What is Vehicle and Vessel Tax? Can it be avoided?

What to Do When the Clutch Plate is Burnt?

The solution for a burnt car clutch plate is to replace it with a new one. The reasons for the clutch plate burning are as follows: 1. Improper operation by the driver, such as half-engaging the clutch, causing continuous friction between the clutch plate and the pressure plate or flywheel, leading to high temperatures. 2. The driver abruptly releasing the clutch pedal during operation, causing the clutch plate to break down and damage the surface of the pressure plate. 3. The clutch plate has been used for too long or has exceeded the recommended mileage, leading to natural aging and wear. 4. The clutch plate material is substandard, resulting in premature damage. 5. The working principle of the clutch plate is: it transmits power through axial compression and release. The greater the axial pressure, the greater the friction generated, ensuring smoother and more stable operation of the extruder without slipping, jamming, or self-detaching.

10

4

Share

How much charge can idling for half an hour provide to the battery?

Idling for half an hour can charge the battery by about twenty percent. Automatic battery charging: Whether the car is in motion or idling, the battery will automatically charge. The engine directly drives the generator via a belt, so once the engine starts, the electricity generated by the alternator undergoes rectification and voltage regulation before directly charging the car battery. However, if the battery is severely depleted to the point where it cannot start the engine, a jump-start may be required. Precautions for idling charging: Avoid using other power-consuming devices during idling charging. When the car battery is low and being charged by idling, although the current is low, it is sufficient. But if high-power devices like air conditioning, high beams, or car audio systems are used during charging, they may exceed the alternator's maximum output power. This could overdraw the already low battery, leading to permanent damage.

12

5

Share

Should I Go to a 4S Shop for an Oil Change?

For oil changes, if the car is under warranty, it is necessary to go to a 4S shop; otherwise, the 4S shop will not provide warranty coverage for any issues that arise. If the car is not under warranty, you can go to a repair shop or change the oil yourself. In other words, it is not mandatory to go to a 4S shop for an oil change. The methods and precautions for changing the oil are as follows: Methods for changing the oil: First, use a jack to lift the vehicle, then unscrew the oil drain bolt to drain the oil, replace the oil filter and gasket, and finally, add the appropriate new oil to the engine in the engine compartment. Precautions for changing the oil: The choice of oil should be based on the engine's requirements. There is no need to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements.

20

5

Share

Does a temporary license plate have to be processed by the owner?

Temporary license plates do not necessarily have to be processed by the owner; they can be handled by a proxy. When applying for a temporary license plate for a vehicle, the relevant requirements must be followed, including filling out the temporary vehicle registration form. Required documents include the identity proofs of both the vehicle owner and the proxy, the vehicle's factory certificate, the import certificate for imported vehicles, as well as the vehicle's chassis number and engine number. Having all the materials prepared in advance will make the process smoother and prevent delays in normal driving. Conditions for applying for a temporary license plate: 1. If purchasing a vehicle in another region and needing to drive it back to the local area, a temporary license plate must be applied for at the vehicle management office in the purchase location. For cross-province vehicle purchases, a temporary license plate with a brown-yellow background, black characters, and black borders must be applied for. 2. When transferring vehicle registration, if the official license plate has already been surrendered, a temporary license plate must be applied for at the local vehicle management office.

8

4

Share

How to Use Car Horn Properly?

Correct usage of car horn is as follows: When driving on mountain roads with many sharp turns and S-curves, honk the horn before entering these curves to alert oncoming vehicles. Slow down and honk in advance when approaching intersections, forks, towns, and busy road sections; do not use the horn to alert pedestrians or non-motorized vehicles in front of the vehicle or at intersections; horn use is prohibited in hospitals, residential areas, schools, tunnels, and garages. Additional tips: 1. On narrow two-lane roads such as rural or mountain paths where overtaking requires using the opposite lane, it is advisable to honk before overtaking to alert the vehicle ahead and avoid accidents. 2. When driving on vast rural roads, do not hesitate to use short horn blasts frequently to alert distant pedestrians and vehicles. Additionally, slow down and honk in advance when approaching intersections, forks, towns, and busy road sections (except in no-horn zones).

9

5

Share

Should You Engage the Handbrake or Shift Gears First When Starting a Manual Transmission Car?

When starting a manual transmission car, you should shift into gear first, then release the handbrake. The correct procedure for starting a manual transmission car: After getting into the car, shift the gear lever into the starting gear. Sound the horn, turn on the turn signal, and simultaneously observe the front, sides, and rearview mirrors to check for any pedestrians or vehicles passing by, ensuring there are no obstacles to starting, with particular attention to safety. Firmly hold the steering wheel, activate the left turn signal, and release the parking brake lever. Reasons for stalling when starting a manual transmission car: Stalling often occurs because the clutch is released too quickly. When starting on flat ground, first shift into neutral, start the car, and gently press the clutch pedal. Then shift into first gear and slowly release the clutch. Finally, when the driver feels the critical point, lightly press the accelerator while holding the clutch steady. This method makes it less likely to stall when starting.

5

2

Share

What is Vehicle and Vessel Tax? Can it be avoided?

What to Do When the Clutch Plate is Burnt?

How much charge can idling for half an hour provide to the battery?

Should I Go to a 4S Shop for an Oil Change?

Does a temporary license plate have to be processed by the owner?

How to Use Car Horn Properly?

Should You Engage the Handbrake or Shift Gears First When Starting a Manual Transmission Car?

How Long Does the Subject 3 Test Take?

Where is the cigarette lighter fuse located in the classic Focus?

Why can't the light in the back seat of the Golf be turned off?

What Causes a Motorcycle to Stall at High Temperature Idle?