What Issues Might Arise After Replacing the Rear Windshield?

1 Answers
StAvery
07/30/25 3:47am
At high speeds, wind can enter through the gaps between the windshield and the car body, leading to increased interior noise. Precautions after windshield replacement: Do not wash the car for three days after replacing the windshield, and remove the tape securing the windshield position only after three days; try to avoid driving on excessively bumpy roads, and refrain from sudden braking or rapid acceleration; do not insert parking permits or other cards into the gap between the front windshield and the dashboard; avoid driving on highways, keeping the maximum speed below 80 km/h; do not apply window tint within seven days. Maintenance methods: Regularly inspect the wiper blades, as they are one of the primary causes of front windshield damage. Over time, wiper blades can age, and if the end of the wiper arm directly rubs against the windshield, it may not only fail to clean rainwater effectively but also scratch the glass. Additionally, wiper blades that accumulate dust can scratch the front windshield, leaving small marks and fine lines on the glass.
Was this review help?
4
3
Share
More Forum Discussions

How many types of cars are there in the world?

Currently, the main independent brands are as follows. Here are the specific introductions to the relevant content: 1. Classification by origin: Japanese: Toyota, Honda, Nissan, Mazda, Mitsubishi, Suzuki, Subaru, etc. German: Mercedes-Benz, BMW, Audi, Porsche, Volkswagen, etc. American: General Motors including its brands Buick, Cadillac, and Chevrolet, Ford, Chrysler, and Jeep, etc. European: Peugeot Citroën, Fiat, etc. 2. Classification by vehicle type: mainly micro cars, hatchbacks, sedans, compact SUVs, mid-size SUVs, large SUVs, and commercial vehicles, etc. 3. China's four major automobile groups: China Changan Automobile Group—Independent brands: Changan, Changhe, Hafei, Landwind. FAW Group—Independent brands: Hongqi, Besturn, Xiali, Jiaxing, Jiabao. SAIC Group—Independent brands: Roewe, Wuling. Dongfeng Motor Group—Independent brands: Dongfeng.
19
3
Share

What is the function of the high-pressure fuel pump?

High-pressure fuel pump function is: to increase fuel pressure for high-pressure injection to achieve atomization effect. The main purpose of the high-pressure fuel pump is to serve as the power source for hydraulic devices such as jacks, heading machines, extruders, and cotton gins. Regarding the working principle of the high-pressure fuel pump as follows: 1. Suction stroke: During the suction process, the downward movement of the pump piston provides suction power while opening the intake valve, allowing fuel to be drawn into the pump chamber. In the final third of the pump stroke, the fuel pressure regulator valve is energized, keeping the intake valve open during the initial upward movement of the pump piston for fuel return. 2. Return stroke: To control the actual fuel supply, the intake valve remains open during the initial upward movement of the pump, with excess fuel being pushed back to the low-pressure side by the pump piston. The pressure accumulator absorbs fluctuations generated during this process. 3. Pumping stroke: At the beginning of the pumping stroke, the fuel pressure regulator valve is de-energized, causing the intake valve to close under the combined action of rising pump chamber pressure and the valve's closing spring. The upward movement of the pump piston creates pressure in the pump chamber, and when this pressure exceeds the rail pressure, the outlet valve opens to pump fuel into the rail.
15
5
Share

What Causes a Car Radiator to Boil Over? How to Handle It?

There are several reasons and solutions for a car radiator boiling over: 1. Radiator malfunction: When repairing by welding, the damaged cooling core tubes are blocked, reducing the water flow area and decreasing the water output from the upper chamber. 2. Deformation of radiator cooling core tubes: The inner layer of the radiator inlet hose delaminates, reducing the hose's flow cross-section, obstructing water flow, increasing resistance, and decreasing water output from the upper chamber. 3. Excessive scale in the radiator: Core tubes are clogged with sludge, scale, or debris, hindering water circulation. The flow resistance in the upper chamber increases, reducing water volume. Cylinder gasket erosion, cylinder liner cracks, or high-pressure gas entering the water channel can also cause issues. 4. Overly soft water pump inlet hose: The vacuum suction from the water pump causes the hose to collapse; reversed fan blades, broken belts, or faulty water pump impellers prevent forced water circulation. Reduced cooling water circulation area and increased temperature decrease the hose's water capacity, causing the excess cooling water to be expelled from the radiator filler neck, resulting in water spraying.
6
3
Share

What is the best engine oil for Toyota Crown?

Toyota Crown uses 5W-40 engine oil. Below are the detailed specifications of the Toyota Crown: 1. Body dimensions: The Crown is positioned as a mid-to-large-sized sedan, featuring a 4-door, 5-seat configuration. The vehicle measures 4910mm in length, 1800mm in width, and 1455mm in height, with a wheelbase of 2920mm. 2. Interior cabin: It comes equipped with a multifunction steering wheel, dual-round instrument cluster, and a floating + traditional dual-screen center console. 3. Powertrain options: The Crown offers multiple powertrain options including a 2.0T, 2.5L hybrid, and 3.5L V6. The 2.0T engine is paired with an 8AT transmission, while the 2.5L and 3.5L are exclusively available in hybrid versions. Additionally, the 2.5L model offers an optional four-wheel-drive configuration.
11
4
Share

What is the abbreviation for Hong Kong license plates?

Hong Kong and Macau license plates are abbreviated as Yue Z in mainland China, also known as Guangdong-Hong Kong cross-border license plates. Guangdong-Hong Kong cross-border license plates refer to license plates that allow free travel between Hong Kong and mainland China after being issued, and are divided into FV license plates and Yue Z license plates. The following are the application requirements for Guangdong-Hong Kong cross-border license plates: 1. The first category is for vehicles entering mainland China from Hong Kong via the bridge and obtaining mainland license plate quotas: For overseas investment enterprises (individuals) investing in our province, regardless of the investment amount, enterprises in the province that have accumulated a tax payment of more than 100,000 RMB within 3 years (including the year of application) can apply for 1 commercial vehicle quota for the Hong Kong-Zhuhai-Macao Bridge Port; those with a tax payment of more than 500,000 RMB can apply for a second vehicle; those with more than 1 million RMB can apply for a third vehicle. 2. The second category is for vehicles entering Hong Kong from mainland China via the bridge and obtaining Hong Kong license plate quotas: State-owned enterprises, collective enterprises, and private enterprises approved in our province that have accumulated a tax payment of more than 1 million RMB within 3 years (including the year of application).
20
1
Share

How to Solve Uneven Tire Wear on Cars?

Solutions for uneven tire wear on cars: 1. Perform wheel alignment: Inaccurate wheel alignment, such as incorrect toe adjustment, can cause uneven tire wear. The front wheels tilt slightly inward at an angle similar to pigeon toes. If the angle is too large or improperly adjusted, uneven tire wear will occur. In this case, wheel alignment is needed to solve the problem. 2. Adjust tire pressure: Excessive tire pressure not only affects ride comfort but also causes the middle of the tire to wear unevenly. On the other hand, insufficient tire pressure can damage the tire, even the wheel hub, and lead to uneven wear on both sides of the tire. Therefore, it is necessary to adjust the tire pressure according to the manufacturer's recommended value. Additionally, to reduce uneven tire wear caused by abnormal tire pressure, check the tire pressure at least once a month. 3. Replace old tires: When tires are severely worn, replacing only one or two tires will result in different friction levels among the four tires, which can also cause uneven wear. 4. Replace high-quality wheel hubs: When a wheel hub is deformed, it can also lead to uneven tire wear, and the hub should be replaced. The cause of hub deformation may be continued driving with insufficient tire pressure. 5. Replace rubber bushings: If all tires show regular wear on the same side, it indicates that the thrust rod rubber bushing is damaged and needs to be replaced.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.