···
Log in / Register

What Issues Should Be Noted in Car Maintenance?

3 Answers
StAshley
09/01/25 6:37am
Here are the issues that should be noted in car maintenance: 1. Avoid running the engine for long periods in an unventilated garage. The exhaust from the engine contains carbon monoxide, an invisible and odorless toxic gas. Prolonged exposure to low concentrations of carbon monoxide can cause headaches, rapid breathing, nausea, vomiting, weakness, dizziness, mental confusion, and even brain damage. 2. Avoid sucking on fuel pipes with your mouth. Gasoline is not only flammable and explosive but also toxic, especially leaded gasoline, which can damage the nervous system, digestive tract, and kidneys. Additionally, gasoline contains high concentrations of sulfides, and since hydrogen sulfide is also toxic, ingesting gasoline can lead to poisoning or death. 3. Avoid contact with carburetor cleaner. Most carburetor cleaners contain methyl chloride, aromatic compounds, and ethanol, all of which are toxic. Inhaling these substances or getting them on the skin or eyes can be very dangerous. 4. Avoid fire hazards. During car maintenance, flammable and explosive materials such as fuels and cleaners are often used. Always remember to take fire prevention measures and keep a fire extinguisher handy. Do not smoke near the fuel tank or battery, as the flammable gases from the fuel tank and hydrogen from the battery can easily ignite. 5. Avoid burns. Be cautious when touching engine parts immediately after the engine has been turned off, as they can be very hot. If the engine is hot, never remove the radiator cap or loosen the drain switch to prevent burns.
Was this review help?
14
5
Share
CarmenAnn
09/14/25 2:29am
As an experienced driver with ten years behind the wheel, I believe the key to car maintenance lies in regular inspections and prevention. During daily driving, I always focus on several critical aspects: change the engine oil when it's due, otherwise increased wear can lead to costly repairs; check tire pressure monthly as low pressure increases fuel consumption and poses risks; monitor brake pad wear marks and replace them promptly if there's unusual noise; replace dirty air filters to prevent blocked airflow and reduced efficiency. I make it a habit to perform a full inspection every 5,000 kilometers—the maintenance manual is my bible, following it helps avoid major issues. Neglecting these small things could lead to catastrophic failures, like an oil leak causing engine failure—safety comes first, no compromises. Also, never overlook lubricant checks to ensure all moving parts operate smoothly. Regular maintenance extends vehicle lifespan and provides peace of mind while driving.
Was this review help?
18
5
Share
Expand All
StMax
10/28/25 3:12am
From a car enthusiast's perspective, maintenance is quite interesting and should start with the engine core. Using the right oil type for regular changes is crucial, as different models have different requirements; I clean dirty air filters myself for immediate power restoration; replacing spark plugs every few thousand kilometers improves ignition system smoothness; coolant checks prevent overheating and engine seizure; while at it, inspect belt wear as breakage can be troublesome. Keeping antifreeze topped up ensures no freezing damage in cold weather, while deeper tire treads significantly improve wet-weather safety. Learning to perform minor maintenance projects develops hands-on skills and saves costs, keeping the car performing reliably long-term without stress. Once it becomes routine, every startup feels noticeably smoother.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

What to Do When BYD Tang's Tire Pressure Monitoring Suddenly Shows Abnormal Readings?

If the tire pressure monitoring system of your BYD Tang suddenly shows abnormal readings, you can enter the tire pressure sensor matching mode to re-match the tires for inspection. If the issue persists, it is recommended to directly consult your local dealer for inspection and repair. Below are the common causes of tire pressure faults and their solutions: Causes of Tire Pressure Faults: Illumination of the tire pressure monitoring light due to a punctured tire; sometimes, the light may come on due to excessively high tire pressure; prolonged driving with low tire pressure can also trigger the tire pressure monitoring light. Solutions for Tire Pressure Faults: Usually, it's a very slow leak, making it difficult to immediately identify which tire is affected. In such cases, you can use a tire pressure gauge to measure the pressure. The standard pressure is 2.3 bar for the front tires and 2.5 bar for the rear tires. If a tire is underinflated, inflate it to the correct pressure and then observe the tire pressure warning light. If the light comes on again after a few days, you may need to remove the tire for a thorough inspection. According to the international GBT2978-2008 standard, the recommended inflation pressure for passenger car tires is: standard tires: 2.4-2.5 bar; reinforced tires: 2.8-2.9 bar; maximum pressure: should not exceed 3.5 bar. If any tire exceeds 3.0 bar, it may trigger the tire pressure monitoring light. If a tire's pressure is too low, high-speed driving can cause the tire temperature to rise, leading to increased tire pressure. In such situations, you should promptly stop to rest or replace the tire with a spare.
18
0
Share

Where is the cabin air filter located in a Mercedes-Benz B200?

Mercedes-Benz B200 cabin air filter is located above the passenger footwell. Here is relevant information about cabin air filters: Function of automotive cabin air filters: To filter air entering the vehicle cabin from outside, improving air cleanliness by removing impurities such as microscopic particles, pollen, bacteria, industrial exhaust, and dust. The cabin air filter prevents these contaminants from entering the AC system, thereby protecting the system, providing clean air for occupants, safeguarding passenger health, and preventing window fogging. Cabin air filter replacement interval: It's recommended to replace the cabin air filter annually. Prolonged use can make the filter extremely dirty, significantly reducing AC efficiency and potentially causing mold growth and unpleasant odors.
10
5
Share

How Long Can an Aisin 6AT Last?

Generally, the lifespan of an Aisin 6AT transmission is around 200,000 kilometers. The classification and maintenance methods of transmissions are introduced as follows: Transmission Classification: Currently, there are four common types of automotive transmissions: hydraulic automatic transmission (AT), mechanical continuously variable transmission (CVT), electronically controlled mechanical automatic transmission (AMT), and dual-clutch automatic transmission. Transmission Maintenance Methods: Master the replacement cycle of automatic transmission fluid, and it is recommended to change the fluid 2,000 to 3,000 kilometers in advance; correctly replace the transmission fluid using dedicated transmission fluid replacement equipment. During the operation of the transmission, fully circulate the old fluid, discharge it completely, and then add new transmission fluid, achieving a fluid replacement rate of over 90% and ensuring good fluid replacement results.
2
0
Share

What are the reasons for a motorcycle not accelerating when given throttle?

Motorcycle not accelerating when given throttle can be attributed to the following reasons: Low fuel: A lean air-fuel mixture causes insufficient thrust on the piston after ignition, leading to prolonged combustion time, engine overheating, and other malfunctions. Solution: Regularly clean the engine piston. Excessive fuel: An overly rich air-fuel mixture results in weak acceleration at low speeds. The lack of sufficient oxygen during combustion of the rich mixture leads to incomplete combustion, reducing power output and fuel efficiency, while also causing excessive carbon buildup that clogs the exhaust system, exacerbating the weak acceleration. Solution: Repair or replace the intake valve and intake pipe.
17
0
Share

Is the oil change interval for Weichai engines 60,000 kilometers?

Weichai's engine oil is changed every 60,000 kilometers. Here are the precautions for oil change: Oil filter must be replaced simultaneously with oil change: When changing the engine oil, the oil filter element should also be replaced. If the filter element is not replaced, the residual contaminants on it will quickly pollute the newly changed oil, causing the oil to deteriorate faster and fail to achieve the desired filtration effect. Oil change interval is closely related to actual usage: The oil change interval is not fixed and is closely related to factors such as the quality of the oil used, driving conditions, and driving habits. If the operating environment is harsh or aggressive driving is preferred, it is recommended to shorten the oil change interval.
2
4
Share

What does it mean when the maintenance reminder light comes on in the Honda Envix?

Honda Envix maintenance reminder light on indicates that the vehicle requires maintenance. Below are relevant introductions about car maintenance: Car maintenance tips: A dirty or clogged air filter can directly lead to increased engine fuel consumption and poor performance. Regularly check the air filter; if you find minimal dust and the clog is not severe, you can use high-pressure air to blow it clean from the inside out and continue using it. However, an excessively dirty air filter should be replaced promptly. Car maintenance precautions: It is important to note that when performing car maintenance, choose a well-ventilated area. This is because the engine releases carbon monoxide during operation, and ventilation helps avoid inhaling carbon monoxide during the maintenance process.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.