What items are generally included in the first maintenance?

2 Answers
DeZoe
07/24/25 1:25am
The items generally included in the first maintenance are as follows: 1. Check if the coolant level in the car meets the specified requirements. 2. Check the fluid levels of the brake and clutch. 3. Check if the oil level in the power steering fluid reservoir meets the specified requirements, and inspect all oil pipe connections for leaks. 4. Check the battery fluid level and the level of the windshield washer fluid reservoir. 5. Inspect the tension and aging condition of the belts for the generator, air conditioning, water pump, and power steering pump. 6. Check if all front and rear lights are functioning (including headlights, width markers, turn signals, brake lights, reverse lights, and fog lights). 7. Check the tire pressure and wear condition, tighten the tire bolts to the specified torque, adjust the tire pressure to the manufacturer's recommended level, and rotate the tires if necessary based on wear. 8. Check if the car's exhaust emissions meet the required standards.
Was this review help?
5
3
Share
BlakelyFitz
08/10/25 9:04pm
The first maintenance is the initial service for a new car, typically required a few months after purchase or upon reaching a specified mileage. The most crucial tasks include changing the engine oil and oil filter, as the new engine needs to clear manufacturing residues to protect it. Tire inspection is also essential, covering tire pressure measurement and wear assessment to ensure safer high-speed driving. Technicians will also check the braking system, examining brake pad thickness and brake fluid levels, which is key to preventing unexpected stops. Lighting and electrical systems are mandatory checks too—proper functioning of headlights and taillights is super important for night driving. Additionally, they might clean the cabin air filter to keep the interior air fresh. A computer diagnostic scan is usually performed to check the vehicle's control systems and catch any hidden minor issues. Overall, the first maintenance is inexpensive or even free, but it should never be delayed, as neglecting it could harm the car's longevity and prove costly in the long run.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What are the test items for C1 Subject 2?

The C1 Subject 2 driving test mainly consists of five items: reversing into a garage, parallel parking, curve driving, right-angle turning, and hill start and stop. Subject 2 test tips: Before driving during the Subject 2 test, be sure to adjust the seat height, adjust the rearview mirror to ensure a wide field of vision, and fasten the seat belt. During the test, do not stop unless the voice prompts a failure. Parallel parking: The parking space length is 1.5 times the vehicle length plus 1 meter. Drive the vehicle parallel to the garage in the forward direction, then reverse into the garage to the right rear without any pauses. As long as the vehicle is parked within this range without crossing the boundary lines, it is considered a pass. Remember to find the right angle, turn the steering wheel quickly, react promptly, and coordinate with the vehicle's speed. Hill start and stop: Requires stopping and starting at a fixed position on a slope with a gradient ≥10% and a length ≥30 meters. It tests the coordination of direction, braking, and clutch. The purpose is to train drivers to accurately judge the vehicle's position and correctly use the brake, gear, and clutch to meet the needs of stopping and starting on uphill sections. Right-angle turning: Tests the driver's ability to correctly manipulate the steering and accurately judge the inner and outer wheel differences when driving on sharp turns. Use first gear, release the handbrake, slowly lift the clutch to maintain semi-linkage, and move forward at a constant speed. Keep the left wiper's left dot (first rivet) 20 cm away from the yellow line on the right edge of the road, then focus on a point just in front of the left door lock. Curve driving: Commonly known as the S-curve. The test requires driving on an S-shaped road of a specified width without pressing the edge lines and with smooth steering. It assesses the driver's ability to manipulate the steering and control the vehicle on curves. The purpose is to train drivers in steering application and mastering wheel trajectory. Reversing into a garage: Reverse from starting point A into garage B and park correctly. Move forward to the return area C and stop. Reverse from the return area into garage B and stop. Return from garage B to A to complete the test. Control the speed, find the reference points, and make minor adjustments if the rearview mirror shows any deviation. Subject 2 deduction items: Reversing into a garage: Vehicle body crossing the line, 100 points deducted, deemed unqualified; failing to enter the garage, 100 points deducted, deemed unqualified; stopping midway, 5 points deducted each time; failing to complete the test within the specified time, 100 points deducted, deemed unqualified. Parallel parking: Vehicle body crossing the line after parking, 100 points deducted, deemed unqualified; stopping midway, 5 points deducted each time; tires or body touching the edge lines, 10 points deducted; failing to complete the test within the specified time, 100 points deducted, deemed unqualified. Curve driving: Wheels pressing the edge lines, unqualified; stopping midway, unqualified; not using second gear or above, 5 points deducted. Right-angle turning: Wheels pressing the edge lines, unqualified; stopping midway, 5 points deducted each time. Hill start and stop: After stopping, if the front bumper or motorcycle front axle is not on the pole line and exceeds 50 cm, unqualified; exceeding the specified start time, unqualified; after stopping, if the front bumper or motorcycle front axle is not on the pole line but does not exceed 50 cm, 10 points deducted; after stopping, if the body is more than 30 cm but less than 50 cm from the road edge, 10 points deducted; failing to tighten the parking brake, 10 points deducted. C1 license test passing standards: Traffic regulations and related knowledge—90 points to pass. Field driving—80 points to pass. Road driving—80 points to pass. Safe and civilized driving knowledge—90 points to pass. C1 driver's license allows driving small and micro passenger vehicles. The C1 test consists of four subjects, with other items as follows: Subject 1: Mainly tests basic road traffic knowledge. Subject 3: Mainly tests 16 driving skills including preparation, starting, and straight-line driving. Subject 4: Mainly tests safe and civilized driving requirements, similar to Subject 1 as a theoretical test.
8
5
Share

What engine does the Ferrari F8 use?

Ferrari F8 uses a 3.9T twin-turbocharged engine with a compression ratio of 9:6. Taking the 2020 Ferrari F8 as an example, it belongs to the sports car category with the following dimensions: length 4611mm, width 1979mm, height 1206mm, wheelbase 2650mm, and fuel tank capacity of 78L. The 2020 Ferrari F8 features a double-wishbone front suspension and a multi-link independent rear suspension. It delivers a maximum horsepower of 720PS, maximum power of 530kW, and maximum torque of 770Nm, paired with a 7-speed dual-clutch transmission.
5
1
Share

What Are the Solutions for Low Range of New Energy Vehicles in Winter?

Solutions for low range of new energy vehicles in winter include: 1. Parking the vehicle in a warm garage; 2. Preventing the battery from getting too cold; 3. Turning off unused electrical devices while driving; 4. Driving smoothly and avoiding aggressive acceleration; 5. Adding antifreeze; 6. Ensuring the battery remains fully charged. Reasons for low range of new energy vehicles in winter: 1. Increased viscosity of the electrolyte in low temperatures, leading to reduced conductivity of lithium-ion batteries; 2. Poor compatibility between the electrolyte and the negative electrode/separator in low temperatures; 3. Severe lithium deposition on the negative electrode of lithium-ion batteries in low temperatures; 4. Reduced diffusion system of active materials inside lithium-ion batteries in low temperatures.
11
3
Share

How to Switch from Automatic to Manual Mode in a Tiptronic Transmission?

Tiptronic switching to manual mode is done by releasing the accelerator while driving and shifting the gear lever to the M position. Tiptronic gear operations: 1. D is the drive gear, used for normal road driving; 2. R is the reverse gear, which can only be engaged after the car has come to a complete stop; 3. P is the parking gear, used when the vehicle is stationary and should be accompanied by engaging the handbrake; 4. L is the low gear, providing greater power output; 5. N is the neutral gear, used when pausing the vehicle; 6. W is the winter/snow gear, suitable for driving on slippery or snowy surfaces; 7. E is the economy gear; 8. S is the sport mode driving gear.
8
0
Share

What are the causes of radiator leakage?

The causes of radiator leakage are: 1. Damaged rubber ball valve, resulting in poor sealing; 2. Aging rubber gasket at the drainage outlet under the ball valve, leading to poor sealing; 3. Loose connection between the spherical float in the radiator and the water inlet switch; 4. Cracked water pipe; 5. Caused by emulsified engine oil; 6. Radiator cap not fastened tightly; 7. Cracked radiator cooling pipe. Solutions for radiator leakage: 1. Add a strong radiator sealant to the radiator; 2. Disassemble the engine and replace the cylinder gasket; 3. Check the aging condition of the drainage outlet rubber gasket and replace it in time; 4. Check and securely fasten the radiator cap; 5. Inspect whether the water pipe is cracked.
4
4
Share

Where is the diagnostic socket for the C4L?

The diagnostic socket for the C4L is located under the small box in front of the gear shift lever. Remove the small box to access it. Taking the 2019 C4L as an example, it belongs to the compact car category, with body dimensions of: length 4675mm, width 1780mm, height 1500mm, wheelbase 2710mm, fuel tank capacity 60L, and curb weight 1335kg. The 2019 C4L features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 136PS, maximum power of 100kW, and maximum torque of 230Nm, paired with a 5-speed manual transmission.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.