What issues should be paid attention to in Subject 2?

1 Answers
Blanco
07/30/25 12:52am
Precautions for Subject 2 test: 1. Mock test: The purpose of the mock test is to familiarize the candidate with the test environment, and at the same time, the coach can guide on the points where marks are easily deducted. Therefore, the mock test is absolutely essential, and full preparation is necessary to best face the challenge. 2. Relax: Dress comfortably before the test and be mentally prepared; pay attention to the key points when reversing into the garage, do not turn left or right; when parking in a side position, ensure the rear wheel exceeds the edge line of the garage, adjust the distance properly, remember to turn on the turn signal and honk the horn. When making a sharp turn, steer the wheel decisively after aiming at the correct position; when driving on a curve, make a wide turn after entering the curve, maintain a steady speed, and avoid crossing the line in all the above situations. 3. Pay attention to signing: After the test, drive the car back to the starting position, sign the confirmation, and then turn off the engine. 4. Bring your ID card: You must bring your ID card to the test, as you cannot take the test without it. After so much preparation, do not let the lack of an ID card prevent you from taking the test. Additionally, make sure to turn off your phone during the test, as any sound from the phone will be considered cheating.
Was this review help?
10
3
Share
More Forum Discussions

What are the dimensions of the BYD Dolphin?

The BYD Dolphin measures 4070(4125)×1770×1570mm in length, width, and height, with a wheelbase of 2700mm. For reference, the current BYD E2 model measures 4240×1760×1530mm with a wheelbase of only 2610mm. From the data, it can be seen that the BYD Dolphin adopts a shorter body size but a larger wheelbase, which is believed to offer superior interior space. Relevant information about BYD is as follows: Introduction: BYD is a Chinese automotive brand founded in 1995, primarily producing commercial and family cars as well as batteries. Starting with a team of just over 20 people, BYD grew to become the world's second-largest rechargeable battery manufacturer by 2003, the same year it established BYD Auto. Logo Meaning: The new BYD logo no longer uses the original blue-and-white color scheme; the design has been changed to an oval shape with added light and shadow elements. Significant changes have been made to the font arrangement and graphic colors, highlighting BYD Auto's innovation, technology, and the essence of corporate culture, infusing the BYD brand with new meaning and vitality.
13
5
Share

What is the fuel tank capacity of the BYD S7 in liters?

The fuel tank capacity of the BYD S7 is 72 liters, as officially announced. Owners who have purchased the BYD S7 can also check this information on the vehicle's configuration sheet. The BYD S7 requires 92-octane fuel, with a fuel consumption of 7.5 to 8.8L per 100 kilometers. A full tank can cover a distance of approximately 818 to 960 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to a safe fill level, leaving some space between the safe fill level and the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
12
5
Share

Which series does the Mercedes-Benz 400 belong to?

Mercedes-Benz models equipped with a 3.0T 333-horsepower V6 engine are all named 400, with the Mercedes S400 as an example. Appearance features of the Mercedes S400: In the minor facelift, Mercedes-Benz did not make many changes to the S-Class. The front end follows the brand's recent family style, featuring a larger and more sharply contoured grille. At the rear, the body-colored trim on the taillight clusters was removed and replaced with full LED light clusters, incorporating the reverse light design. This retains the original two-bar style while improving rear lighting effects. The redesigned front and rear bumpers have sharper lines, giving the S-Class a more youthful and sporty appearance. The high-brightness LED daytime running lights are exclusive to the S400 Hybrid and S600 models, highlighting the technological prowess of the hybrid system and the V12 engine. Engine of the Mercedes S400: To improve overall fuel efficiency, the S400 Hybrid's engine, like the THS, operates on the Atkinson cycle. Mercedes-Benz engineers adjusted the intake valve timing of this V6 engine, delaying its closure compared to the original S350, to achieve a compression stroke shorter than the power stroke. This leverages the Atkinson cycle principle for higher thermal efficiency. To counteract the significant power loss typical of Atkinson cycle engines, Mercedes-Benz engineers recalibrated the V6 engine in the S400 Hybrid, increasing the compression ratio from 10.7:1 to 11.7:1 and adjusting fuel injection and ignition timing. As a result, this Atkinson engine maintains the same peak torque of 35.7 kg·m as the original engine, with maximum horsepower even higher at 279 hp. The S400 Hybrid accelerates from 0 to 100 km/h in just 7.2 seconds and can reach the electronically limited top speed of 250 km/h. More impressively, thanks to the hybrid system's excellent performance, along with Start/Stop and brake energy recovery systems, it achieves over 12 km per liter of gasoline, reducing fuel consumption by 21% and CO2 emissions by 18%, making the S400 Hybrid the most fuel-efficient model in its class.
4
0
Share

What is the wading depth of the BYD Han?

The maximum wading depth of the BYD Han is 250mm. The wading depth of the BYD Han is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally speaking, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the BYD Han is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, be sure to turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in the water, which could cause serious damage to the engine due to water ingress. Judge the underwater road conditions based on the passage of the vehicle ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed recklessly; choose an alternative route instead.
4
0
Share

Are Hyundai engines domestically produced or imported?

Hyundai engines are domestically produced by Beijing Hyundai Mobis Auto Parts Co., Ltd. The engine models used by Hyundai include G4FL, G4LD, etc. The G4FL engine has a maximum horsepower of 115 hp, a maximum power of 84.5 kW, a maximum power speed of 6300 rpm, and a peak torque of 143.9 N·m. The G4LD engine has a maximum horsepower of 140 hp, a maximum power of 103 kW, a maximum power speed of 6000 rpm, and a peak torque of 211 N·m. For daily maintenance of Hyundai engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB_CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil level moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
4
3
Share

How many seconds does the Triumph 660 take to accelerate from 0 to 100 km/h?

The Triumph 660 takes 14 seconds to accelerate from 0 to 100 km/h. Here is a detailed introduction about it: Introduction 1: The word "Trident" itself means "three-pronged spear," referring to the classic weapon held by the sea god Poseidon. Introduction 2: In the Triumph TRIENT-660 model, the trident not only carries the meaning of "divine weapon" but also subtly refers to the three-cylinder engine it is equipped with. Introduction 3: The single round headlight is one of the classic design elements of retro motorcycles, and the TRIDENT-660 also follows this tradition.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.