···
Log in / Register

What is traffic violation 1344a?

5 Answers
McAlejandro
09/03/25 7:29am

Violation code 1344A refers to motor vehicles violating prohibition sign instructions. Traffic violation codes are encoding regulations established by the Ministry of Public Security for traffic violations committed by motor vehicles and pedestrians. By querying the new traffic violation codes, specific violations can be quickly identified, thereby speeding up the penalty process for traffic violations. Composition of traffic violation codes: Traffic violation codes consist of four digits, classified according to the principles in traffic laws. The sequence from left to right is: one-digit behavior classification code, one-digit penalty point classification code, and two-digit sequential code. The first digit represents the behavior classification code under the Road Traffic Safety Law; the second digit represents the penalty point classification code for traffic violations; the third and fourth digits are sequential codes indicating the order of violations within the same behavior category. Classification of traffic violation codes: The original traffic violation code table by the Ministry of Public Security includes 337 types of violations, comprising 175 for motor vehicles, 55 for non-motor vehicles, 30 for pedestrians and passengers, 28 for highways, and 49 under other regulations.

Was this review help?
5
3
Share
DeJaxson
09/16/25 2:04am

Last time I was driving, I accidentally ran a red light and later found out it was traffic violation code 1344a after getting fined. Simply put, 1344a refers to driving a motor vehicle in violation of prohibition sign instructions, such as making a left turn where it's prohibited or parking in a no-parking zone, and you'll get caught if you insist on doing so. In my case, I didn't notice the red light at the intersection, was caught by the camera, fined 200 yuan, and had 3 points deducted from my driver's license. This violation is quite common, especially at urban intersections or school zones, where it's easy to make a mistake if you don't clearly see the signs. The key is to pay more attention to road signs and follow the rules, otherwise your insurance might go up next time. I think if everyone drives a bit slower, pays more attention to the signs, and doesn't rush like I did, they can avoid such fines and troubles.

Was this review help?
19
0
Share
Expand All
MaciDella
10/30/25 2:40am

From the perspective of traffic regulations, violation code 1344a refers to motor vehicle drivers failing to comply with prohibitory signs, such as making a turn where straight-only is enforced or entering restricted zones. I've seen this happen a lot, mainly because drivers overlook conspicuous intersection signs, leading to being caught on camera or stopped on the spot. Typically, the fine ranges from 200 to 500 yuan with 3-6 penalty points, and in severe cases, the driver's license may even be revoked. My advice is to develop the habit of checking signs in advance while driving, slow down at intersections, and avoid blindly following traffic flow. It's also helpful to familiarize yourself with local traffic rules and consider installing navigation with alert features. Preventing such issues ultimately comes down to attentiveness and rule compliance – safe travel should always be the priority.

Was this review help?
4
4
Share
Expand All
JulianFitz
12/13/25 2:46am

My buddy recently made an illegal U-turn on a commercial street and got fined for violation code 1344a, which was pretty unlucky. Essentially, he violated a no-U-turn sign – the sign clearly prohibited it, but he still went ahead. He was fined 150 yuan and got 3 penalty points, which also affected his insurance renewal. Young drivers sometimes act too impulsively, prioritizing convenience over rules. I’ve noticed this kind of violation often happens in busy downtown areas or intersections—miss the sign, and you’re caught. Next time, we should remind ourselves to wait a few seconds, check the signs properly before moving, or else accumulating too many points might even require retaking the test. A simple adjustment in habits can save both hassle and money.

Was this review help?
18
5
Share
Expand All
Lukas
12/13/25 2:48am

Having driven for over a decade, I once encountered the 1344a violation. That time, I parked at the neighborhood entrance without noticing the no-parking sign and got fined. 1344a refers to acts of violating prohibition sign instructions, including running red lights and entering restricted zones. The lesson is that although these signs are prominent, lazy driving habits can easily lead to oversight. A fine of a few hundred yuan and penalty points just aren't worth it. I recommend both new and experienced drivers periodically review traffic rules, slow down at intersections to check signs carefully, and especially confirm before turning. Developing good habits helps avoid violations, ensuring safety and saving money.

Was this review help?
18
0
Share
Expand All
More Forum Discussions

Will overtaking at an intersection result in penalty points?

Overtaking at an intersection will result in a deduction of 3 points. Below are precautions for overtaking with a vehicle: 1. Observe vehicle conditions: Before overtaking, observe the road conditions ahead and try to choose a flat, straight road. Also observe the situation of the lane you intend to use by checking the left rearview mirror for any vehicles approaching from behind. 2. Light usage: Turn on the left turn signal, alternate between high and low beams, and sound the horn to alert the vehicle in front. Confirm that the vehicle ahead signals to yield before turning left. 3. Lane usage: When using the adjacent lane for overtaking, downshift and press the accelerator deeply. The reason for downshifting is that it provides faster throttle response during acceleration, allowing quicker speed increase.
12
1
Share

What are the impacts of changing from 16-inch rims to 18-inch rims?

18-inch rims are more prone to bulging, resulting in higher maintenance costs in the long run. While they can improve the vehicle's handling, they may negatively affect ride comfort. Below is a detailed introduction to the functions of car tires: 1. Supporting the entire weight of the vehicle: They bear the vehicle's load and transmit forces and moments in other directions. 2. Transmitting traction and braking torque: They ensure good adhesion between the wheels and the road surface, enhancing the vehicle's power performance, braking capability, and off-road ability. Together with the suspension system, they absorb impacts during driving and dampen resulting vibrations. 3. Preventing damage to vehicle components: They protect vehicle parts from severe vibrations and premature wear, adapt to high-speed performance while reducing noise during driving, and ensure safety, handling stability, comfort, and fuel efficiency.
20
1
Share

What are the advantages of a dual-clutch transmission?

The advantages of a dual-clutch transmission: 1. Direct gear shifting, minimal power loss, and low fuel consumption; 2. By alternating the work of two sets of clutches, seamless gear shifting is achieved. Relevant information about dual-clutch transmissions is as follows: 1. Introduction: DCT is the abbreviation for Dual-Clutch-Transmission, directly translated in Chinese as "dual-clutch transmission" (similar to DSG "Direct-Shift Gearbox," but DSG is only Volkswagen's terminology). Because it operates through two sets of clutches, it is generally referred to as a dual-clutch transmission. 2. Function: The clutch is located between the engine and the transmission, acting as the "switch" for power transfer from the engine to the transmission. It is a transmission mechanism that can both transmit and cut off power.
20
5
Share

Can Maintenance Be Done Outside of 4S Stores During the Warranty Period?

Maintenance can be performed outside of 4S stores during the warranty period, but if the owner opts for maintenance at an unauthorized repair shop during this time, the manufacturer may refuse compensation for any issues that arise. It is advisable to have maintenance done at a 4S store while the vehicle is still under warranty. The automobile three-guarantee policy stipulates that consumers must perform maintenance at manufacturer-authorized 4S stores during the warranty period to be eligible for the three-guarantee services. If maintenance has been conducted at a non-4S store, claiming three-guarantee services requires providing a series of documents, including the repair shop's qualifications, material lists, maintenance items, quality inspection reports, duplicate copies of the completion and factory qualification certificates, and purchase proofs, which can be quite cumbersome.
19
2
Share

What is the main function of the P gear in a car?

P gear is for parking. It uses a mechanical device to lock the rotating part of the car, preventing the car from moving. When the car needs to stay in a fixed position for a long time, or before leaving the vehicle after parking, you should engage the handbrake and push the lever into the "P" position. Relevant information about automatic transmission is as follows: 1. Introduction: Automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, there are six gear positions on an automatic transmission car, from top to bottom: P, R, N, D, S, L. 2. Automatic principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume more than 10% more fuel than manual transmissions. Whether it is a manual or automatic transmission, the more gears there are, the more fuel-efficient it is.
3
0
Share

Why is the Tire Pressure Warning Light On?

The reasons for the tire pressure warning light being on are as follows: 1. A punctured tire causing the tire pressure monitoring light to illuminate: This situation usually involves a very slow leak. If it's difficult to identify which tire is affected immediately, you can use a tire pressure gauge to measure the pressure (recommended: front tires 2.3 bar, rear tires 2.5 bar). If the pressure is low, inflate the tire and then observe the warning light. If it lights up again after a few days, the tire may need to be removed for inspection. 2. Sometimes the tire pressure monitoring light comes on due to overinflation: According to the international GBT2978-2008 standard, the recommended inflation pressures for passenger car tires are: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Therefore, if any tire exceeds 3.0 bar, it may trigger the tire pressure monitoring light.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.