What is Wey Brand?

1 Answers
LaHayden
07/30/25 6:18am
Wey is a Chinese luxury SUV brand, with product lineup including the VV7, VV6, VV5 and VV7 PHEV new energy series models. VV7 body dimensions: length 4760mm, width 1931mm, height 1655mm, wheelbase 2950mm, body structure is 5-door 5-seat SUV. VV7 powertrain: equipped with 2.0T turbocharged engine, paired with 7-speed dual-clutch transmission, maximum horsepower 227hp, maximum power 167kW, maximum power speed 5500rpm, maximum torque 387N·m.
Was this review help?
9
0
Share
More Forum Discussions

What is the reason why an automatic transmission car does not move when shifted to R gear without pressing the accelerator?

There may be several reasons why an automatic transmission car does not move when the accelerator is pressed: The clutch is not fully engaged; the handbrake is not released; the gear is stuck and not fully engaged; the clutch friction plate is worn out. The correct driving method for an automatic transmission car: Start the engine with the gear lever in P position, and you must press the brake pedal before shifting from P to other gears. When starting, push the gear lever to a lower gear (i.e., 2 or 1, some may have 3), and after the speed increases to a certain level, shift to D gear for normal driving. If cruising at high speed on the highway, you can use the O/D gear to save fuel. When starting, the following points must be noted: Shift gears only after pressing the brake pedal, and check if the gear lever position is correct; when starting over bumps or steps, it is best to press the brake pedal with the right foot, slightly release the right foot while the car is stationary, and slightly press the accelerator pedal at the same time. Lift the right foot immediately after crossing the step and lightly press the brake pedal to prevent severe shaking of the vehicle; do not let the engine speed be too high when starting. Especially in winter, when the air conditioning rapid acceleration device is working, the idle speed may exceed 1500r/min (usually 1000r/min), which can cause strong vibration and gear impact, leading to a sudden start. Therefore, wait for the engine speed to drop before starting.
2
4
Share

What are the reasons for BMW keyless entry failure?

Reasons for BMW keyless entry failure: 1. The car battery is dead; 2. The key fob battery is dead. Additional information: Car keyless entry system: Abbreviated as PKE (PASSIVE-KEYLESS-ENTER), this product adopts the world's most advanced RFID radio frequency technology and the most advanced vehicle identity coding recognition system. It pioneers the development solution of miniaturized, low-power RF antennas, successfully integrates remote control systems with keyless systems, and maintains traditional vehicle circuit protection. It truly achieves a dual RF system with dual anti-theft protection, providing maximum convenience and safety for car owners.
12
2
Share

Is it mandatory to equip a fire extinguisher in the car?

The Road Traffic Safety Law, Article 21 stipulates that before driving a motor vehicle on the road, the driver should carefully inspect the safety technical performance of the vehicle; it is prohibited to drive a motor vehicle with incomplete safety facilities or components that do not meet technical standards, which may pose safety hazards. According to the 'Safety Technical Conditions for Motor Vehicle Operation' (GB7258-2012), vehicles (excluding three-wheeled vehicles without a cab) should be equipped with a triangular warning sign. Passenger vehicles (those carrying more than 9 people) and school buses must be equipped with fire extinguishers. From this, it can be seen that school buses and passenger vehicles are required to have on-board fire extinguishers, while private cars are not mandated. However, it is still recommended that car owners keep a fire extinguisher in their vehicles as a precaution. The usage method of an on-board fire extinguisher is as follows: 1. In case of a car fire, the first priority is to stay calm, not panic, analyze the situation, and then make a quick judgment. 2. When holding the fire extinguisher, stand at the upwind side of the fire to avoid being scalded, ensuring your own safety before attempting to put out the fire. 3. Pull out the safety pin, hold the nozzle, and grip the pressure handle with the other hand. Aim the nozzle at the base of the flame to quickly extinguish the fire.
16
5
Share

Can National IV Emission Standard Vehicles Still Be Transferred and Licensed?

Local vehicle transfers can proceed normally as long as the vehicle hasn't reached mandatory scrapping standards. However, for used cars being transferred from other regions, they must comply with the local emission standard policies to be eligible for transfer. The transfer process is as follows: 1. Go to the relevant department's transfer hall, present the required documents to obtain the "Used Motor Vehicle Sales Contract", and have both parties fill out their respective information. (Take all completed documents to process the "transfer acceptance") 2. Drive the vehicle to the transfer inspection area where staff will conduct checks, take imprints, remove license plates, and take photos. After obtaining vehicle photos, attach them to the inspection record form. (After completion, park the vehicle and proceed to the transfer hall for further procedures) 3. Take a number from the dispenser and queue with relevant documents to pay transfer fees. 4. The owner should take all related files back to the local vehicle management office where the vehicle will be registered and complete the licensing procedures.
16
3
Share

Will I get points deducted for accidentally driving over a solid line?

Strictly speaking, according to traffic regulations, driving over a solid line is considered a traffic violation that can result in fines and point deductions. However, in many places, as long as no traffic accident occurs, traffic police generally do not penalize this type of violation. Relevant information about the driver's license test is as follows: 1. Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can one obtain a driver's license and legally operate a motor vehicle. 2. Content: The motor vehicle driver's test consists of three parts: the road traffic safety laws and regulations and related knowledge test (also known as the "theory test", referred to as "Subject 1"), the field driving skills test (commonly known as the "parking test", referred to as "Subject 2"), and the road driving skills and safe driving common sense test (commonly known as the "road test", referred to as "Subject 3"). The test content and passing standards are uniform nationwide, with corresponding test items specified according to different types of vehicles.
3
5
Share

What does the snowflake inside a triangle indicate?

When a snowflake icon appears on the car dashboard, it indicates a frost warning. Below is an introduction to the snowflake icon on the car dashboard: The appearance of the snowflake icon indicates that the outside temperature is relatively low, reminding the driver to drive cautiously and be aware of frost. Meaning of the snowflake icon: It serves as a warning and does not indicate a vehicle malfunction. Generally, the snowflake light on the dashboard is yellow when the temperature is between 0-4°C and turns red when the temperature is below 0°C. It is important to note that in cold weather, the vehicle should be fully warmed up before driving to avoid increased engine wear. The meaning of the triangle with a snowflake warning light: This warning light also indicates that the outside temperature is low, primarily serving as a reminder. Some vehicle models may accompany this with a "beeping" sound. In winter, if the road is icy, it is best to maintain a speed of 20-30 km/h to prevent the car from skidding. On icy roads, braking performance is only one-fourth of that on normal roads, so the braking distance becomes longer. In such conditions, engine braking should be used appropriately to control the vehicle. Snow Mode: Snow Mode is a control mode of the car's automatic transmission, which can be understood as an automated program that helps you better control the car in snowy conditions. Its main function is to limit the engine's torque output and the transmission's gear ratio, thereby reducing the likelihood of the car skidding while driving in snowy conditions.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.