What is traffic violation code 1344?

1 Answers
McZoe
07/24/25 7:43am
1344 refers to the traffic violation of motor vehicles disobeying prohibition sign instructions, which is punishable by a fine and 3 demerit points according to the Road Traffic Safety Law. Violations such as making U-turns at no-U-turn or no-left-turn signs/markings, not following road signs, or driving the wrong way on one-way streets all constitute violations of prohibition sign instructions. Prohibition signs are a main category of traffic signs that prohibit or restrict vehicle actions, including no parking, no entry, no left turns, no honking, speed limits, weight limits, etc. With few exceptions, prohibition signs feature white backgrounds, red circles, red bars, black symbols, and symbols overlapping the bars. Their shapes include circles, octagons, and downward-pointing equilateral triangles.
Was this review help?
12
4
Share
More Forum Discussions

What is the fuel consumption of the Volkswagen Lamando?

The comprehensive fuel consumption of the Volkswagen Lamando is 5.4-5.6L/100km. Currently, there are 3 models of the Volkswagen Lamando on sale. The comprehensive fuel consumption of the Fashion Edition is 5.4L/100km. The Comfort Edition and Luxury Shadow Edition have a comprehensive fuel consumption of 5.4-5.6L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.4-7.6L/100km. Specific factors affecting a car's fuel consumption are as follows: Car weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV model weighing about 1.5 tons has a fuel consumption of 8.5 liters. Different weights result in different fuel consumption levels. Drag coefficient: A higher drag coefficient increases fuel consumption during driving. Cars with better aerodynamics have lower drag coefficients, leading to lower fuel consumption. Economical RPM: During driving, the engine has a most economical torque output point. If the car's speed is consistently maintained at this torque output point, fuel consumption can be significantly reduced. Generally, small-displacement cars reach this point at about 70 km/h, while large-displacement cars reach it at about 100 km/h. Maintaining speed within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption.
1
4
Share

What Causes Soft Brakes in Mercedes-Benz?

Causes of soft brakes in vehicles are as follows: Air in the brake lines: Brake fluid is the medium for transmitting force in the braking system. If air enters the brake lines, the brake fluid under high pressure will appear insufficient in strength. Although there is still braking force, the maximum braking force is significantly weakened. In this case, the braking system should be promptly bled at a repair facility. The method to determine if there is air in the brake lines is to press the brake pedal several times with the engine off until the brakes become firm, then hold the pedal down. If it remains firm, it indicates normal conditions; if the pedal slowly sinks, it means air has entered the brake system. Brake fluid not replaced for a long time: If the brake fluid is not replaced in time, it will contain excessive impurities and moisture, which will affect the transmission of braking force. Therefore, brake fluid must be replaced regularly, and it is advisable to conduct a moisture content test at a repair facility when possible. Oil leakage or overly soft brake materials: Generally, oil leakage from the brake master cylinder or brake lines will cause the vehicle's brakes to become soft. If the brake material is too soft, high-temperature stability will deteriorate, which will also result in soft brakes.
13
5
Share

Is It Normal for the Volkswagen Magotan to Burn Engine Oil?

It is not normal for the Volkswagen Magotan to burn engine oil. Depending on the vehicle's usage conditions, the engine oil consumption rate may vary for each engine, and it will also change as the engine ages. Regularly check the engine oil level: Depending on the driving style and vehicle usage conditions, the maximum oil consumption rate should not exceed 0.5l/1,000km. During the first 5,000km of a new car, the oil consumption rate may be slightly higher than this value. Therefore, it is essential to regularly check the engine oil level, preferably when refueling and before long-distance trips. The engine oil level must be maintained within the normal range: During long-distance highway driving in summer, when towing a trailer, or driving in mountainous areas, the engine operates under harsh conditions, and the oil level must be kept within the normal range.
1
2
Share

Where is the Epica intake air temperature sensor located?

The Epica intake air temperature sensor is located on the intake pipe or inside the mass air flow sensor. The intake air temperature sensor is also a two-wire sensor. One wire of the intake air temperature sensor is the 5V voltage THA supplied by the engine ECU, and the other wire is E2, which is grounded inside the engine. Intake air temperature sensor: It is a negative temperature coefficient thermistor. When the temperature rises, the resistance decreases; when the temperature drops, the resistance increases. As the resistance in the circuit changes, it causes voltage variations, thereby generating different voltage signals to complete the automatic operation of the control system. When the engine is cold, the signal from the intake air temperature sensor is basically the same as that from the engine coolant temperature sensor. When the engine is warm, its signal voltage is approximately 2-3 times that of the coolant temperature sensor. Function: Its main function is to detect the engine's intake air temperature and convert it into a voltage signal, which is then input to the ECU as a signal for fuel injection correction.
14
1
Share

What is the weight of the Bora Legend?

The Bora Legend has 4 models currently on sale, with a curb weight ranging from 1240-1275kg. It is a 4-door, 5-seater sedan with dimensions of 4663*1815*1462mm. Among its peers, the 2021 Xingrui has a curb weight of 1500kg, while the 2021 Elantra weighs 1208kg. In terms of powertrain, the 2019 Bora Legend offers four models: Automatic Leading, Automatic Fashion, Manual Leading, and Manual Fashion. These are equipped with a 1.5L naturally aspirated engine paired with a 6-speed automatic transmission. Other models feature a 1.5L naturally aspirated engine with a 5-speed manual transmission. All engines have 4 cylinders and utilize front-wheel drive. For other configurations, some or all 2019 Bora Legend models come with features such as front/rear side airbags, ISOFIX child seat anchors, driving assistance imaging, rear cross-traffic alert, and driving mode selection. It's worth noting that the Bora Legend is primarily supplied to bulk buyers like taxi companies and ride-hailing services. The fuel consumption range for the 1.5L manual transmission is 5.57-7.23L/100km, with an average of 6.41L/100km. The 1.5L automatic transmission has a fuel consumption range of 6.31-8.15L/100km, averaging 7.24L/100km.
16
2
Share

What is the fault when the EPC light is on in Chery Tiggo 5?

Chery Tiggo 5 EPC light on indicates that there may be a fault in the electronic throttle system, which could affect the normal operation of the vehicle. Introduction to EPC: The full English name of the EPC light is Electronic-Power-Control, meaning engine power electronic regulation (electronic throttle). In vehicle maintenance, faults indicated by the EPC light are relatively common. EPC warning light stays on: This indicates a fault in the engine management system or electronic control, often accompanied by unstable idle speed or engine cold start shaking. However, for domestic car owners, it is usually caused by the quality of domestic fuel and a dirty driving environment. It is recommended to drive to a maintenance service station for inspection as soon as possible. In most cases, cleaning the throttle can solve the problem.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.