···
Log in / Register

What Issues Should Be Noted When Driving on Highways?

4 Answers
AlanAnn
07/29/25 3:55am
When driving on highways, the following issues should be noted: 1. Drive within the designated lanes: Vehicles on highways must adhere to traffic regulations, with different vehicle types staying in their respective lanes. For example, large buses and trucks should drive in the right lane, while small passenger vehicles should stay in the middle lane. Avoid driving in lanes not designated for your vehicle type for extended periods unless under special circumstances. 2. Fasten seat belts: Both the driver and front-seat passenger must wear seat belts throughout the entire journey on the highway. Do not unfasten them midway, and never skip wearing them out of complacency, as the consequences in case of danger could be severe. 3. Stay focused while driving: On highways, avoid making phone calls, looking at your phone, or using headphones to listen to recordings, as this may prevent you from hearing other vehicles' horns, leading to hazards. Also, refrain from throwing items out of the car to avoid affecting other vehicles or causing accidents. 4. Adhere to speed limits: When entering the highway, accelerate to at least 50 km/h as soon as possible. Speed up from the ramp to the acceleration lane before merging into the main lane, ensuring you do not obstruct other vehicles already in the main lane. During normal driving, do not exceed the maximum or minimum speed limits to prevent accidents. 5. Avoid unnecessary lane changes: Do not change lanes arbitrarily on highways. If overtaking is necessary, signal in advance and only overtake in the adjacent lane. Do not overtake multiple vehicles consecutively, and return to your original lane promptly after overtaking. Avoid driving on lane markings. 6. Avoid sudden steering: Always hold the steering wheel with both hands to maintain control. Avoid the bad habit of driving with one hand, as strong winds or adverse weather conditions may make steering difficult, potentially leading to accidents. 7. Never reverse or drive against traffic on highways: If you miss an exit, proceed to the next one. Do not attempt to turn around by crossing the median or reversing, as this could cause severe hazards. 8. Maintain a safe distance from other vehicles: Generally, determine the following distance based on your speed, referring to roadside distance markers. While keeping a safe distance from the vehicle ahead, also monitor the vehicle behind you. In case of emergency braking, always check the distance of the rear vehicle to prevent collisions.
Was this review help?
6
4
Share
CoraLynn
08/12/25 3:22pm
The first time I drove on the highway, I was extremely nervous, but now I’ve summarized a few key points. Maintaining a safe distance is the most important—don’t follow too closely, especially when there’s a large truck ahead; leave at least a two-second gap to prevent sudden braking. Don’t exceed the speed limit—most highways have a limit of 120 km/h, and going faster is unsafe and likely to result in a ticket. Stay focused—don’t use your phone or chat, and keep your eyes on the road and mirrors at all times. In rainy or foggy conditions, turn on your fog lights or hazard lights and reduce speed to prevent skidding. If you feel fatigued, pull into a rest area as soon as possible and take a 30-minute break—fatigue is a major cause of highway accidents. Once you understand these small details, driving becomes much easier and safer.
Was this review help?
4
2
Share
Expand All
StPaul
10/02/25 7:57am
Here are some tips for saving money and fuel on the highway. Smooth acceleration and maintaining a steady speed can save fuel—avoid slamming the accelerator and keep your speed between 100-120 km/h for optimal efficiency. Frequent lane changes or overtaking should be avoided, as each maneuver consumes extra milliliters of fuel. Before setting off, check your tire pressure; underinflated tires increase friction, wasting fuel and damaging tread. On long trips, avoid setting the air conditioning too high—keeping it at a comfortable temperature saves energy. Turn off the engine during breaks to save fuel. Remember to take regular breaks—staying alert improves driving efficiency and reduces the cost of repairs due to mistakes. A smooth, uninterrupted journey is the most cost-effective trip.
Was this review help?
16
1
Share
Expand All
OOmar
11/16/25 2:53am
When our family takes kids on highway trips, safety is the top priority. Children in the back seat must be securely fastened in child safety seats, and don't let them climb around or play with toys to avoid distractions. Drive smoothly without sharp turns or sudden braking, as kids are prone to motion sickness. Plan rest stops and take breaks at service areas every hour or two to stretch, hydrate, and snack to prevent discomfort. Play some music or tell stories to keep the atmosphere relaxed. In hot weather, avoid setting the air conditioning too cold to prevent heatstroke risks. Overall, stay focused on driving without distractions, and safely reaching the destination makes for a perfect journey.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What causes the steering wheel noise in Audi A4L?

Audi A4L steering wheel noise can have multiple causes, which need to be diagnosed based on the actual situation and sound type. Below are detailed explanations: Friction between plastic components: Especially in new cars, the steering wheel consists of various plastic parts. If the gaps between these parts are too small, friction may occur when turning the wheel. This usually resolves after a break-in period. If the noise persists, consider reassembling the steering wheel. Friction between steering column and floor mat: Oversized floor mats may directly contact the steering column, causing friction during rotation. Adjusting or replacing the floor mat can solve this issue. Clock spring failure in steering wheel: If the steering wheel has been disassembled, the clock spring (airbag spiral cable) might be broken or its connector unplugged. Replacement or reconnection is needed. Aging of tie rod end ball joint: Replace the tie rod end ball joint, but a wheel alignment is required after replacement. Steering gear failure: If there's particularly alarming noise from the steering wheel, it might be caused by excessive gear clearance in the steering gear. In this case, the steering gear needs replacement.
4
2
Share

Where to Place the Jack on Baojun 510?

Baojun 510's jack should be placed at the support points near the wheel edges on both sides of the vehicle chassis, which are designed for jack contact. The lifting part of the jack must be positioned on the chassis support points. Otherwise, it will be difficult to secure the vehicle, and it may cause damage to the jack or even the chassis. After lifting the vehicle, do not rush to remove the wheel hub screws; taking safety measures is the most important step. A jack is a lightweight lifting device that uses a rigid lifting component as the working mechanism to lift heavy objects within a small range through a top support or bottom claw. It is mainly used in factories, mines, and transportation sectors for vehicle repairs and other lifting or supporting tasks. Jacks have a wide range of applications, not only for cars but also for many industrial equipment that require such compact lifting devices. A common scenario for car jacks is tire replacement. Currently, mechanical and hydraulic jacks are widely used. The former is lightweight and portable, but due to its small size, its lifting capacity and stability are slightly weaker.
13
2
Share

What type of oil should be used for the eighth-generation Civic?

The 1.8L eighth-generation Civic should use semi-synthetic or higher-grade oil with the manufacturer-recommended viscosity of 5W-30. For the 1.5T engine, the manufacturer requires semi-synthetic or higher-grade oil with 0W-20/5W-30 viscosity. Method for changing the oil: Loosen the nut at the bottom of the transmission oil pan to allow the old transmission oil to drain naturally by gravity. Connect the transmission to a circulation machine via pipeline interfaces, and the new transmission oil will push out the old oil under pressure. Methods to determine if the oil needs to be changed: Pull out the oil dipstick and smell it closely. If there is a strong sour or foul odor, it indicates the oil has deteriorated and should be changed. Rub the extracted old oil repeatedly between your thumb and forefinger. If you feel impurities, poor viscosity, or even a gritty sensation, it should be changed. Hold the oil dipstick at a 45-degree angle under light and observe the oil droplets. If the droplets are clear without visible wear particles, the oil is in good condition. If there are many wear particles, the oil should be changed.
6
5
Share

Where to Connect the Negative Terminal for Jump-Starting a BMW 3 Series?

For the BMW 3 Series, the negative terminal is located behind the right front headlight. There is a metal post behind the headlight, which serves as the negative terminal for jump-starting. The positive terminal is near the right front suspension strut tower, covered by a red cap. Removing this cap reveals the positive terminal post. When replacing the car battery, always disconnect the negative terminal first, followed by the positive. To power off the vehicle, simply disconnect the negative terminal. When installing the battery, connect the positive terminal first, then the negative. For jump-starting a dead battery, first connect both vehicles' positive terminals, then the negative terminals. After starting the vehicle, disconnect the negative terminals first, followed by the positive. If the rescue vehicle's positive and negative terminals are connected first, the clamps on the ground may become tangled, leading to accidental contact between positive and negative clamps, causing a battery short circuit with severe consequences. If the jumper cables are the same color and the terminals cannot be distinguished, connecting positive to negative and negative to positive could result in a dangerous series short circuit between the two batteries. Exercise extreme caution during the operation. The car battery's negative terminal is connected to the chassis ground, meaning the car body acts as the negative terminal. After connecting both vehicles' negative terminals, connect the rescue vehicle's positive terminal first, then the dead vehicle's positive terminal. If the clamp accidentally touches a metal part of the car body, it would effectively connect both the rescue vehicle's positive and negative terminals to the dead vehicle's negative terminal, causing a short circuit in the rescue vehicle's battery.
13
5
Share

What are the differences between the second and third generation EA888 engines?

The differences between the second and third generation EA888 engines lie in the engine oil filler port: the oil filler port of the second-generation engine is located in the middle left position; the oil filler port of the third-generation engine is positioned at the rear left, behind the engine cover, and the engine cover of the third-generation engine is entirely black. An engine is a machine that converts other forms of energy into mechanical energy. Engines can refer to both the power-generating device and the entire machine including the power unit. Types of engines include internal combustion engines (gasoline engines), external combustion engines (Stirling engines, steam engines), gas turbines, and electric motors.
4
2
Share

When to Use Manual Mode in a Semi-Automatic Transmission?

Semi-automatic transmissions should be switched to manual mode in the following situations: 1. In shopping mall or underground parking garages, where the ramps are usually quite steep. If left in automatic mode, the transmission will upshift automatically, causing excessive wear. Switching to manual mode can prevent rolling back and provide more stable driving. 2. On mountain roads, manual mode helps effectively control vehicle speed to prevent accidents and avoids transmission overheating caused by frequent gear changes. The manual mode in semi-automatic transmissions differs from traditional manual transmissions. It typically features '+' and '-' signs, where '+' means upshift and '-' means downshift - simply push the lever up or down accordingly.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.