What is this car with a Mercedes front and Maybach rear?

1 Answers
DelAlexis
07/29/25 5:28pm
Mercedes-Benz cars with the Maybach logo are the Maybach S-Class, which is essentially the plus version of the Mercedes S-Class. The Maybach S-Class is larger, more luxurious, more expensive, and more powerful than the Mercedes S-Class. The Maybach S-Class has a length of 5466 mm, a width of 1899 mm, a height of 1500 mm, and a wheelbase of 3365 mm. Relevant information about car logos is as follows: 1. Introduction: "Car logo" is the abbreviation for automobile emblems, referring to the logos of various car brands, which often represent the automobile manufacturers. Car logos include: the car's trademark or factory logo, product labels, engine model and serial number, vehicle model and serial number, and vehicle identification code, etc. 2. Car logos must not be altered arbitrarily: Arbitrarily changing car logos violates the "Motor Vehicle Management Regulations": The car logo must match the vehicle model and is not allowed to be misused. Once discovered, it will be dealt with according to the national regulations on the technical conditions for the safe operation of motor vehicles.
Was this review help?
20
2
Share
More Forum Discussions

What engine is used in the Audi Q8?

Audi Q8 is equipped with a 3.0T turbocharged engine, whose function is to convert the thermal energy of gasoline into mechanical energy by burning and expanding gas in a sealed cylinder to push the piston to do work. Taking the 2019 Audi Q8 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 5006mm, width 1995mm, height 1704mm, wheelbase of 2995mm, fuel tank capacity of 85L, and curb weight of 2290kg. The 2019 Audi Q8 features a multi-link independent front suspension and a multi-link independent rear suspension, with a maximum horsepower of 340PS, maximum power of 250kW, maximum torque of 500Nm, and is paired with an 8-speed automatic transmission.
15
4
Share

How to adjust the height of the low beam headlights on an Audi Q5?

Audi Q5 low beam headlight height adjustment method: Turn on the headlights, align the vehicle with a wall, open the hood, and use a cross screwdriver to adjust the headlight height screw. Taking the 2020 Audi Q5 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4753mm, width 1893mm, height 1659mm, wheelbase 2908mm, fuel tank capacity 73L, and luggage compartment capacity 550L. The 2020 Audi Q5 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
1
0
Share

How to use the auto start-stop function in Audi Q3?

The usage of the auto start-stop function in Audi Q3 is: Press the auto start-stop button once after each ignition to turn off this function. When the engine is restarted after shutting down, the auto start-stop function will be activated again. Taking the 2021 Audi Q3 as an example, it is a compact SUV with body dimensions of: length 4481mm, width 1848mm, height 1616mm, wheelbase 2680mm, minimum ground clearance 152mm, and curb weight 1570kg. The 2021 Audi Q3 is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum torque of 250Nm, and maximum power of 110kW.
20
0
Share

Where is the tire pressure monitoring located?

Tire pressure monitoring is located on the dashboard in the driver's position. The method to reset the tire pressure monitoring is: 1. Ensure the vehicle's tire pressure is within the normal range; 2. Park the vehicle on a flat surface and turn off the engine; 3. Power on the vehicle and hold down the tire pressure monitoring button; 4. After 5 seconds, a warning sound will be heard, and releasing the button will successfully reset it. The functions of tire pressure monitoring are: 1. It will promptly alert when there is rapid or slow air leakage due to tire puncture; 2. It will warn when tire looseness causes unbalanced friction, leading to tire temperature reaching 70 degrees Celsius to prevent tire blowout; 3. If the tire has not been inflated for a long time and the pressure falls below the vehicle's set limit, it will alert to prevent low pressure from causing tire temperature rise and blowout.
20
3
Share

What does the HUD navigation mode mean?

The HUD navigation mode refers to the head-up display function, which projects navigation information onto the car's windshield. The purpose of the HUD head-up display is to project important driving information such as speed and navigation onto the windshield in front of the driver, allowing the driver to view these critical driving details without lowering or turning their head. The principle of HUD involves using optical reflection to project essential driving data onto the front windshield. This process consists of two main components: data processing and image display. This feature is more commonly found in cars and can also be achieved through aftermarket modifications. To project mobile phone navigation onto the car glass, a car mount needs to be fixed at the position of the air vent, and the driving route should be set in the mobile phone's map navigation. Notes: When adjusting the mobile phone navigation to HUD display mode, the phone's background should be entirely black, with only numbers and map information in white or other colors. This ensures the projected image on the windshield has a transparent background, displaying only the necessary information without obstructing the driver's view. Before enabling the "HUD mode" on the mobile phone navigation, locate the vehicle connection function in the car's monitor and activate the corresponding HUD mode; otherwise, the projection will not work.
13
1
Share

Is the transmission of the Trumpchi GS3 dry or wet?

The transmission of the Trumpchi GS3 is dry. The functions of the transmission are: 1. Changing the transmission ratio; 2. Expanding the torque and speed of the driving wheels; 3. Enabling the car to reverse; 4. Facilitating gear shifting or power output. Taking the 2021 GAC Trumpchi GS3 as an example, it is a compact SUV with body dimensions of: length 4350mm, width 1825mm, height 1685mm, and a wheelbase of 2560mm. The body weight is 1347kg. The 2021 GAC Trumpchi GS3 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 163PS, a maximum torque of 235Nm, and a maximum power of 120kW. It is paired with a 6-speed manual transmission.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.