What is Toyota?

What is the meaning of traffic violation code 13401?

Violation code 13401 means: A motor vehicle driven on the road fails to undergo regular safety technical inspection as required. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China", the penalty is: Demerit points: 3; Fine amount: 200 yuan; Other penalties: None. Traffic violation codes consist of four to five digits, classified according to the general principles of the traffic law. The order from left to right is: the first digit represents the behavior classification code, the second digit represents the demerit points classification code, the third and fourth digits represent the sequential code, and the fifth digit represents the item number. First digit: Behavior classification code, indicating the category of the violation in the Road Traffic Law; Second digit: Demerit points classification code, indicating the category of demerit points for the traffic violation; Third, fourth, and fifth digits: Sequential code, indicating the order of the violation within the same behavior category. For example: 13035—"1" indicates a motor vehicle violation, the second digit "3" indicates 3 demerit points, and "035" indicates the fifth item of the third violation under the 3-point deduction category. Explanation of behavior classification codes: Codes starting with "1" indicate motor vehicle violations, e.g., 1003. Codes starting with "2" indicate non-motor vehicle violations, e.g., 2002. Codes starting with "3" indicate pedestrian or passenger violations, e.g., 3030. Codes starting with "4" indicate highway violations, e.g., 4002. Codes starting with "5" indicate other regulations, e.g., 5005. Codes starting with "7" indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008. Codes starting with "8" indicate local regulations of cities (prefectures, autonomous prefectures, or leagues), e.g., 8606. There are four common methods to check motor vehicle violations: Visit the office halls of traffic police departments in various districts and counties to query through touch terminals; Log in to the external service website of the local public security traffic management bureau, find the vehicle violation query section, enter the license plate number and vehicle engine number, and click to query; Call the inquiry hotline (area code + 114); Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. The violation of driving a motor vehicle on the road without undergoing regular safety technical inspection can be handled through the Traffic Management 12123 app. After logging in, enter the violation processing business process, complete the handling, and make the payment.

13

5

Share

How many kilometers should the Santana timing belt be replaced?

The Santana timing belt should be replaced every 60,000 to 80,000 kilometers. The timing belt is a rubber component and falls under the category of consumable parts. In northern regions, it is recommended to replace it at 60,000 kilometers, preferably not exceeding 80,000 kilometers. In southern regions, it can be extended to 80,000 to 100,000 kilometers. The replacement interval should be referenced according to the vehicle's maintenance manual. When the engine timing belt shows signs of aging or cracking, it should be replaced promptly. Failure to replace it can lead to poor engine operation and, in severe cases, engine failure. Method for replacing the car timing belt: Remove the valve cover, detach the crankshaft pulley, and take off the timing chain cover. Rotate the crankshaft to the top dead center of the first cylinder, then tighten the crankshaft fixing screw to secure the crankshaft. Rotate the intake and exhaust camshafts. There are grooves at the rear of the camshafts; align the grooves of both camshafts evenly and insert the specialized tool. Remove the old chain and install the new one. The crankshaft pulley does not have a keyway. During installation, align the round hole on the pulley with the groove on the chain cover. The crankshaft position sensor is adjustable. Ensure the gap is properly adjusted during installation to avoid fault codes. Both the crankshaft sprocket and pulley can rotate freely.

20

4

Share

Where is the rearview mirror heating switch for the 2021 Elantra?

The rearview mirror heating switch for the Elantra is located on the vehicle's air conditioning panel. Here is some relevant information about the Elantra: Body: The body appears gentle and elegant, but the redesigned front face gives it an aggressive look. Two thick ridges on the engine hood extend forward to the small but prominent radiator grille, creating a strong sense of forward motion. Interior: The interior lines of the Elantra are relatively simple, with a beige color scheme that gives a fresh and clean feel. The center console and door armrests are accented with matte metal trim, adding a stylish touch. The cabin is notably wide, with ample legroom and headroom in both the front and rear seats.

2

4

Share

What is the real fuel consumption of the Mondeo 1.5t?

The Mondeo 1.5t currently has two models on sale: the Luxury and the Fashion, both with a combined fuel consumption of 7.3L/100km. The above figures are the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for combined driving conditions. The real fuel consumption is higher than this value, ranging from 9.63 to 12.03L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a high level of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits inside the engine. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio in the engine. Once it is damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If they are not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased carbon deposits in the engine. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.

6

4

Share

What are the differences between Hyundai ix25 and ix35?

The main differences between Beijing Hyundai ix25 and ix35 are as follows: Different body dimensions: The body dimensions of Beijing Hyundai ix25 are: length*width*height (mm), 4290*1780*1646 (mm), with a wheelbase of 2590mm; The body dimensions of Beijing Hyundai ix35 are: length*width*height (mm), 4435*1850*1680 (mm), with a wheelbase of 2640mm. Different powertrain configurations: Beijing Hyundai ix25 offers powertrain configurations including: 1.5L and 1.6L naturally aspirated engines, 1.4L turbocharged engine, matched with 4 types of transmissions: 6-speed manual, CVT continuously variable transmission, 6-speed automatic manual transmission, and 7-speed dual-clutch transmission; Beijing Hyundai ix35 offers powertrain configurations including: 2.0L naturally aspirated engine, 1.4L turbocharged engine, matched with 3 types of transmissions: 6-speed manual, 6-speed automatic manual transmission, and 7-speed dual-clutch transmission. Different suspension configurations: ix25's suspension configuration: front MacPherson strut independent suspension and rear torsion beam non-independent suspension; ix35's suspension configuration: front MacPherson strut independent suspension and rear multi-link independent suspension.

6

1

Share

Can Tesla be charged with 220V?

Tesla can be charged with 220V. Tesla can be charged using a 220V 10A/16A household socket. Charging specifications: Most ordinary households in China use 220V-40A electric meters, and sockets are mostly 10A or 16A. By using the charging cable provided by TESLA with the corresponding plug and selecting the charging current through the central control, charging can be initiated. Charging time: 220V 10A charges 2.2kwh per hour, allowing a range of 7-10 kilometers. It takes about 40 hours to charge from empty to full. 220V 16A charges 3.52kwh per hour, allowing a range of 10-18 kilometers. It takes about 25 hours to charge from empty to full. Precautions: Most Tesla owners will install a single-phase wall-mounted charger in their garage or parking space, using 220V AC power. This charging method takes relatively longer, charging 6-7 kWh per hour, which translates to approximately 40 kilometers. Using slow charging, it takes about 10 hours to fully charge.

20

2

Share

What is Toyota?

What is the meaning of traffic violation code 13401?

How many kilometers should the Santana timing belt be replaced?

Where is the rearview mirror heating switch for the 2021 Elantra?

What is the real fuel consumption of the Mondeo 1.5t?

What are the differences between Hyundai ix25 and ix35?

Can Tesla be charged with 220V?

What is the Mazda Atenza?

Does Tesla have CarPlay?

Where is FAW located?

What are the differences between Tacqua and T-Cross?