What items are included in a car's first maintenance?

1 Answers
EvaDella
07/29/25 11:36am
The items to be performed during a car's first maintenance include: 1. Inspecting and tightening all mechanical connection nuts in the engine compartment and throughout the vehicle; 2. Checking the tire tread and pressure, removing small stones embedded in the tires, and performing a four-wheel alignment check; 3. Replacing the engine oil and oil filter. Maintenance precautions: 1. Avoid washing the car a few days before maintenance, as most 4S shops provide complimentary car cleaning after service; 2. If there are minor paint damages like stone chips, you can request free touch-up paint from 4S technicians; 3. After maintenance, it's recommended to keep detailed records of the service content, time, materials used, and costs for future reference.
Was this review help?
13
5
Share
More Forum Discussions

How much fuel can a scooter motorcycle hold?

How much fuel a scooter motorcycle can hold depends on the specific model: ordinary cross-type motorcycles can typically hold about 10 to 14 liters; underbone motorcycles can hold approximately 3.5 to 4 liters. A motorcycle is a flexible and fast means of transportation, powered by a gasoline engine, and steered by handlebars to control the front wheel. It comes in two or three-wheel configurations, offering light weight, agility, and high speed, making it widely used for patrols, passenger and cargo transport, and as sports equipment. A motorcycle consists of an engine, transmission system, running gear, braking system, and electrical instrumentation. The transmission system of a motorcycle includes primary reduction, clutch, gearbox, and secondary reduction.
6
4
Share

What Could Be the Reasons for ABS Failure in a Sedan?

ABS light can illuminate in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections between system wires or faulty ABS relay contacts, leading to system failure. Solution: Inspect wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, causing the ABS light to turn off. Another possible cause is insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor electrical connector contact of the ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary. Check if the connector gap has widened. Replace the ABS or ABS/ASR control unit if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control unit detects a significant discrepancy between the rear and front wheel speed signals. Incorrect tire or wheel rim specifications may also cause this issue. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: With the engine running, press the brake pedal and push the brake switch linkage down fully with a finger, then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's path, posing significant safety risks.
15
1
Share

Where is the fuel filter located in the Honda Vezel?

The fuel filter in the Honda Vezel is located inside the fuel tank. The fuel filter, also known as the gasoline filter or fuel filter, is a wear-prone component among automotive parts and requires frequent replacement. The fuel filter is used to filter gasoline and is a crucial part of the vehicle. Taking the 2020 Honda Vezel as an example, its body dimensions are: length 4328mm, width 1772mm, height 1605mm, with a wheelbase of 2610mm and a curb weight of 1227kg. The 2020 Honda Vezel features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131PS, a maximum torque of 155Nm, and a maximum power of 96kW, paired with a 6-speed manual transmission.
10
5
Share

What are the two mirrors on the left and right sides of the car called?

The two mirrors on the left and right sides of the car are called rearview mirrors, also known as side mirrors. The function of rearview mirrors: They reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, expanding the driver's field of vision, and increasing safety during reversing and driving. The method to adjust the rearview mirrors is: 1. Adjust the horizon image in the left rearview mirror to the center of the mirror; 2. Adjust the image of the left side of the car to occupy one-fourth of the right side of the mirror; 3. Adjust the horizon image in the right rearview mirror to two-thirds of the mirror's height; 4. Adjust the image of the right side of the car to occupy one-fourth of the left side of the mirror.
16
4
Share

What are the steps for recharging refrigerant in a car's air conditioning system?

The steps for recharging refrigerant in a car's air conditioning system are: 1. Prepare intact and qualified refrigerant and charging tools; 2. Connect the car's air conditioning system to the charging tool with an adapter; 3. Inject liquid refrigerant from the high-pressure side. Methods to determine whether a car's air conditioning system needs refrigerant recharge are: 1. If there are continuous bubbles in the sight glass of the pipeline when the air conditioning is running, it indicates low refrigerant level; 2. If there are no bubbles whether the air conditioning is running or stopped, it indicates excessive refrigerant; 3. If there are no bubbles when the air conditioning is running but briefly appear when it stops, it indicates normal refrigerant level; 4. Open the hood and check if there are oil stains at the air conditioning system joints, as oil stains indicate a refrigerant deficiency.
12
1
Share

How Long Before Expiration Can a Driver's License Be Renewed?

Driver's license renewal can be processed up to 90 days before the expiration date. Before renewal, all traffic violation penalties associated with the license must be settled. Here are the specific details regarding the renewal process: Renewal Information: Required documents for renewal include ID card, driver's license, medical examination certificate, and photos. If renewing in a different location, an application must be submitted in advance, along with a residence permit, which requires at least six months of prior application. Important Notes: If the driver is unable to renew the license within the specified time due to reasons such as military service or traveling abroad, they can apply for an extension of the renewal period at the vehicle management office where the license was originally issued, within the validity period of the license review.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.