What is the yellow dotted line at an intersection?

1 Answers
LaneLynn
07/30/25 10:54am
Crossroad yellow dotted lines are intersection guide lines. Relevant introductions are as follows: Function: They are auxiliary lines assisting vehicle turns - white dotted lines serve as left-turn auxiliary lines while yellow ones are for right turns. Such guide lines are generally installed at high-traffic or large intersections to clarify driving directions and alleviate traffic pressure. Notes: Left turns should keep to the left of white dotted lines, while right turns should stay to the right of yellow dotted lines. The white-left/yellow-right rule applies to both motorized and non-motorized vehicles.
Was this review help?
19
2
Share
More Forum Discussions

What is the actual fuel consumption of the Yidong 1.6L?

The comprehensive fuel consumption of the Yidong 1.6T is 5.7-5.8L/100km. Currently, there are six models of the Yidong 1.6T 2021 available for sale, including the Manual Luxury and Manual Elite models, with a comprehensive fuel consumption of 5.7L/100km. The CVT Elite and CVT Luxury models have a comprehensive fuel consumption of 5.8L/100km. The above figures are NEDC comprehensive fuel consumption, which are measured under the NEDC test cycle. The actual fuel consumption is higher than these values, ranging from 7.47-9.81L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion and work. Heavier cars also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine's computer may control higher RPMs to warm up the car, further increasing fuel consumption.
3
4
Share

What is the battery model of GAC Trumpchi GS4?

GAC Trumpchi GS4 uses a battery from the Varta brand. The following are the functions and working principles of the battery: Functions of the battery: During engine startup, it supplies power to the starting system, ignition system, electronic fuel injection system, and other electrical equipment of the car; when the engine is stopped or at low idle, it supplies power to the car's electrical equipment; when the power demand exceeds the generator's supply capacity, the battery also participates in power supply. Working principles of the battery: The negative electrode is made of lead plates filled with sponge-like lead, and the positive electrode is made of lead plates filled with lead dioxide, with 22-28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead is the negative electrode, undergoing oxidation and being oxidized to lead sulfate; lead dioxide is the positive electrode, undergoing reduction and being reduced to lead sulfate. When the battery is charged with direct current, lead and lead dioxide are generated at the two electrodes respectively.
13
2
Share

Why is the Sky Cloud Gray the Top Recommendation for Audi A4?

Audi A4 recommends the Sky Cloud Gray primarily because of significant improvements in both performance and appearance, along with a brand-new system. Appearance: The entire lineup comes standard with LED digital daytime running lights and segmented taillights, while the top-tier models are equipped with matrix LED headlights. The rear of the new A4L is equally striking, featuring streamlined horizontal lines that widen the overall visual effect to match the front end. The exhaust pipe design and rear bumper both adopt the inverted trapezoid design inspired by the RS series. Performance: In addition to the upgraded 12.3-inch Audi virtual cockpit, the traditional rotary knobs/buttons from the older models have been removed, replaced by a 10.1-inch floating MMI touch display.
13
3
Share

What causes the Peugeot 3008 1.6T to burn engine oil?

Due to the aging of valve seals and the loss of elasticity in rubber, the sealing becomes ineffective, allowing engine oil to seep into the combustion chamber and burn, thus being consumed. Consequences of burning engine oil: It leads to incomplete combustion of gases in the engine's combustion chamber, resulting in increased carbon deposits, reduced vehicle power performance, and sluggish acceleration. It also causes increased fuel consumption, more severe exhaust emissions pollution, possibly exceeding standards, and heavier financial burdens for the car owner. Solutions for burning engine oil: It is necessary to thoroughly inspect the entire engine oil lubrication system, remove carbon deposits from combustion residues, ensure the smooth operation of intake and exhaust valves, replace aged and damaged valve seals and crankshaft seals, and finally, reduce the gaps between the engine cylinder blocks to maintain an optimal engine temperature.
5
0
Share

What Causes Severe Oil Burning in Audi Vehicles?

Audi engine oil burning issues stem from excessive carbon deposits, aging seals, and more. Below are specific causes of engine oil consumption: Carbon buildup in piston grooves: Carbon deposits accumulating in piston grooves cause piston rings to stick together, preventing them from sealing properly. "Stuck" piston rings significantly reduce oil-scraping and sealing efficiency. Additionally, sludge can clog oil return passages, hindering normal oil circulation and increasing oil consumption. Piston and cylinder wall wear: Carbon deposits accelerate wear between pistons and cylinder walls, creating excessive clearance that allows oil to enter the combustion chamber. Aging valve stem seals: Corroded or aged valve stem seals lose their sealing capability. As one of the most vulnerable components in an engine, valve stem seals typically show deterioration after 100,000 kilometers of driving.
17
2
Share

What is the range of the BAIC Kitten?

The range of the BAIC Kitten is 150-300km. Below is an introduction about vehicle range: Range: Range can also be referred to as endurance capability, which indicates the total distance a vehicle or ship can travel continuously with maximum fuel reserves. For electric vehicles, the range refers to the distance traveled from a fully charged state of the power battery to the end of the test under standard conditions. It is an important economic indicator for electric vehicles. New energy vehicle range: Refers to the distance traveled at a constant speed under ideal road conditions, wind speed, temperature, etc., on a single full charge. Hybrid vehicles and lead-acid battery vehicles (low-speed vehicles) generally have a relatively shorter range.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.