What items are included in FAW-Volkswagen's first maintenance?
1 Answers
The first maintenance at a 4S shop includes the following aspects: changing the engine oil and oil filter, cleaning the air filter; checking whether the levels of various fluids are normal, inspecting the generator belt and wiper blades for any damage; checking whether the tire pressure is normal, and if there is any uneven wear, bulging, or damage to the tires; inspecting the chassis, including: brake pads, brake discs, connecting rods, ball joints, CV joints, for any scratches, etc.; checking all switches in the vehicle; ensuring the lights are working properly. Estimated time: Completing all tasks takes about 2 hours. Items needed for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's registration certificate; vehicle's purchase invoice, to be taken to the designated first maintenance facility for the vehicle's first maintenance. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with specific timing varying by vehicle, generally after driving 1,000 to 3,000 kilometers. The car must attend the first maintenance promptly, neither in advance nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven according to the standard load and normal speed required by the vehicle. The timing of the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first serves as the standard. The following inspections and replacements must be completed during the first maintenance of a new car: changing the engine oil, cleaning the three filters, namely the oil filter, fuel filter, and air filter; checking whether the car's coolant level is in a normal state; inspecting the positions of the car's brake and clutch fluid levels; checking whether the power steering fluid level is normal and if there are any oil leaks at the pipe connections; workers should inspect the generator, air conditioning, water pump, and the aging and tension of the belts; checking the tire pressure and wear condition, inflating the tires, or performing tire rotation if there is wear. When changing the engine oil, the oil filter must also be replaced. The selection of engine oil must refer to the "Vehicle Use and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not wash the interior of the car body with water: Many people clean their cars themselves during holidays, washing the body with water and wiping it with a cloth. Here, it is important to remind that the interior of the car body should not be washed directly with water. If the floor mats are dirty, you can use a vacuum cleaner or take them out, brush them with detergent, dry them, and then put them back. There are many through-holes in the grooves under the rubber mats on the cabin floor. If water enters, it will not dry by air but will flow through the holes to areas like the gearbox, causing erosion and corrosion. The best practice is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is low, it is recommended to drain the antifreeze and add the same brand of antifreeze from the start. Because different brands of antifreeze have significantly different chemical properties. Various functional additives may corrode other functional additives. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When the bolts on a moving car rust, it is common to oil them to make them work properly again. To prevent the bolts and nuts on the wheels from rusting, some people apply lubricant to them, but this brings necessary risks to safe driving. When the car is driven at high speed, the bolts and nuts can easily loosen or even fall off, leading to driving failures. Do not press the accelerator when starting an EFI car: The starter of an EFI car is different from that of a regular car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and working conditions, allowing the starter to operate smoothly.
