many reasons for excessive transmission temperature. Below is a detailed analysis of the specific causes of high transmission temperature: 1. Engine and coolant temperature too high: Prolonged or overloaded operation of the engine can raise the coolant temperature, thereby affecting transmission cooling; additionally, insufficient coolant in the radiator reduces the cooling system's effectiveness, leading to transmission overheating. 2. Transmission clutch slipping: Clutch slippage generates additional heat, increasing transmission temperature and degrading transmission oil quality, which accelerates transmission wear. 3. Thermostat stuck: If the transmission thermostat gets stuck, transmission oil cannot enter the cooling system, preventing the heat generated by the transmission from being dissipated. 4. Insufficient transmission fluid: Low transmission fluid levels increase gear shift roughness and reduce cooling efficiency, causing transmission temperature to rise and potentially damaging internal components. 5. Clogged radiator grille: A blocked grille prevents timely dissipation of transmission heat, leading to increased transmission temperature.
114
Share

What to Do If You've Filled Up with Poor-Quality Gasoline?

Completely remove the remaining gasoline from the fuel tank and refill with higher-quality gasoline. Here are some details about dealing with poor-quality gasoline: 1. Remedial Measures: Clean the fuel injectors, combustion chambers, and replace the fuel filter and fuel pump, as they can easily get clogged by excessive impurities. Only by doing so can all the poor-quality gasoline be thoroughly removed. However, it's best to leave this task to professionals at 4S shops or auto repair shops, as it goes beyond our capabilities to handle it properly. Mishandling could potentially damage the engine. 2. Effects of Poor-Quality Gasoline: Not only does it reduce the car's power output, but it also causes noticeable vibrations and unusual noises during idling. Additionally, poor-quality gasoline often lacks good anti-knock properties, making the engine prone to knocking. Over time, this can lead to significant carbon buildup, increasing fuel consumption. In severe cases, it can damage the catalytic converter, resulting in very high repair costs.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.