What items are included in an engine oil maintenance package?

1 Answers
ArielMarie
07/30/25 9:07am
An engine oil maintenance package includes changing the engine oil and oil filter. Below is a detailed introduction to the maintenance items: 1. Engine system: Replace the engine oil and oil filter. Check if all lubricating fluids in the engine compartment are sufficient and if related components are loose. 2. Lighting system: Inspect whether the vehicle's lighting system is functioning properly. 3. Vehicle tires: Check for excessive wear on the vehicle tires. 4. Shock absorbers: Examine the shock absorbers for any oil leaks. 5. Vehicle chassis: Inspect the vehicle's chassis for any scratches, damage, looseness, or rust issues.
Was this review help?
8
2
Share
More Forum Discussions

What Causes the Squeaking Sound When Braking Slowly?

It is normal to hear a squeaking sound when lightly applying the brakes at low speeds. The reasons are as follows: 1. One cause of brake noise is excessive clearance in the brake pads. 2. Another reason is uneven hardness of the brake disc, leading to an uneven surface on the brake pads. 3. The slower and lighter the brake is released, the more noticeable this sound becomes. When the brake pedal is released, and the power and braking force are at a critical point, the friction between the brake pads and the brake disc produces noise. Below is some additional information about brakes: 1. Brakes generally consist of steel plates, bonded heat insulation layers, and friction blocks. They work by pressing the brake pads against the brake disc to create friction, thereby slowing or stopping the vehicle. 2. Due to friction, the friction blocks gradually wear out, so regular inspection and replacement of brake pads are necessary. 3. If the car makes a squeaking sound when braking slowly, this is normal because the brake pads and brake disc have not fully engaged to achieve tight contact and maximum friction, resulting in noise. 4. If the noise occurs during normal braking, timely repair is required.
16
5
Share

What Gear Should Be Used for Uphill Driving?

There is no definitive answer to what gear should be used when driving uphill, as it generally depends on the steepness of the slope, the vehicle's performance, and the speed during the climb. It cannot be simply stated which gear should be used. For manual transmission vehicles when driving uphill: 1. When driving uphill, it depends on the climbing power of the vehicle. Each car has its own climbing capability. For a gentle slope, if fourth gear provides enough power, use fourth gear to climb. 2. For a moderate slope, if third gear provides enough power, use third gear to climb. If third gear is insufficient, shift to second gear (this can be done either at the base or on the slope, but proper coordination between the clutch and accelerator is essential). 3. For a steep slope, try to use second gear if it provides enough power. If second gear is insufficient, shift to first gear (again, this can be done at the base or on the slope, but accurate judgment of the slope in advance and proper coordination between the clutch and accelerator are crucial). This approach ensures an economical, fuel-efficient, and safe driving technique.
16
1
Share

What Insurance is Required for Vehicle Inspection?

For vehicle inspection, you need to provide a copy of the compulsory liability insurance policy or an electronic version of the compulsory insurance certificate, the owner's ID card, and the vehicle license. Then, go to the vehicle management office's window specifically responsible for annual inspections to apply for the annual inspection sticker. Below is relevant information about vehicle inspection: On-site Inspection: Starting from September 1, 2014, the state implemented new regulations, allowing vehicles that meet the specified conditions to enjoy a 6-year exemption from on-site annual inspections. This applies to non-operational passenger vehicles registered after September 1, 2010 (operational vehicles require annual inspections once a year). Within the first 6 years, you only need to collect the annual inspection sticker every two years without undergoing on-site inspection. For non-operational vehicles older than 6 years, an annual on-site inspection is required, covering items such as exhaust emissions, exterior appearance, and external lighting. Materials Required for Annual Inspection: For personal vehicle annual inspections, the required documents and items include the original vehicle license, a copy of the compulsory insurance policy, a copy of the owner's ID card, the vehicle must be present, a triangular warning sign, and a fire extinguisher.
12
5
Share

Which One is the Car Defroster Switch?

The car defroster switch is located in the middle of the center console, usually next to the AC button. Here are some details about the car defroster: 1. Appearance: The car defroster switch is marked with a front windshield and three upward-curving lines. A semicircular icon represents the front windshield, while a square icon represents the rear window. 2. Purpose: The car defroster switch controls the defroster, which is used to reduce moisture, fog, and frost on the front and rear windshields and the exterior rearview mirrors, improving visibility. 3. Physical Principle: The principle of cold-air defrosting involves the liquid refrigerant absorbing heat from the cooled object in the evaporator, vaporizing into low-temperature, low-pressure steam, which is then sucked into the compressor and compressed into high-temperature, high-pressure steam before being discharged into the condenser. The principle of hot-air defrosting involves fog-laden gas flowing through the defroster at a certain speed. Due to the gas's inertia, the droplets formed by the collision of fog and the wave plates become large enough that the gravity of the droplets exceeds the combined force of the gas lift and the surface tension of the liquid, causing the droplets to separate from the wave plate surface.
15
5
Share

What are the benefits of machine replacement of transmission fluid?

The benefits of machine replacement of transmission fluid include maintaining the cleanliness of the gear shifting system and providing lubrication to the transmission components, thereby extending their lifespan. Below is an introduction to the transmission fluid machine: 1. Working Principle: The automatic transmission cleaning and equal-volume fluid replacement machine uses two gravity sensors to measure the weight of the new and old fluids. Based on the flow rate calculated per unit time, it first determines the flow rate of the old fluid, then adjusts the speed of the new fluid pump via a computer chip to match the flow rate of the old fluid. During this replacement process, the new fluid pump speed is continuously adjusted to add new fluid to the transmission. When the replacement reaches the operator-set fluid volume, the device completes the replacement, stops the new fluid pump, and automatically switches the transmission fluid circuit to a self-circulating mode. 2. Maintenance: During the use of the device, do not smoke near it. Avoid using the device near heat sources or open flames. The device should only be used indoors, away from direct sunlight or rain. After use, turn off the power. During operation, keep hoses away from rotating and hot parts of the vehicle, such as fans and radiators.
7
0
Share

How to Choose Between the 2019 LaCrosse Luxury and Premium Models?

If price is not a consideration, the Premium version is recommended as it offers significantly more configurations. If budget is a concern, then the Luxury version would be the better choice. Below is a partial introduction to the LaCrosse Luxury and Premium models: 1. Features: The LaCrosse series comes standard with the upgraded Buick eConnect 2.0 connectivity technology, supporting OTA remote updates, real-time in-car navigation, in-car APP interconnectivity, personalized account management, dual Bluetooth device connections, and other connectivity features. It provides 22 main services across 7 categories and 4 value-added services, with enhanced remote vehicle operation via smartphone. Owners can view and remotely control their vehicles anytime through the OnStar mobile APP. 2. Configurations: The differences between the entry-level 28T Luxury and the mid-range 28T Premium include adaptive headlight high/low beams, automatic reverse tilt-down mirrors, rain-sensing wipers, front parking sensors, ACC adaptive cruise control, automatic parking, an 8-inch driving computer display, front seat height adjustment, front seat ventilation/massage, driver seat memory, front passenger seat boss key, BOSE premium audio, in-car air purifier, lane departure warning, and automatic emergency braking.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.