What Issues Should Be Noted During the First Maintenance?

2 Answers
EmiliaRose
09/07/25 5:30am
For the first car maintenance, it is important to fully understand whether your car has any other faults or issues before the maintenance and record them. When registering for the first maintenance, inform the 4S shop about these items that need to be checked. Below are specific precautions for the first car maintenance: 1. Before Maintenance: Read the user manual to get a general idea of the maintenance content and identify any items that require additional payment. A few days before the maintenance, call the 4S shop to schedule an appointment. Organize the items in your car; it's best to keep valuable small items at home or carry them with you, such as mobile phones, laptops, Bluetooth headphones, etc., to prevent loss. 2. During Maintenance: Prepare the user manual (must bring), driver's license, digital camera or a phone with a camera (it's best to bring one, as it may be useful). For the first maintenance, it's advisable to bring along an experienced driver or at least a relative or friend to help out. 3. When Registering for Maintenance: After the vehicle enters the maintenance workshop, it's best to follow along personally. This allows you to observe the entire maintenance process, especially to supervise the materials used by the maintenance workers and their work attitude. You can also learn some simple repair techniques and understand the basic structure of your car, which is very practical for handling unexpected emergencies on the road in the future. 4. After Normal Maintenance: Urge the maintenance technician to address any other faults identified beforehand. Ensure that any necessary parts are replaced and not just patched up, as this is within the free warranty period.
Was this review help?
5
5
Share
StCamilla
09/19/25 4:45am
Last time I went for the first maintenance, I specifically checked the maintenance manual in advance. In fact, the first maintenance after the new car's break-in period is crucial. The main items include changing the engine oil and oil filter, checking if the chassis screws are loose, if the tire pressure meets the standard, and cleaning the air filter. Remember to bring the free maintenance coupon given at the time of purchase. Many 4S stores will promote additional items such as engine cleaning, but new cars don't need that at all. Before maintenance, put away valuables in the car. The whole process takes about two hours, and you can stay in the lounge to observe the maintenance process through the monitor. After it's done, remember to check the work order details to confirm that all free items have been completed before signing. Finally, take the car for a spin to feel the power changes after the oil change.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

At what engine temperature does the Qidian 150G1's fan start working?

Qidian 150G1's fan starts working when the engine temperature reaches 90 degrees. Definition of motorcycle engine: A motorcycle engine is a mechanical device that ignites the fuel-air mixture entering the cylinder, converting the thermal energy generated by combustion into mechanical energy. The crankshaft then transmits this power through the transmission mechanism to the motorcycle's rear wheel, transforming it into the driving force for the vehicle. Engine classification: Based on different energy conversion methods, engines can be categorized into electric motors (electrical energy → mechanical energy), hydraulic machines (water energy → mechanical energy), wind turbines (wind energy → mechanical energy), nuclear engines (nuclear energy → mechanical energy), and heat engines (thermal energy → mechanical energy), etc. Heat engines can be further divided into external combustion and internal combustion types. The motorcycle engine is one type of heat engine.
13
0
Share

Why Does a Motorcycle Need a Little Throttle to Start?

The reason a motorcycle needs a little throttle to start is due to the belt drive system, improper carburetor adjustment, or the need for carburetor cleaning. Belt Drive System: The belt drive system has particularly high resistance when the engine is cold. If the idle circuit's fuel concentration is insufficient and the carburetor's idle speed is set too low, the engine cannot maintain idle speed in a cold state. Sometimes, it requires manually applying a slight throttle until both the engine and the belt warm up. Improper Carburetor Adjustment: Some motorcycles are otherwise normal but have a misadjusted carburetor, requiring readjustment. Occasionally, there is no fault, but the throttle screw on the carburetor has loosened. Due to design flaws, the throttle screw on scooter carburetors is more prone to loosening and shifting under prolonged engine vibration. Carburetor Needs Cleaning: Some carburetors have their idle circuits clogged by fine impurities in the fuel, causing the engine to rely on the main fuel circuit for starting. This situation is rare but does occur occasionally. The engine may exhibit unusual behavior, typically manifesting as difficulty starting, unstable idle speed, and unresponsive adjustments to the carburetor's idle circuit.
5
4
Share

What is the working principle of the carburetor needle in a motorcycle?

The working principle of the carburetor needle in a motorcycle is to atomize gasoline and mix it with air to form a combustible mixture, which is then delivered to each cylinder. The motorcycle carburetor includes: The motorcycle carburetor has two needles, namely the main needle and the float needle. The main needle primarily controls the fuel flow rate. Typically, when referring to adjusting the needle, it specifically means adjusting the main needle. Method for adjusting the carburetor needle: When the vehicle experiences poor fuel supply, the clip position can be adjusted downward. If the vehicle shows signs of incomplete combustion, the clip position needs to be adjusted upward. The combustion condition of the vehicle can be visually indicated by the color of the spark plug. If the spark plug appears black, it generally indicates incomplete combustion, and the needle clip position should be adjusted upward in such cases.
5
0
Share

Do new energy vehicles require grounding for charging?

New energy vehicles require grounding for charging. Solution: Purchase a grounded charger. Factors affecting grounding resistance: Size of grounding electrode (length, thickness), shape, quantity, burial depth, surrounding geographical environment (such as flat ground, ditches, or slopes being different), soil moisture, texture, etc. To ensure proper equipment grounding, measuring grounding resistance with instruments is essential. Grounding resistance measurement methods can be divided into: Voltage-current meter method, ratio meter method, and bridge method. Based on specific measuring instruments and electrode arrangement, they can be categorized as: hand-cranked ground resistance meter method, clamp-on ground resistance meter method, voltage-current meter method, three-electrode method, and four-electrode method.
19
1
Share

Can a Modified One-Key Start System Be Paired with a Key?

Modified one-key start systems can be paired with keys. Solution: Visit a 4S store to replace the remote key. Simply match the code on the key with the one in the car. A remote key utilizes the wireless remote function of the central locking system, allowing you to unlock and lock the doors from a distance without inserting the key into the lock. Cars typically come with two keys—one for regular use and one as a spare. The method to modify a one-key start system is as follows: Install the induction device on the door handle, disassemble the dashboard and door panel, take out the wiring harness to be connected, solder the one-key start device wiring to the connector, place the original car's start switch in the ACC position, plug in the prepared wiring harness, and match the key.
12
4
Share

Does the Exhaust Gas Recirculation (EGR) Valve Affect Fuel Consumption?

Exhaust Gas Recirculation (EGR) Valve does affect fuel consumption. Causes of EGR Valve Damage: Poor quality of the EGR valve itself, improper maintenance, poor fuel quality, aging of the EGR valve. Effects of EGR Valve Damage: When the EGR valve is damaged, it cannot control the amount of exhaust gas recirculation. Excessive exhaust gas entering the recirculation system will affect the mixture concentration, leading to issues such as difficulty starting the engine, engine shaking, unstable idle speed, and weak acceleration, all of which impact engine performance. A damaged EGR valve can also cause the engine to burn oil, resulting in blue smoke from the exhaust pipe. The EGR valve functions to separate oil and gas; when working properly, it only draws in exhaust gas and not oil. If the EGR valve is damaged, it loses this oil-gas separation function, potentially drawing oil into the combustion chamber along with the air, leading to oil burning and blue smoke emission.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.